Question about Whirlpool Cabrio WTW6600SBT Top Load Washer
I have a whirlpool cabrio that i purchased about 1 yr ago and about 3 wks ago it gave me the F1 error code. It would only do it once at first then it would do it 3 times. Now it does not even run anymore. What deos the code mean, and how does it get fixed? Is there any way it can get fixed without having a tech come out an look at it?
"F1" is a primary control failure. This is an indication that the main machine control board has failed. The board is located on the right-hand side under the operator console. You can access it by removing the three screws in the back of the console and then lifting the console from the back towards the front of the washer. Make sure you UNPLUG the washer before opening the console. CAUTION: Use care when lifting the console off the cabinet. There are small interconnecting cables that connect the operator console to the control board that can be damaged if pulled too hard. The first thing you should do is perform a visual inspection to insure all the wires are connected and seated correctly. You can also try unplugging each connector one at a time and reseating them. Sometimes contacts can oxidize and not make good contact. If you attempt everything and the washer still does not run, you have a failed control board. If you wish to repair yourself, the board can be found at searspartsdirect.com. Just type in your model number (located under the lid along the rim of the wash tub opening) and you will find the part you need under the "Control Panel Parts" listing as item #1. The prices vary greatly between washer model versions, so make sure you have a COMPLETE model number when you type it in the search index. I hope this was helpful. Post back if you have any further questions.
Posted on Feb 18, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer
If you own a Whirlpool Cabrio and are experiencing an F1 error, you're unable to finish or start a load of clothes. When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor.
To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn't work, you will need to replace the control board. The only tools that you need to replace the control board is a Phillips screw driver and a 1/4" hex head driver. Be sure to unplug the machine from the electrical outlet before performing any repairs.
After unplugging your Whirlpool Cabrio washer, carefully pull the washer away from the wall (Watch your drain hose and the two inlet hoses.) Next unscrew the 3 screws located on the back of the Whirlpool Cabrio. Next, take a picture or make note of where each plug connects to the control board. Next, unplug each plug and the pressure tube. Lastly, unscrew the 1/4 screw then remove control board. Replace with new control board and reverse your steps to install. The new board will fix the Whirlpool Cabrio F1 error.
Dec 08, 2014 | Washing Machines
Jul 30, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Jul 25, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Mar 29, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Dec 07, 2009 | Cars & Trucks
Nov 25, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...
Apr 06, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...
Oct 26, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...
191 people viewed this question
Usually answered in minutes!