Question about Cell Phones

1 Answer

Sanyo m1 screen failure

My sanyo my is nearly a year old, last night when I got off the phone, the screen was plain bright white only.

the phone still makes and receives calls but thats all I can do with it now ; ; please help ^^

Posted by on

  • 2 more comments 
  • StubbieKC Apr 02, 2008

    Exact same issue. Phone will be a year old this week. I went out to take a picture with it earlier today and the inside screen was Grey/White and the outside small LCD lights black. I can make and take calls just fine. Took it to the Sprint Store this afternoon "Bad Device" is what they tell me. I can exchange for $55 there, or send it off to Sanyo for repair for free. Sanyo will be getting it back.

  • celowe May 08, 2008

    Same problem, can get it to work if I place phone in fridge for a couple of minutes. After warming again screen goes white

  • nzwairua Jul 26, 2008

    I get the white screen most often on closing the phone. It's been in for repair for the same issue 4 times. On the third time it came back 'fixed' however it did not power up and had to be returned for repair (4th) before I even took possession.

  • zurab Nov 06, 2008

    Started in Nov 08. It used to be sporatic, and now its 90% of the time. Can't see the screen, who's calling, messaging. Kind of reminds you of a time before caller id.


1 Answer

Now in Nov 2008, I have the same problem. It used to be sporadic, but now 90% of the time.

Posted on Nov 06, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I find the pairing code

Well I know for sure the default pin for the M1 is indeed 0000. However I cannot tell you what the pin would be for your specific bluetooth dongle. If I where you I would try 0000, 1111, 2222 and so on

Feb 16, 2012 | Sanyo Cell Phones

1 Answer

I need to know the bluetooth pairing code for sanyo M1

Well I know for sure the default pin for the M1 is indeed 0000. However I cannot tell you what the pin would be for your specific bluetooth dongle. If I where you I would try 0000, 1111, 2222 and so on
  • As with all Bluetooth headsets, the H700 needs to be paired with the device before it can be used, which is done in pairing mode. In pairing mode, the H700 makes a transmission so that Bluetooth-enabled devices can pick up the device and connect to the headset. Once connected, no other device can connect with the Bluetooth headset. To enter pairing mode on the H700, open the headset boom located near the microphone. After a few seconds the indicator light will turn purple. Once purple, the H700 is in pairing mode.
Searching for the Device With the M1
  • Once the H700 is in pairing mode, have the M1 search for Bluetooth devices. To do this, press "MENU/OK" and choose "Tools," "Bluetooth," "Add New" and "Search." A list of Bluetooth devices will show up on the screen. Highlight "Motorola H700" and press "MENU/OK." Choose "Add to Trusted," enter "0000" and press "MENU/OK." The devices are now connected and ready to be tested.
Testing the Devices
  • Once the devices are connected, test that both the phone and the headset are working properly together. First, place the headset in your ear. Dial a number on the phone and press "Send." If you can hear ringing, the devices are connected properly and ready for use.
    If the connection was not successful, repeat the previous steps and try again. Make sure the indicator light is glowing purple and is steady. If you have connected the headset to a previous device, make sure that device is turned off so as not to interfere with the connection procedure. Once the other device is off, close and reopen the boom to enter pairing mode.

Feb 16, 2012 | Sanyo Cell Phones

1 Answer

I put my iphone 3g on to charge last night and when i woke up this morning screens all faint i can barely make out the icons.. ive been into and turned the brightness right up and no change.. please help

Sounds Like.
Water Damage. D:
My Old I Phone Did That .
Look And See If Anything Got Spilt Around It .
Try To Connect IT To Itunes.
And See If It Says There Is An Issue Of Not,
Try The Store.

Jul 31, 2011 | Apple iPhone 3G

1 Answer

I have the blackberry 8520 and last night it lock and i got a message saying memory cleaning. Now for the last 12 hour all i have is a white screen with a timer, the phone is completely...

Try entering any password in your blackberry until you reach 10 times password failure, it should be make your blackberry curve 8520 unlocked also erased all your previous data. After your blackberry unlocked, setup new password for your phone. If this solution not working the only option is reflash your blackberry phone. Good luck!

Mar 09, 2011 | RIM BlackBerry Curve 8520 Smartphone

1 Answer

I was using my phone and suddenly my screen turns plain white.

The white screen is a very common thing with LG phones. It is not caused by anything you did, it's just a faulty phone, and unfortunately there's nothing you can do to fix the problem. If your phone is under a year old, it is still covered under warranty and can be replaced through a local Verizon Wireless Retail Store, or if you call customer service, they will ship you out a new one (free of charge, of course) 1-800-922-0204.

Mar 03, 2011 | LG CU400 Cellular Phone

1 Answer

How do i convert a sprint sanyo m1 to verizon wireless

it can be unlocked by calling your carrier and they will give you the infomation unlock code as long as the account is current and not delienquent if canceled

Feb 22, 2010 | Sanyo M1 Cellular Phone

1 Answer

The phone never loads and a white screen appears

Remove the battery from the phone for 10 seconds then re-insert the battery and battery cover and power the phone back on. If the phone is still having problems and you have not had it for more than a year brand new from your phone carrier then it would be covered under a 1 year manufacturer warranty for phone hardware and software malfunction. If the phone has been exposed to extreme moisture or water then the warranty would not cover this problem and if this were the case then there would be a bright red or pink sticker in the phone or on the battery when you remove the battery from the phone. It sounds as if your phone would have to be sent in for repair and to have that done, just take the phone to your wireless carrier and ask them what your options are for repair or replacement.

Sep 29, 2009 | Motorola Mobility i580 Cellular Phone

1 Answer

Can I Unlock the Sanyo M1 from Sprint?

If you can get a CS rep to tell you the MSL number yes. Won't help in all likelihood though since CDMA phones are tied to the provider they were bought from via the ESN.

Mar 22, 2009 | Sanyo M1 Cellular Phone

8 Answers

Blank or White screen on new Motorola Krzr k1 cell phone

the white screen is because the 'flex' is broken. u need to change it. the 'flex' is a part that connects the upper part ( screen) and the lower part (keypad) of the cellphone. the flex is a common problem with flipflop phones. i dont know if u can get it in your country, but we have lots here. it costs around $14-15 including labor.

i was able to solve the white screen problem, but one of the 2 problems w this cell still exists. Whenever i close the flipflop, "memory card removed' appears, and it keeps blinking. Or when i charge my cell, this msg also appears. this also drains my batt. If i reinsert my memory card, it solves the problem, but whenver i charge my cell, it appears again. So its kind of a hassle to always open the back of the cell to reinsert the memory card, so what i do is , i never close the flipflop. Anyone has the same problem?

Jul 17, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

66563 Answers

William Alequin

Level 3 Expert

856 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides