Question about PreSonus INSPIRE 1394 External Sound System

1 Answer

Presonus Inpsire GT

I have the PS Inspire and the red power light typically turns blue when you have a connection... my just stopped working... have you heard of any problems with this product ?

Posted by on

  • johnnysound Feb 12, 2008

    Thanks very much...

    I took it back to the store and then I upgraded to the Firebox vs. the inspire... I can tell right off the top it's a much nicer product.

    Thanks for the help.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Sounds like you have a defective FireBox. If you can, exchange it at your retailer. If this is not possible, please contact to arrange for a return authorization.
Alternatively you can try to search out a solution to your problems on our forums HERE.

Posted on Feb 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to connect creative inspire t6100 to sony str - de475. is it possible?

No. As its own instructions probably point out, it accepts Line Level (pre-out) signals in the pattern of L/R; Sur L/Sur R; Center/Sub; which is typical of most PC soundcards that support 5.1 audio to powered speakers or other hi-fi.

The Sony has NO pre-outs.

Jul 25, 2011 | Creative Labs Inspire T6100 Computer...

4 Answers

When my PS 3 is powered on the red light stays on. When I press the ON button to turn it on, the red light blinks, turns yellow and then goes back to red.

  • The interior of the system has become unusually hot. Check whether the system is being used in a hot location or whether the vents are blocked. Stop using the system and leave it unused until it cools down. Continuing to use the system in the above condition will cause it to stop functioning.

  • The temperature inside the system has risen too high. Check whether the system is being used in a hot location or whether the vents are blocked. Touch the system's power button to stop the flashing, and then leave the system unused until it cools down. After it cools down, turn on the system again.
  • Feb 21, 2008 | Video Game Consoles & Games

    1 Answer

    My ps seems to have crashed!! it will only turn on momentarily,the light goes blue for a second, flashes orange?? then turns off!! the red light flashes till i touch the power on sensor,beeps then goes...

    Hi tomtoremar,

    Are you seeing any flashing red/yellow lights?

    If so this is the red light error and you will find that is why the system will not turn on.

    Why Does It Happen?

    The GPU and the CPU are the 2 main chips in the system and they deal with all of the number crunching however they can get very hot and if they lose connection the system will either freeze up or turn off and give you the red flashing light.

    How To Fix?

    The key is stopping the heat build up and you can either send it in and they will fix it for you.

    Bear in mind that for the PS3 red flashing light error you will be waiting for about 4 weeks and it will also cost you $150 for the repair bill!

    Other Ways To Fix?

    You can also use a good PS3 Repair Guide to fix it and this will show you how to stop the heat build up with a few household items.

    Just make sure that you get a good guide there are some good ones out there!

    Click Here For A Complete Review Of All Available PS3 Repair Guides.

    Hope this helps and any questions let me know?

    Mar 27, 2011 | Sony Playstation 3 (PS3) Console

    2 Answers

    I heard small pop then lost power while watching my lg 50pg20. No red or blue lights on the power switch. What could be wrong?

    you are describing a power supply defect. IT may be as simple as the main fuse. I believe the one in this set is a 6.5 amp located on the ps board right by cord connection. IF after replacing the fuse opens a second time you will need to replace the power board.
    p[lease leave feedback

    Feb 20, 2011 | LG 50PG20 50 in. Plasma HDTV

    1 Answer

    What is the American trailer wiring chart? What colour is left turn, what colour right turn, what colour is earth etc,etc?

    Typical... green is right turn and stop, yellow is left turn and stop, brown is running lights, and white is ground. Blue is typical trailer brakes, black is aux power and orange or red optional for back up lights or accessory.

    Dec 12, 2010 | Chevron Cars CC Boat 'N Trailer

    1 Answer

    How can I wire fluorescent tube light.There's 2 cables incoming through the wall.One has red,black and green/yellow.Other has red and black only.I've tried connecting both reds from the incoming cables to...

    if you have 1 switch ! take the cabel wiv the yellow red black an green conect green to E earth , conect the to reds together that will feed the switch connect the black to the nutral on the light fiting and tape up the yellow not needed !,then take the cabel wiv only red and black , the red is connected to the other red as explaind above ,then the black is the return from the switch therfor connect it to the live tuminal on the light fiting MAKE SURE U TURN IT OFF AT THE FUSE BORD FIRST PLEASE!!!!!!!!!!!

    Sep 29, 2009 | Hydrofarm Hydrorfarm Flco200d Fluorescent...

    2 Answers


    It might be your lamp is dead.Remove your lamp and check it. If you don't know how to remove this ask technician... Or maybe your button switch is not working properly.

    Jul 24, 2009 | PreSonus INSPIRE 1394 External Sound...

    1 Answer

    Inoperative LCD TV

    Welcome to Fixya! My Name is Travis! I have heard this Problem Before on Another Model. Turns out it was the Power Switch in that case. Yours has the Exact same Symptoms. Get that Checked and let me Know so we can go Further or if that is it.

    Jan 02, 2009 | Televison & Video

    6 Answers

    Supertooth one user manual

    Charge your Supertooth one via the car charger or by attaching a usb/mini usb cable to your computer usb port. Need to charge for 4-10 hrs. Indicator light glows red (needs charging), orange (charging) or green (charged)
    Power on: Press green button for 1 second. Indicator light blinks blue. A beep will be heard
    Power off: Press green button for 1 second. Indicator light turns red. A beep will be heard

    To pair with your mobile phone:
    1. Press green button on Supertooth for 5 secs until indicator light blinks red/blue 2. Access bluetooth menu on your phone. Turn bluetooth on. Execute a bluetooth search. 3. Select ST ONE from list 4. When phone requests password enter 0000 and press OK 5. The handsfree kit is now ready for use 6. Clip Supertooth on sun visor of your car so that the microphone and control buttons are directed towards you. 
    To make a call: Dial number on phone. Supertooth will automatically connect. Indicator light is steady blue during call
    To end a call: Press red button for 1 second
    To answer a call: Press green button for 1 second. The bluetooth indicator will turn a steady blue.
    To increase/decrease volume. Press volume buttons repeatedly up or down. They are situated between red and green buttons.
    Hope this helps.

    Nov 22, 2008 | Cell Phones

    2 Answers

    Creative Inspire 5.1 5200 Remote Wiring

    Hi glopher

    pin 1 (starting from far left when LED is facing up) = green
    pin 2 = light blue/lime blue
    pin 3 = black
    pin 4 = yellow
    pin 5 = pink
    pin 6 = red
    pin 7 = violet
    pin 8 (far right) = blue

    I hope this helps


    May 18, 2008 | Audio Players & Recorders

    Not finding what you are looking for?
    PreSonus INSPIRE 1394 External Sound System Logo

    Related Topics:

    410 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top PreSonus Computers & Internet Experts

    Greg Ulan

    Level 2 Expert

    191 Answers


    Level 3 Expert

    12962 Answers

    Tom Chichester

    Level 3 Expert

    45984 Answers

    Are you a PreSonus Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides