Question about Proview PL 566s 15" Flat Panel LCD Monitor

2 Answers

Proview 700P power problem

Have proview 700P lcd, just power up and screen shows some display and turn off in 2-3 seconds and nothing after that. possible cause? thanks

Posted by on

  • 3 more comments 
  • mmario Mar 29, 2008

    have proview model UK713 700P lcd, just power up and screen shows some display and turn off in 2-3 seconds and nothing after that. possible cause? thanks

  • narwal_sunil Oct 24, 2008

    700P goes to standby after 2-3 seconds of switching ON

  • narwal_sunil Oct 24, 2008

    my TFT Proview 700P goes to standby after 2-3 seconds of swiching ON

  • Anonymous May 01, 2009

    but mine doesnt make it to the home screen it just power on and off constantly

  • Anonymous Mar 18, 2014

    image only lasts a few seconds and screen fades

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Probably a bad inverter board.

Posted on Feb 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Proview Master
  • 848 Answers

Proview 700P power problem? This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:
860 AB0 170DTLAPH PI 170DTLA 200 000 170DTLA AH 860 AB0 170DTLAPH Power...

Posted on Jan 03, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i download driver for proview 700P?


you can download it from a website called driver guide. I have downloaded it and confirmed no viruses and to be the proper driver. Click here for the proview 700p driver
if you need further assistance please let me know, Thanks-Midwest-tek

Aug 28, 2010 | Proview PL913B 19" Flat Panel LCD Monitor

1 Answer

Proview Monitor Blank display after 3 seconds issue


First place to look will be the power supply section, look for bad caps (bulging tops or bottom seals), the post back what you see so we can guide you further for direction such as voltage checking, see example of failed monitors due to bead caps: http://s807.photobucket.com/home/budm/allalbums

Jan 28, 2010 | Xerox XG-91D 19" LCD Monitor

1 Answer

Proview 15" screen turns white


probably failure in the LCD controller IC in the lcd controller board. that no signal was sent out to the lcd driver ic thus you could only see white display. A replacement of LCD panel is the best solution. I suggest to bring it to an authorized service center. best regards

May 22, 2009 | Proview PL916S2 Monitor

2 Answers

How to use this Proview LCD Monitor 17" 700P AS A TV Screen


No. The newer LCDs can do both. But they are a TV to start with the option to hook up a Desktop.

Feb 08, 2009 | Proview PL713S 17" Flat Panel LCD Monitor

2 Answers

Green led light flashing on 700p proview flat panel and no picture


I have a similar problem.
Switching the screen off (front panel button) and on again after waiting a few seconds fixes it.
This is a recent problem, so I'm expecting it to get worse and worse until one day!!!!!!

Oct 03, 2008 | Hanns.G Corporation JW-199DPB 19" LCD...

2 Answers

Dead Proview 700p monitor


my monitor samston 17`` have a problem with screen ten minute after on it`s become on / off screen ( it`s black, it`s white ) when it`s happen the wording can read, when it`s on.

Jun 25, 2008 | Computer Monitors

3 Answers

LCD display Proview


If the screen is pinkish chances are the panel is defective.Should follow-up with Company Proview and do some correspondence.
Samir

May 23, 2008 | Proview PL926WBi 19" LCD Monitor

7 Answers

Need help: ProView 700P Silver LCD Monitor


You do NOT need a driver. Your monitor is broken. The high voltage power supply that provides power to light the CCFL cold cathode fluorescent lights is broken. The most common problem is that the 470uF 25V capacitors on the power supply circuit board are bad. Bad Caps have a swollen and sometimes leaky top. There are 6 capacitors that cost about 50 cents apiece from www.partsexpress.com . Buy high temperature replacement capacitors rated at 105C. If you can't de-solder and resolder have some 14 year old kid do it for you.

Feb 26, 2008 | Computer Monitors

3 Answers

Proview 700p problem


DISPLAY IS GOING OUT SIMPLY GET NEW MONITOR

Jan 16, 2008 | Proview PL 566s 15" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PL 566s 15" Flat Panel LCD Monitor Logo

Related Topics:

1,048 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computer Monitors Experts

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

13576 Answers

Terry Allen
Terry Allen

Level 3 Expert

680 Answers

Are you a Proview Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...