Question about KLH R7000 Receiver

2 Answers

KLH R7000 "popping"

Lately when i turn on my R7000, sat dish and tv, everything works fine, but after a few minutes, the speakers will "pop" and no more audio. I have checked all connections, they seem ok.
what's up?

Posted by on

  • substation Feb 13, 2008

    Thank You,

    I think I need to use a digital audio optical cable, which I will try soon.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I had a similar problem with popping and then no audio for an extended period of time. I found the solution on another site, http://dexsoft.com/blog/?p=15

Apparently the solder joints are weak, and just a the blog described when I opened up the receiver I saw the same scorch marks from overheating. Just as the blog described, I added solder to each of the joints in the photo and have had no problem ever since.

I am no solder expert, this is my 2nd time, but all I did is build up each of the joints and I have been listening to music, playing movies in surround sound with no problems for the last 2 weeks.

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers

What input u on were pops dish ? cheak audio out settings on dish box to pcm or uusing digital cable then use dobly digital

Posted on Feb 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a KLH 700watt home theater reciever that wont stay on!!


Sounds like it is overheating. Try one or all of the following:

Remove anything that may be stored on top of it. Unblock the vents.

Connect speakers with a higher sensitivity rating.

Move it to an area where it has more airflow around it, ie; not in a closet or cabinet.

Disable any bass-boost and equalization, or tone controls.

Set any crossover settings for any subwoofer you may have connected, to a higher frequency.

Decrease your listening volume.

Dec 30, 2009 | KLH R7000 Receiver

1 Answer

KLH Receiver Shorting Out


See if you can spot a pattern to the failures. I suspect that it is heat related. In the time that the unit ran all day, I suspect that the volume level was lower. Am I correct? If so, then either there are poor solder connections which are being effected by heat or there is a part that is defective. Are there any other symptoms or does the unit just shut off? If you attempt to turn it on, will it play for a while? If you can solder, look for solder connections that look grainy or have rings and resolder them.

Keep us posted on your progress,

Dan

Feb 23, 2009 | KLH R7000 Receiver

1 Answer

Audio receiver!


When I watch movies, most of the talking is directed to the center speaker. During surround sound, this gives a more realistic environment, with voices coming from the source (center where your tv is) and ambeint noise coming from the left/right corners.

Get a small center speaker to solve your problem.

Jul 20, 2008 | KLH R7000 Receiver

1 Answer

Klh r7000 no sound


Like I wrote, I had a similar problem with popping and then no audio for an extended period of time. I found the solution on another site, http://dexsoft.com/blog/?p=15

Apparently the solder joints are weak, and just as the blog described when I opened up the receiver I saw the same scorch marks from overheating. Just as the blog described, I added solder to each of the joints in the photo and have had no problem ever since.

I am no solder expert, this is my 2nd time, but all I did is build up each of the joints and I have been listening to music, playing movies in surround sound with no problems, no popping for the last 2 weeks.

Jun 15, 2008 | KLH R7000 Receiver

1 Answer

KLH R7000 Component Video Problems


I have lost my remote and instruction book where? do is it worth it replace

Mar 07, 2008 | KLH R7000 Receiver

1 Answer

Poping in speakers


Same issue with my AVR-589...2-15 minutes after sound is playing (via TV or DVD). I checked all wires and speakers. Even reconfigured to audio only (analog) coming in, same issue. Put my old Denon receiver in and the problem disappears...possible overheating issue with this new unit?

Dec 22, 2007 | Denon AVR-3806 Receiver

1 Answer

Klh r7000 no sound


go to this site dexsoft.com/blog. Is under : KLH R7000 no audio repair. Problem solve

Oct 14, 2007 | KLH R3100 Receiver

1 Answer

Buzzing in KLH R7000


look on the component for details or in the schematic of the device if u can find a voltage requlator that matches the same specifications as in ur system then u will b happy till then u will need the manufacturer requlator good luck windman

Nov 27, 2005 | KLH R7000 Receiver

Not finding what you are looking for?
KLH R7000 Receiver Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top KLH Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a KLH Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...