Question about DCS WO-130 Stainless Steel Electric Single Oven

2 Answers

DCS wall oven F7 ERROR

WO-127SS

Posted by on

  • 3 more comments 
  • symar Mar 14, 2008

    I too am getting the F7 message. I got rid of it by opening my door, lightly jiggling the door lock and restarted the cleaning cycle. As of right now it is working.

  • mikemannix Apr 13, 2008

    My DCS oven is three years old. Started beeping with the F7 code showing in blue on the LED readout. I had to flip the breaker switch to make it stop. Pushing the cancel button makes it go away for a minute then it starts again. What is going on and how can I fix it? Can anyone help??? 

  • troach Sep 27, 2008

    We were originally having the F7 error and now the control panel does not work at all...please help. Please also advise where I can order any parts that are needed. Thanks!!!

  • Anonymous Dec 01, 2008

    F7 Pain in the you know where

  • nadiaggg May 11, 2010

    I am having the same problem - how do you fix this?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I TRIED SOLUTION FROM SYMAR DATED MAR 14, 08 IT WORKED FOR NOW. I HOPE IT WILL CONTINUE WORK UNTIL SERVICING...COME MORNING.

Posted on Jan 07, 2009

Oven display a blinking F-7 and Beep, how can I fix that?

Posted on Feb 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven beeps and display shows F7


Error F7 means that the keypad is shorted or stuck and to resolve this issue you'll have to replace the Electronic Range control (ERC).

The code can be caused by a faulty keypad or a stuck keypad which may mean relay is turned on. Determine if problem is with the Key Panel or Control by:
a.- Pushing CLEAR/OFF pad.
b.- Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if code come on again, the problem is in the Control. Replace control to solve it. If code does not come on, problem is with the Key Panel
.

Hope helps.

Jul 07, 2011 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

Need a service manual for wo-127ss DCS single wall oven. need to replace the control board because my display light went out. How do I take it apart?


you can call dcs, they will be happy to send you a manual,
but mostly, this should be pretty simple, three small black phillips heads hold tthe console down, the are above the door when closed
from there the panel should tilt forward and off
becareful they dont leave much room. or very long wires

Oct 13, 2009 | DCS (WOTD-227) Double Oven

2 Answers

F7 error message in DCS 27in double electric oven


hello. here is the customer service department info at DCS. Since this unis is new, Irecommend that you work directly with them so as to avoid voiding the warranty

http://www.dcsranges.com/contact.html

Jun 22, 2009 | DCS (WOTD-227) Double Oven

1 Answer

NEED HELP ON DCS WO-230 DOUBLE OVEN


there are 2 screws at the top outside and 2 or 3 on the bottom of the display panel. remove those and the panel should lift off the mount. remove the ribbon cable and 4 screws for the display and replace.

Oct 05, 2008 | DCS WO-230 Electric Double Oven

2 Answers

Display on our dcs oven is beginning to fade. can i fix it?


Hello just repaired my DCS wall oven. LCD screen is no good. part # lcd only is 211708. cost is $85.00 dollars with shipping. Took me twenty minutes to install. just need one philips head screw driver.Just call DCS Fisher@Paykel 1-888-281-5698 new Zealand.

Oct 03, 2008 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

DCS over F7 error beeping


KEYPAD BUTTONS ARE REMAINING CLOSED FOR MORE THAN 32 SECONDS. REPLACE KEY PAD,DUE TO STERCHED PANEL MEMBRANE

Jul 25, 2008 | DCS WO-130 Stainless Steel Electric Single...

5 Answers

DCS elect wall oven LCD display


Had the same display issue with my DCS WOS-230. The display was fading and made it very hard to read clock and temp setting. Called DCS/Fisher Paykal and was told I need the Control system kit for $335.00 to fix the issue. After reading the input on this issue on this site I pushed them to sell me just the DCS EOC 211696 double display module 100-01095-00. Install took 10 minutes and everything works great. Thanks all for laying the groundwork as DCS will really push hard to sell you the more expensive kit that you do not need.

Jul 17, 2008 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

DCS Single Wall Oven Model WO-130-SS


Order part #211708 from 1-888-281-5698 DCS Fisher@Paykel new Zealand. Only need philips head screw driver and twenty minutes. This part is a upgrade for lcd only. old part was a three part system, but no need for three parts only lcd screen.

Jul 07, 2008 | DCS WO-130 Stainless Steel Electric Single...

Not finding what you are looking for?
DCS WO-130 Stainless Steel Electric Single Oven Logo

Related Topics:

1,078 people viewed this question

Ask a Question

Usually answered in minutes!

Top DCS Ovens Experts

Carmen Mikulic

Level 2 Expert

409 Answers

deriuduo

Level 1 Expert

26 Answers

ray gallant

Level 3 Expert

36038 Answers

Are you a DCS Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...