Question about Samsung LTP326WX/XAA 32 in. HD-Ready LCD Television

1 Answer

Samsung LTP326w when using HDMI input the screen shows the video briefly then the screen goes to a blank green screen

Posted by on

1 Answer

After few years of service with different TV providers I have problem with my TV. Last night my Samsung LTP326W just did the same think on HDMI connector and no mater what you do it will not turn HDMI video... it's connected to Verizon/Motorola DVR I called Verizon and they promptly replace DVR and HDMI cable but it didn't help at all, also sometimes when you power on/off I get message: The HD Content Protection of your display has been compromised Please use the YPBPR outputs for your HD connection...

When I switch to component cable it works just fine.

Posted on Apr 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV screen is blank but the program is still playing


Check the cables, makes sure all connections are still snug. If your using HDMI, try swapping it out for one you know works. There are a lot of lemons out there.

Feb 24, 2016 | Flat Panel Televisions

2 Answers

Monitor goes black - green light stays on


My screen is black, why do I not have a picture?
Answer Antenna is not hooked up to television.
  • Make sure that the antenna cable is correctly connected to the television. If it doesn't work there appears to be no signal.
Problem is caused by television broadcast
  1. Push 'INFO' button.
  2. If the screen shows channel number (1, 2, 3, etc) try another channel. Not all channels broadcast at all times.
  3. You may have a signal problem. Contact cable provider or local broadcaster regarding the specific channel.
Television is in EXT or SIDE mode, and there is no external source provided, so screen mute (black screen) is activated.
  1. Push NEXT SOURCE button on the remote.
  2. On the screen appears all sorces.
  3. Press the UP button to switch to the TV mode.
If you are using an accessory device (DVD, DVR, or VCR), be sure the device is on and running.
Blank screen when connecting to the accessory (DVD, STB, PC) device via HDMI to HDMI.

Answer
  • Make sure the cable is well connected .
  • To check which connection is selected, Press the i+ button on the remote control.
  1. When you see Blue mute / blank screen and the i+ display does not indicate any video resolution indication then there is no valid signal detected.
    • Make sure the HDMI output of the accessory is valid by changing the video output resolution to a resolution which the TV can handle.
  2. When you see a blank screen and the i+ display shows a video resolution indication then the connection is correct.
    • The blank screen is caused by the accessory device and not by the TV.
    • To detect and remedy the problem caused by the accessory device, check the instruction manual of this device.
  3. If the problem remains : reselect the HDMI external source input by changing to the other HDMI input and back to the connected HDMI :
    1. Press AV on the remote
    2. Press up and then ok
    3. Press AV again
    4. Press down and ok
    5. The compatibility check process between TV and accessory device will start over again.
  4. Reset (switch off and back on) the TV and also reset the accessory device.

Mar 05, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

I think my htmi port is faulty i have tried 2 different leads n in both ports i can see whats plugged in briefly but then the screen goes black n red briefly n goes blue n stays blue


It may be necessary to change the input selection via the TV's menu system from its current setting to HDMI.

A blue screen is often used to indicate 'no signal.'

Mar 14, 2015 | Flat Panel Televisions

1 Answer

Connecting my new samsung blu-ray player (bd-fm57c) to my toshiba theaterview tv.


I don't think that cord will work. HDMI carries video and audio signals, you might get video but probably no sound. You might as well try anyway though so here goes... The red green and blue plugs are your video and the other red plug and the white plug is for stereo sound. The yellow plug is just a lower quality video plug. So plug in the red blue and green plugs into the component video inputs on the TV then the red and white plugs into the audio inputs. DON'T plug in the yellow plug. If this doesn't work go to your local home theater store and ask for a receiver or switcher that will downscale high def HDMI to component video and stereo audio. You can probably pick up a cheap one for around $100. Good luck!

Mar 29, 2014 | Toshiba 50 Inch Big Screen Flat Tv Theater...

1 Answer

My hannspree tv screen goes black blank


If the picture shows a picture briefly upon power up then goes off after a few seconds, you have a back light fault. It could have a problem in the 24vdc circuit, failing back light inverter board, or a blown CCFL lamp.

Dec 05, 2012 | Flat Panel Televisions

2 Answers

I have a Sharp Aquos LCD TV Model LC-32BX6M , when I try to connect a new generation Android TV Box HDMI Out to TV's HDMI input the Android Logo appears and after sometime the screen goes blank t


im not sure but could it be a comparability issue with the device and the wake up signal from the device to the tv? android systems use a Linux based file system, so the problem may be in the tv's input settings. hdmi input from the device to the tv. and then go to tv input mode and see if putting the device in another hdmi port doesn't work.

Oct 15, 2012 | Sharp Aquos Flat Panel Televisions

2 Answers

The coax input on my tv is broken off how can I connect the cable to it other than the red white and yellow cords which don't have a good connection either I have my dvd player hooked up to hdmi is there a...


the simple answer is no.
but if you have basic cable (coax) you could connect it to a vcr, tune the channels with the vcr-
connect the vcr to the TV with composite video (yellow, red/white)

Apr 13, 2011 | Samsung Flat Panel Televisions

1 Answer

Screen goes blank


This set has a factory upgrade for HDMI problems like yours and it also fixes another problem for intermitent sound in the HDMI mode. This model is still under warranty. Call: 1-800-SAMSUNG To find a local servicer in your area.

Jul 02, 2007 | Samsung LN-T4665F 46 in. LCD Television

Not finding what you are looking for?
Samsung LTP326WX/XAA 32 in. HD-Ready LCD Television Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Steve McIntosh

Level 1 Expert

11 Answers

brian more

Level 1 Expert

28 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...