Question about Vacuums

2 Answers

Vacuum will not turn on

We use a NSS Pacer 112 for the doctors office we clean every day,
Yesterday while cleaning, it was turned off to move to another location, but when we plugged it back in and turned it on, nothing happened,

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When you take the top handle off and you look at the plug-in area we used parts of a toothpick to shim the plug-in so that it doesn't wiggle anymore, so far so good. its either this or a Oreck...

Posted on Feb 10, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Of course it could have nothing at all to do with the sweeper. Has anyone checked the outlet you tried to use? It may be at fault. Someone may want to check the circuit breaker box for a blown breaker leading to that particular outlet. If that is not the problem, you should be able to call for repair services as the NSS Pacer is an industrial sweeper and must have a pretty good warranty.

Posted on Feb 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bissell 687C Vacuum wont turn on


Try to check the circuit... as when there is an circuit fault it gains high amperage and hence fuse shut the current till it regain. It happens to save your device.. don't be doctor. Get it done by authorized person or somthing or it will cost your more then your device cost...

Mar 15, 2014 | Bissell Vacuums

1 Answer

My iRobot Roomba 780 just won't start moving to do the cleaning. When I press the CLEAN button it moves back from the dock, turns 180?, and then moves forward about an inch and makes the uh-oh sound...


make sure all virtual wall lighthouses are turned off. Your Roomba may be getting a signal to not proceed if the lighthouses are turned ON and facing the Roomba

Feb 22, 2014 | Roomba 780 Robotic Vacuum

3 Answers

Carpet cleaning


If you wet cleaned and vacuum extracted yet find carpet still quite damp,
The most common methods to dry are:
With windows open on a warm day...
Air movers
(High speed squirrel cage fans with low exhaust openings)
Designed to shoot air across the surface of the carpet...Evaporation occurs that way.
Alternatives are:
Depending on climate..running your central air or room Air conditioner with fans set around the room ,...This option is what I normally use when humidity is high in Kansas
Another option..And actually the best would be to use a Dehumidifier...They are a bit pricey new...but rentals are available

Sep 12, 2012 | Rug Doctor Mighty Pro X3 Carpet Cleaner -...

1 Answer

Roomba is dancing?


You are stuck on spot clean. Try removing the battery and reset it then try Full clean.

Feb 14, 2010 | iRobot 4160 Roomba Robotic Vacuum

1 Answer

My pacer 112 eu is not turning on? I check all conections and they are getting jucie.Can you help.


unplug and turn motor by hand a few times then plug back in and try it again.if it don't work sounds like the motor is bad.if it comes on after turning by hand then the motor is going out

Apr 27, 2009 | Vacuums

1 Answer

Was using the SteamVac and it just stopped doing


Bad news! The humming is the pump so it is still good, but that means either the ac to dc converter is bad or the motor went up. The good news, neither would be your fault.

Apr 16, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Brushes wont turn on shampooer


Dear Momneville
I have the same steamcleaner and had the same problem, I took mine apart a found a clog between the turbine and the wheel that the turbine moves by vacuum when it gets glogged there is no vacuum to move the wheel. If you are not mechanically inclined in suggest you do not take it apart unless you think you can get it back together properly.

Hope this helps
ahill_1

Dec 24, 2008 | Hoover F7220900 SteamVac V2 Upright Vacuum

1 Answer

Brushes turning slow on Hoover F5881-900 steam vac


there is a part inside called the turbine which needs to be replaced or cleaned. Also clean the brushes.

Sep 28, 2007 | Hoover F5881-900 Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...