Question about 2wire (1000-400108-001) Router

1 Answer

Red broadband linklight

My 2wire modem broadband link light is red
it is directly connected to my xbox 360

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 178 Answers

I can help you

Posted on Feb 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Broadband link light is red.


make sure the PC's have DHCP turned OFF, in services. make sure all are on same network, all have password, Use the connect to internet wizard to make initial connection.
Please go to link below, download your manual, and follow instructions, step by step...
http://www.dsldepot.com/dslmodem.asp?modem=237

Jul 14, 2010 | 2wire HomePortal 1000HW DSL Modem and...

1 Answer

Xbox 360 wireless adapter wont connect to my 2wire


Have you tried removing all security protocols on the 2wire and trying to connect?

Good Luck!

Jesse

Jan 05, 2010 | 2wire HomePortal 1800HG Router...

1 Answer

I have a 2wire 2700hg-b modem/wireless router, my problem is i get lag while playing xbox 360 online, i get red bar to none , while my friend have all green bar,in the tv screen,also my laptop lose signal...


yeah a better modem would be the easiest thing to do because it's clear that the one you've got is either not transmtting properly or is just the unit you'vee got has a fault in it

Oct 15, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Hi - My 2wire 1701 gateway has steady green power light and steady local network light but the broadband link light is steady amber. My computer is receiving the WiFi signal but I cannot get any internet...


The broadband link light tells you the status of the connection between the modem and the broadband servers in your area. Green means everything is A-Ok while amber means your modem is not picking up a broadband signal.

Try turning the modem off and on and also make sure the cables are secure while you're at it. If the broadband light is still amber, the only thing you could do next is to call your internet service provider.

Oct 01, 2009 | 2wire Routers

1 Answer

How do I connect to XBox live w/ ATT 2Wire?


to connect your xbox live wireless to 2wire gateway router you need to go to your xbox menu and click on settings then click A on joystick.Go to network settings then select ip address configure automatic ip. DNS should also be automatic. Under advance tab you'll see wireless you need to click connect.if you are prompt to wype encryption its the 10 digit number enclosed in a bracket on the buttom of 2wire router go to

Aug 19, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Red Broadband Link


log into the modem and unchk the box for wireless "b" enhancement. should stop disconnecting wirelessly also check for interference.

Jul 10, 2009 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Broadband link has a red light


You have an outside connection issue. If the broadband link is red you are not receiving the internet service correctly from your provider. Need to call your cable/dsl provider and let them perform an over the phone check to make sure all is correct.

Hope this helps
TankMurdock

Apr 12, 2009 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Will it work


hello!

yes, the router will work with your pc and xbox 360.

You have to set the internet connection first between you modem, router and pc before you configure the xbox 360. try this and see if it will work with your network
you may try this and see if this help solve your problem

to set up your modem and router:

Step 1: Shutdown the computer.
Step 2: Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and test the Internet connection.

to set up your xbox 360:

Step 1: Power down the Xbox and connect a regular straight thru Ethernet cable from one of the numbered ports on the router and plug the other end of the cable into the Xbox™’s Ethernet port.
Step 2: Power on the Xbox without a CD in the tray and the Xbox Dashboard should appear.
Step 3: Select Settings and press A on the controller.
Step 4: When the Xbox screen appears, select Network Settings and press A on the controller.
Step 5: When the Network Settings screen appears, select IP Addresses and press A.
Step 6: Under Configuration, select Automatic and press A on the controller. Take note that the IP Address being shown will be the Xbox’s IP Address. Press B to return to the previous screen.
Step 7: When the Network Settings screen appears, select DNS Servers and press A.
Step 8: Under Configuration, select Automatic and press A on the controller to save the changes. Press B to return to the previous screen.
Step 9: When the Network Settings screen appears, select PPPoE Settings and press A.
Step 10: Under Configuration, select Off and press A on the controller to save the changes. Press B to return to the previous screen.
Step 11: Once the Network Settings appears, select Connect and press A to test the connection.

Apr 26, 2008 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Replaced my old 2wire 1800HG with a new one and can't connect it


hi!
first of all, let's try to make the broadband link light turn green. open any browser, go the modem's UI by typing gateway.2wire.net or homeportal/setup on the address bar, follow the onscreen instructions on running the system setup wizard. it should make the broadband link green now. for wireless connection, click on the airport icon, and select on the SSID or network name in the drop down menu. if ssid is not on the drop down menu, click on other. type the SSID in the network name field and wireless security is none. (SSID is the last 3 nos. of the SN)

Apr 22, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

2Wire 1701hg gateway- Broadband Access problem


hi! have you used this other identical 2wire modem before? if this other 2wire modem (is it the same 1701hg?) well you may need to configure the settings first. also 1000 series modems usually have 3 lights on it; power, broadband link, and local network. if these 3 lights are on, you may need to access the modem's user interface. assuming that all lights are green, on your computer directly attached to the 2wire, open up any browser, type in gateway.2wire.net. it will give you the network at a glance page. click on run system setup wizard, type in the system password. on the ppp authentication page, please check if it has your username & password (this is the one that you set up on your internet acct w/ your ISP), the next screen will establish a connection. (please tell me if you've got any error messages...)

Apr 06, 2008 | 2wire 2700HG-B Router (2700HGB)

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

Related Topics:

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Routers Experts

Bob S

Level 1 Expert

15 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a 2wire Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...