I have already loaded the buffalo G-125 high speed router and have already got a wireless connection with a Netgear adapter. The problem is that I cannot seem to open the 192.168.11.1 webpage. So please if you could tell me how to do so. Also would like to secure my connection, so what is the way.
- Open the Router page by typin Defaul Gateway ip and entering respective username and password
-click on "wireless settings" under setup (left corner window)
-select security options as WPA-PSK
- it will prompt u to enter the passphares
-ENTER KEY (8 to 64 characters)
-AGAIN SCAN AND ENTER KEY AND CONNECT
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To configure router it depends on whih router you are using a broadband or a wireless.
Here I can so you how to setup routers in different ways.
Here I have defined 5 different router to setup it.That is given bellow.
How to configure linksys broadband router.
Connect and install your router according to the product manual.
Open your Web browser then check your product manual for the Web address you need to enter.
Enter the Web address, then enter the user name and password supplied in your manual.
Enter the required setup information. You'll need to call your Internet Service Provider (ISP) for this information if you don't have it already.
Choose the connection type you want from the drop-down menu labeled "WAN Connection Type." The connection type you need will depend on the information you receive from your ISP.
Click the "Apply" button to save your settings, then close the browser window.
Reset the power on your modem.
Restart your computer.
How to configure netgear wireless router.
Connect your high-speed modem to the Netgear wireless router with an Ethernet cable. Turn off and unplug your high-speed modem's power before connecting the device to your wireless router. Plug the Ethernet cable that was connected to your high-speed modem into the "Internet" port on the back of your Netgear wireless router. This port is located next to the wireless router's power port and is designated by a green color.
Connect your computer and the Netgear wireless router with an Ethernet cable. Shut down your computer before connecting it to your wireless router. Plug one end of the short, blue Ethernet cable that came with your Netgear wireless router into your computer's Ethernet jack. Plug the other end of the cable into a LAN port on the back of your wireless router. Your wireless router will have several numbered LAN ports, designated by a yellow color. It does not matter which LAN port you use.
Turn on each device in order. First, power up your high-speed modem, then wait at least 2 minutes. This allows it time to connect to your Internet Service Provider's (ISP) server. Make sure that your high-speed modem's status indicators show that it has successfully connected to your ISP's server. Next, plug the Netgear AC power adapter into the Netgear wireless router and a power outlet. The AC power adapter plugs into the back of the wireless router in a black-colored port labeled "Power." Wait at least 2 minutes for your wireless router to connect to your high-speed modem. You will know that it has successfully connected if all of the status lights on the front of the wireless router are on. Finally, turn on your computer.
Open your Web browser and connect to the wireless router's URL. In the address bar of your browser, type in the wireless router's address. The Netgear wireless router addresses are: http://www.routerlogin.net, http://www.routerlogin.com or http://192.168.1.1. You can use any one of these URLs. Press "Enter" on your keyboard once you have typed in the address.
Input the default user name and password. The default user name is "admin," and the default password is "password." The text boxes are case-sensitive, so it is important that you use lowercase letters.
Follow the Setup Wizard instructions. Once you log into the router, a Setup Wizard will load and ask if you want it to detect your Internet type. Click the "Yes" radio button, then click "Next." Once you have completed the wizard, configuration is complete, and you can access the Internet using the wireless router.
Configure wireless settings. If you have wireless devices that you want to connect to your Netgear wireless router, you must access your wireless settings. Log into the wireless router as described in Steps 4 and 5, then find and click the "Wireless Setting" link on the main menu. You can change the default SSID (wireless network name) from "NETGEAR" to a custom name, and you can change security settings such that a passcode is required to log onto your wireless network. When you finish changing your wireless settings, click "Apply." You must use this SSID and passcode to connect your wireless devices to your Netgear wireless router.
How to configure 2wire router.
Things You'll Need :
Connect your router to your computer using the Ethernet cable inserted into the appropriate ports. Launch your browser and type the following in the address bar:
Click the tab for "Home Network." In the right-hand frame, "Status at a Glance," click the button next to the "Wireless" option (in the Home Network section) and set to "Disable."
Click the "Wireless Settings" link in the top menu bar. Verify or type the name SSID, which is the Network Name (located on your router's label with the prefix, "2WIRExxx" where *** is the unique identifier). Locate your WEP encryption key on the label below the serial number.
Select the Wireless Channel using the drop-down menu. Click the box next to "Enable" to enable SSID Broadcast.
Click the box next to "Enable" to set the Wireless Network Security. Select "WEP-Open" in the drop-down menu for "Authentication." Click the button next to "Use default encryption key."
Set the Power Setting to "10" using the drop-down menu. Click the "Save" button.
Click the "System" tab above the top menu bar and click the option, "Restart the system."
For your wireless router: exit the browser application, unplug your Ethernet cables and select your network in the list of available wireless networks. Type your WEP password in the "Password" and "Confirm Password" fields. Click the "Connect" button.
How to configure SMC router.
Things You'll Need :
Plug an Ethernet cable into the back of any network computer and plug the other end into any port on the back of the SMC router.
Open the Internet browser on the connected computer. Type "http://192.168.2.1," "http://192.168.2.1:80," or "http://192.168.2.1:88" (depending on your model of SMC router) into the address bar and press "Enter."
Enter the default password for your SMC router, found in the instruction manual for your specific model.
Click "Advanced Setup," "WAN," and click "PPPoE."
Enter your username and password for your Internet connection (if any). Set the "MTU" value to 1440 and set "Maximum Idle Time" to "0" (zero).
Click "Advanced Setup," "Wireless," and "Encryption." Enter a 26-character code of your choice to password protect your network. Press "Apply" to save your configuration changes.
Those types of devices if bent, while plugged in will stop working... Sounds like if you flex it as you plug in, it is briefly making connection. Is the device still under warranty? If so I would exchange it... One way to check whats happening on connection, right click "my computer" , go to properties, go to hardware then go device manager, then under network adapters, look for a red x. As the device is plugged watch for changes. If you see your buffalo device, and it has a red X, then I would try to re-install your drivers. If the device is not staying right after being plugged, I would suspect that may be physically broken.
Hi there you can find the instructions for connecting your netgear DG8345G wireless router to your existing wireless router by configuring first your netgear router and click to help so that you can see the instructions by configuring it into your pc or you will go to the netgear support website so that you can find that model and look for instructions for your netgear router..
connect your computer straight to your internet modem.
If it works then connect the router after reset.... read the manual..if it does not work then return your router and get a new one or simply buy netgear..has been working for me Without problems for 4 years other than two years ago got fried due to electrical over charge