Question about X2Gen MG19MY 19" LCD Monitor

1 Answer

Manual I typed in x2gen manual in my search bar....but was told nothing was available. I am SO bummed about this. Marilyn

Posted by on

  • 1 more comment 
  • Marilyn
    Marilyn Feb 10, 2008

    No...it is as if it is in front of everything. I can't put my cursor on it...can't use the arrow keys...nothing. In fact, it just changed the contrast all by itself. I JUST now got it to adjust it to where I could see.



    Marilyn

  • Marilyn
    Marilyn Feb 10, 2008

    Yes you did! I appreciate all your help! I rated you helpful! Have a great day. BTW...we found the manual. It didn't help. lol I had FINALLY figured out how to use the menu keys....but think the problem is just an internal glitch with the monitor.



    Giggles and hugs,

    Marilyn

  • desertrat54 Mar 06, 2008

    Can you tell me exactly how you figured it out? I need to adjust my display, and I can't for the life of me get anything to work!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers
  • 5 more comments 
  • nick helpap
    nick helpap Feb 09, 2008

    u all ready tryed puching thema ll right still stuck on screen

  • nick helpap
    nick helpap Feb 09, 2008

    on menu can u move arow ove rto exit hit enter ?

  • nick helpap
    nick helpap Feb 09, 2008

    left right arrorow keys go leftto u see exit then hit ok or enter

  • nick helpap
    nick helpap Feb 10, 2008

    keep working the menus to u see exit ok

  • nick helpap
    nick helpap Feb 10, 2008

    ta bad screen i seen all over new egg and online very low ratings bext is benq and samsung acer sreens ok

  • nick helpap
    nick helpap Feb 10, 2008

    hey rate me helpful ok cuse i tryed hard

  • nick helpap
    nick helpap Feb 10, 2008

    ya what im thinking also ok thx nick

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost manual


Hello,

I suggest you follow the link below to search for the manual of your device, the link contain virtually all the manuals of all device.

manualsonline.com

Type the above link on your web browser to search and download the manual of your device.

Take care.

Jun 28, 2010 | X2Gen MG19VT 19" LCD Monitor

1 Answer

Where can I find a copy of the manual for the X2Gen MG19VT


google it.

In case you want to avail a free technical support,
just get in touch with one of the techbuddies they provide free

technical support, you can find them on http://tinyurl.com/n29l7c

Jun 18, 2009 | X2Gen MG19VT 19" LCD Monitor

1 Answer

Black screen. Power light binking from dim to bright


I have exact same problem but mine happened to 2 of my x2gen monitors at the same time,really strange.
One was purchased 01/07 and the second 04/07
Took my PC in, no problems
Took one of the x2gen in,was told monitor is bad
How could both monitors go bad at the same time???????

Mar 20, 2009 | X2Gen MW22U Monitor

1 Answer

Moniter very lightly flashing


Problem was not solved. I am returning to Samsung. Thanks.

Jan 05, 2009 | X2Gen MG19MY 19" LCD Monitor

1 Answer

X2Gen MW19U: Start "Auto Adjusting"


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC involved. (Also make sure you are using the proper type of cable - analog/digital - for the connection.) Also suggest switching out cables to eliminate that. Further, you could try to see if the monitor functions properly when attached to another machine. If the machine is not functional and another is, that will confirm that the issue is hardware-based.
Unfortunately, X2Gen has declared bankruptcy (see http://x2gen.com/) and there is no way to go back to the manufacturer for either support or warranty service. If you are still within a given time frame with either the retailer, or perhaps through a credit card company, this would be your best recourse. Here is the link to the form via which you could file a bankruptcy claim: http://www.x2gen.com/files/Claim.pdf. Hope this may help, if you can't get reimbursed through some other means.
My experience with this type of issue is that the hardware has gone bad. Particularly with the nature of your problem, it seems that it is not a minor problem, and does not appear to involve drivers or other software-type fixes. If you could get a professional tech to repair it, the cost would most likely be more than replacement of the monitor. Sorry for the bad news, but I don't think there is a better solution.

If the monitor continues to behave in the same manner, I think that is absolute confirmation that you have a "nonnegotiable" hardware issue. If not - in other words, if you see something different with switch of connections/machines, there could be a graphics card/driver or other issue that we could work on further.

Please post back if you need additional assistance, or this does not answer all your questions. Otherwise, thanks for using and rating FixYa!

May 23, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

X2Gen Monitor speakers not working


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC involved. (Also make sure you are using the proper type of cable - analog/digital - for the connection.) Also suggest switching out cables to eliminate that. Further, you could try to see if the monitor functions properly when attached to another machine. If the machine is not functional and another is, that will confirm that the issue is hardware-based.
Unfortunately, X2Gen has declared bankruptcy (see http://x2gen.com/) and there is no way to go back to the manufacturer for either support or warranty service. If you are still within a given time frame with either the retailer, or perhaps through a credit card company, this would be your best recourse. Here is the link to the form via which you could file a bankruptcy claim: http://www.x2gen.com/files/Claim.pdf. Hope this may help, if you can't get reimbursed through some other means.
My experience with this type of issue is that the hardware has gone bad. Particularly with the nature of your problem, it seems that it is not a minor problem, and does not appear to involve drivers or other software-type fixes. If you could get a professional tech to repair it, the cost would most likely be more than replacement of the monitor. Sorry for the bad news, but I don't think there is a better solution.

If the monitor continues to behave in the same manner, I think that is absolute confirmation that you have a "nonnegotiable" hardware issue. If not - in other words, if you see something different with switch of connections/machines, there could be a graphics card/driver or other issue that we could work on further.

Please post back if you need additional assistance, or this does not answer all your questions. Otherwise, thanks for using and rating FixYa!

May 03, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

X2Gen 19 inch LCD Monitor problem


Its the problem of the main display board. Not the SMPS. There will be another board inside. You have to replace the board or If some body may fix if you have spare parts of the board.

Apr 11, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

Menu and Volume Icons displays quite frequently


try unpluging it then back in aftr 10 min k

Feb 09, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

Brightness controls


Unfortunately, the x2gen company has declared bankruptcy and gone out of business due to legal trouble (x2gen.com). Manuals are no longer available online.

Unless you can find someone who can read the menus for you, or has an old manual laying around, I can pose a couple alternative, albeit tedious, solutions.

Using http://babelfish.altavista.com/ you can translate your menu... that is, you can type "BRIGHTNESS" in English, and request the Japanese translation. Locate the text in the menu that matches the translation. Tedious, yes, but it would work. To use this for non-arabic based character sets, you will need to install a Japanese font on your system, otherwise the text will return as "?????" question marks (in place of each Japanese character).

Another alternative would be to take a photograph of your menu screen and submit it to a forum to have an online user do the translation for you...

Just some ideas - hopefully you can make some progress...

Jan 25, 2008 | X2Gen MG15VT 15" LCD Monitor

Not finding what you are looking for?
X2Gen MG19MY 19" LCD Monitor Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top X2Gen Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

William Alequin

Level 3 Expert

855 Answers

Ed Mac

Level 3 Expert

717 Answers

Are you a X2Gen Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...