- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Owner's Manual, page 97: (1) With the ignition on and radio off, pres SET. The SET indicator will appear on the digital screen for five seconds. (2) During that time, you can set the clock. If your audio system does not have a CD player, press SEEK v to set hour and SEEK ^ to set minute. If your system has a CD player, pres SCAN to set the hour. Then press <SEEK to decrease minutes or SEEK> to increase minutes.
Setting Time 1 Press TITLE repeatedly until the time is displayed. For details, see “Displaying the Text” (page 13) 2 Press and hold TITLE for at least 2 seconds while the time is displayed. The time indication will blink. 3 Turn the Rotary encoder to adjust the hours while the time indication is blinking. 4 When the hour has been adjusted, press MODE. 5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing TITLE. • To synchronize the clock to another clock/watch or radio time announcement, press and hold MODE for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour. Listening to Radio 1 Press SOURCE/POWER until a radio frequency appears on the display. 2 Press BAND repeatedly until the desired radio band is displayed. F1 (FM1) F2 (FM2) AM F1 (FM1) 3 Press TUNE to select the tuning mode. DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously. Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. •You will need to start from set up or you will not be able to set the mins
press and hold clock button for atleast 3 seconds while the time is displayed until time blinks.rotate the mode knob until the hour is correct. press the mode button to adjust your minutes. when done press mode button again to set.
Yep, you'll see a Play/Pause button. Just press that until it says DX Seek (or Seek if you want to skip over stations that are slightly farther away). Then press your tune buttons! If it still doesn't work while in DX or DX Seek mode, then hold the tune button for a second. It'll beep and start scanning to the next one!