Question about Projection Televisions

2 Answers

1998 Sony Rear Video Projector won't power up.

I have a 1998 Sony rear video projector TV, Model KP61V75- Serial # 9000933. There was a power outage yesterday for about six hours. When the power went out I turned off all the circuit breakers in the electrical panel including the main.

When the power came back on I switched on each breaker individually. The TV, sat. receiver and a CD player are all connected to the same surge protector. My problem is this. The sat. receiver and CD player all power up and the surge protector is working. (light is on) On the Sony the only thing that comes is the red light which blinks on and off at a steady rate. I assume the TV is getting power since the red light is blinking on and off.

The TV was on and working when the power went out. Is this something that can be fixed simply and cheaply or is it time to shop. I really like this TV and would like to continue to use it if possible.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HI,,I HAVE A SONY COLOR REAR VIDEO PROJECTOR(TV),,IT WONT COME ON JUST HEAR A CLICKING SOUND,,WHATS WRONG,,HELP

Posted on Jun 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

Hi. I don't think the power outage caused your problem, I would first check the secondary fuse inside the PTV if there is one, I think your problem is the Horizontal transistor is blowed, this is located need the big grey transformer called the Horizontal transformer, or normaly T501 on the board, check to see if it is blowed, it may also be your convergence ic's, very commond, if I'm not mistaken it is located on the right hand side in the back, on that board there should be also 2 fused, see if they or open, not clear on your model, check assuming, if one of those fuses or blown then you know it is convergence.
Keep in mind a shop has to charge to cover there cost of service, it is narmaly run's about $40./hr and up, I know it is frustating to see big invoices, but they must charge to servive. I don't make enough in service, this is why I have another source of income. Don't think the industry would change but get worse. It seem's everyone just want to add to there credit card and by new one's all the time, then there the first one's to complian were the service. With time I've notice it's harder, and harder to get part's expesialy big compagny's that won't answer any question over and over again, I'm just a small figure to them and with there most famast line, send it to us, that just inposible, I just don't get it, it's to expensive what or they thinking sending a 60" PTV 10 hr's away, who would pay for shipping along.

Well I hope this help's, keep in mind sony, panasonicto and RCA to me is the worse for service when it comes for any type of help.

Bob

Posted on Feb 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to fix the sound on a 48" Sony Rear Video Projector KP-48V45


Its most likely an issue with the audio out IC . Most parts have been discontinued for that model but if you send a email request for assistance to customerservice@tvrepairworld.com they will help and they should have the audio IC available for that model.

Mar 22, 2013 | Sony KP-48V45 48" Rear Projection...

1 Answer

Sony KP-53V25 Color Rear Video Projector Powering off unexpected


possible crt problem, they have to be reseated, if not then the convergence is failing expect to pay around $300-350

Jul 26, 2009 | Projection Televisions

1 Answer

Have model #KP61V75. picture is dull and getting


Check the projection bulb to see if it is remaining bright. If it is bright, the ballast may need to be replaced.

Jul 09, 2009 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Cracked outer screen on projection tv


No it can't be repair only replaced.

Part# 4-090-943-01 $76.15
Freight charges may range from $45 - $150

Jun 10, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Color video rear projector...........color red is misaligned


convergence amplifier ICS !!! replace them and associated pico fuses ICS # start with STK

Dec 22, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Replacement Screen for 65 " Sony Color Rear Video Projector


Hi,
Try HERE to get replacement screen for your TV.
Good Luck.

Sep 26, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Sony rear video projector model # KP53S15


Have you checked your fuses in the set? You evidently have a problem in the power supply. I would check the horizontal output and low voltage regulators. Hope this helps.

Jan 16, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...