- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The codes are to program the universal remote control to communicate with the Sony VCR. Try programming the universal remote using one of these: 60000 60032 60033 60035
The acceptance of the cassettes may not be related to the use of a universal remote control. If the URC doesn't have the "equivalent" functionality of the VCR's original remote control, you may not be able to use the URC to perform the functions of the original remote control.
You should have no trouble getting a universal remote to work the basic functions: power, tape motion, etc. But you may have problems with advanced functions such as programming or accessing any special features the model may have. Often only the original remote has all the buttons needed. Universal remotes don't usually give complete control. If you're just looking to play tapes, you should be good with any basic universal remote that.
look for a universal remote with it should be a programing guide that will give you a list of codes for a sanyo brand vcr enter them per the directions till one works much easier and cheeper than looking for the original
Following the instructions I have been able to program a Philips SRU4105WM/17 universal remote using the first Mitsubishi code from the code list. However, I had to have the universal remote "learn" the vcr/tv button function (I assigned it to the Exit button). Good thing I still have the original Mitsubishi remote:-) I haven't tried having the universal remote learn all the functions, such as Cancel, Counter Reset, Audio Function, Video Function etc. I could see if I'm able to program those, if you'd like. LMK if you have any other questions.
If you have Dish Network and I suspect if you have Direct TV or a cable providers, you can use your remote for that service provider to find your VCR code. For the Dish you can look in the user's guide on pages 9 and 19 to see how to do a "Device Code Scan" and "Check Device Code". To Scan: #1: Turn on the device you wish to scan for a code, #2 Press and hold down the button on your Dish remote for that device until all the buttons light up and the specific device button is flashing, #3 Press the blank power button, #4 press the up or down button until until your VCR tuns off, #5 Press the POUND ( # ) key to store the code number and #6 Press the blank power key to turn the device back on. To Check the Device Code: #1 Press and hold down the device key until all buttons light up and the device button is flashing, next press the POUND ( # ) key TWICE ! The Mode button will flash to code number with a pause between each number, i.e. 5 flashes, pause 3 flaskes, pause one quick flash is 530. Write down this number and you are rady to go !
I assume you are wanting to use one remote box to control most/all of your equipment? Some remotes have that capability, others do not, as they run only the piece of equip they came with, or perhaps that branded equipment.
My suggestion, if you can't come up with instructions for your current remote, is to look into purchasing a universal remote which specifically lists your models of equipment you wish to run. The better ones may also have the capability of doing advanced programming (timed record for example) of your VCR.
Look here for codes here- didn't realize such a site existed 'til now: http://www.remotecentral.com/features/remotes.htm