The Charging Circuit inside the Camera does not tolerate Overvoltage or wrong Polarity. The related Chip gets overheated and destroyed. You need an other Circuit Board from Camera with only optical Problem such as Error E45.
Please also try to upload new firmware: I doubt that it will solve the issue, but the alternative is a repair.
Connect the camera with the computer.
Turn the camera on.
Click onto the link and follow the instructions.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=8741/8743&product=EKN031110
77 views
Usually answered in minutes!
×