Question about Televison & Video

1 Answer

Tuning tv in

We bought a cheap DVD player. It was working but the remote buttons were funny, so we tried our old remote out hoping it would work with the new DVD player. Since doing this we have lost all of our tv stations and cant tune them back in. Any ideas? I've tried everything I know. I think I am missing something technical.

Thanks
Rick

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 99 Answers

First of all, do you still have the vcr connected to your tv, and if so see what output setting the vcr is set to. This is most likely your problem. Try the tv by itself and see if it works, if so this is your problem.

Posted on Feb 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have bought an Antsig universal remote control for my Sony DVD CMT-GP8D but the 4 diget code is not in the operation book. Please help


Have you tried the manual option? Turn on your DVD player. Press "TV" or maybe a different button for DVD players, then a red light on your remote blinks once. Then hold both the "up" volume and "up" channel button down until your red light is permanently on. Then whilst holding your remote control 1mm away from your DVD player signal light (usually red too), hold down the "power" button until your dvd player switches off. Then switch it on again and try other buttons. However, I've only tried this on an LG TV, but took me 2 days until I really put the remote in front of that signal light. Took about 1 minute or more while holding down the "power" button. Hope it works =)

Jan 30, 2011 | One For All URC4110 Remote Control

1 Answer

I have the TruTech DVD player and I went to use it the other day and when I turned it on the blue light will come on but it will not show up on the TV. When we try to turn it off and turn it back on it...


This DVD player have power supply board and the laser eye reader problems.DVD player very cheap these day.Can buy a new one about $40.So the old DVD player,junk it,not worth fixing.

Oct 21, 2010 | TruTech TT320

3 Answers

I have bought samsung dvd player h1080 and it seems that it is region 1 how can i make it region 2. thanks


Hello,

After searching the best known region hack databases I have found one process for your make and model. I can not assure you that it will work 100% but it's the only known process.

Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"

2. Press the "Repeat" key on the Samsung remote control

3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.

4. Press "9". Number 9 is displayed on the screen.

5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.

6. Just press the "On/off" button in the remote.

7. You now have a multi-region dvd player!!

I hope this works for you, thank you for choosing Fixya!

Aug 29, 2009 | Samsung DVD-H1080 DVD Player

1 Answer

No usable code for CineVision DVD player with RCR461.. HELP!


A learning remote lets you program it with the original remote. I did it today with a Phillips brand remote I bought at Wal-mart. I have an cheap Memorex TV and when I pressed the volume down button on my Comcast remote, the TV setup menu appeared. I had to "teach" the new Phillips universal remote by pointing it at the original remote that came with my TV and pressing cooresponding buttons on both units. It was a bit of work, but it worked.

I guess this is useless unless you have the remote that came with the unit and don't mind switching to a new remote that has learning capabilities.

Dec 30, 2008 | RCA RCR460 Remote Control

1 Answer

Problem with old TV


The channel is almost always 3 or 4. Be sure you have the VCR connections correct. Just hook up the TV and VCR alone to start with and try both the VCR and DVD. Also the output of the VCR should show a blue screen.

Dec 17, 2008 | Memorex MT1194 19" TV

3 Answers

Sony RMV210 Remote Codes for iLo LCT27HA36


Salutations Schaf1,

This happens with some manufactures. Thankfully some codes will work with other TV's. This is the "Code Search" starts. Your remote has a way to try other codes to see if they will work.

If all else fails it appears Sony has a support hot-line available at 1-800-822-2217 that maybe able to help you find the code. Just make sure you cover all the troubleshooting steps you've already done.

Hope you find that code.
Jon
Go Ahead. Use Us.

May 06, 2008 | iLO LCT32HA36 Television

1 Answer

With a universal remote i need the code for the dvd player that is connected to tv,one unit.i got the tv to work with remote but not tht dvd.


Funny guy.

You need to know the brand name to start with. If it's not a well known brand, you're likely not going to find a code for it.

Codes don't exist for every tv/dvd/vcr/surround system.

If the remote you bought doesn't have your dvd player listed, then you're probably out of luck.

Try every code the instructions list. If you're lucky, one of them will work. If not, c'est la vie.

Feb 13, 2008 | Televison & Video

2 Answers

I am stuck on channel 2


some tv's default to channel 2 after being unplugged.since it is a older tv ,the buttons on the remote and the tv maybe worn down.on the tv itself try pushing the buttons down a liitle harder. if you have aux or line in/video inputs,scroll down on the channel button to log into a aux channel for the dvd player.as for the remote try buying a cheap universal remote to see if that works.
good luck
wg

Feb 02, 2008 | Zenith A25A23W 25" TV

1 Answer

Black and white picture


turn off you dvd player... them click on "setup" button on your remote control! them click right botton to appear "tv sys" them click "enter"... choose your tv system, PAL or NTSC.

Jan 15, 2008 | Pioneer DV-360-S DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71705 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...