Question about Palm Z22 Handheld

1 Answer

Password I had a Palm Z22 and lostit. I bought a used one of the internet. When I went to hot sink it to put my info I can not. There is a password in it. I do not have it. How do get around it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem go to prefs on the home page then go to security then where it says password touch it and at the bottom it will say lost password click it and there will be no password

Harrison

Posted on Mar 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a used Palm z22, the previous owner didn't clear out their password. How can I clear it so I can use


Press and hold the power button through out.

While holding the power button use the stylus or similar item to press the reset button on the back of the Z22.

Keep the power button pressed until you see the Palm logo appear.


Let go and hopefully this will reset everything, although it is not guaranteed to reset the password.

If it all works and resets everything, you should be able to set the Z22 as you want from now.

Jan 26, 2015 | Palm PDAs

2 Answers

How do I reset my palm z22 to factory settings?


If you've set a password on your handheld, any hard reset will automatically become a Factory Reset. With this method, you'll enter a password and then perform a hard reset.

  1. On your handheld, launch the Prefs application. Under General, select Security.
  2. If the Password box says "Unassigned," tap the box and create a password for your handheld.
  3. Once the password has been set, remove the stylus. Disconnect your handheld from the AC charger, if connected.
  4. On your handheld, hold down the Power button.
  5. While holding down the Power button, use the stylus to press the RESET button on the back of your handheld.
  6. While still holding Power button, the screen will show the Palm logo and a progress bar. Then the circular Palm Powered logo will appear. Release the power button when you see the Palm Powered logo.
    887_palmlogo_progressbar.gif spacer.gif 887_poweredcircle.gif Keep holding the Power button during this screen. spacer.gif When you see this screen, you can release the Power button.
  7. A message will appear warning that you are about to erase all the data stored on your smartphone. Press UP.
  8. You'll see a series of Palm logo screens, then a prompt to tap onscreen targets. The Factory Reset is complete.

Apr 15, 2010 | Palm Z22 Handheld

2 Answers

I tried to sinc my palm Z22 with my new computer, but It shows that my drivers aren't installed. what's wrong??????????????


Palm as a corporation went out of business years ago, and there are no drivers for the new Microsoft Windows versions that were made AFTER Palm no longer existed! HP (Hewlett Packard) bought the Palm Operating System and has the basic the basic drivers and manuals online, however, only "other" corporations that use various PALM type devices, now support interfacing. I have listed all those that I have found on my web page, dedicated to repairing, maintaining, and interfacing the Z22, at:
kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html
I do not SYNC my Palm at all, so that you will have to rely on all the USER comments that I have included.

good luck

robin dusty graves

Z22 PALM PILOT tried-sinc-palm-z22-new-computer-ngl0e1lc0ft3j10pmz4xzklk-3-0.jpg tried-sinc-palm-z22-new-computer-ngl0e1lc0ft3j10pmz4xzklk-3-1.jpg tried-sinc-palm-z22-new-computer-ngl0e1lc0ft3j10pmz4xzklk-3-3.jpg tried-sinc-palm-z22-new-computer-ngl0e1lc0ft3j10pmz4xzklk-3-6.jpg

Mar 08, 2010 | Palm Z22 Handheld

2 Answers

My computer went down and I lost my calender info that was on Palm. I have a Palm Z22 which still has my calender. Can I sync the handheld with the computer only?


Hello cskennedy:

Many people are asking the same question, as well as how to deal with touchscreen and battery problems etc.

I have really explored all the aspects keeping a Z22 up and running, and have a complete web page devoted to this.

I am repeating a previous answer below:

The support page for the Z22 has moved around over the last couple of years. HP (Hewlett Packard) bought PALM and still has a fairly good coverage of what WAS available. Beware that Windows has gone to 64 BITS with Windows 7, Windows 8 etc, so that older software does NOT immediately work.
There are many features of the Z22 such as NEWS and GAME web portals that are shut down, so that peripheral connectivity is at a minimum.
HP has the last known working, native, connection software at:
http://kb.hpwebos.com/wps/portal/kb/na/zire/z22/unlocked/home/page_en.html
On my web page at :
http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html

I have all the patches, fixes, work-arounds, maintenance, tips and tricks I could find.

Hope that this helps you to get your PALM Z22 working and useful once again!

good luck

robin dusty graves





Z22 PALM PILOT computer-went-down-lost-calender-info-cdqazwk5fkdpm30unkbxcrm5-3-0.jpg computer-went-down-lost-calender-info-cdqazwk5fkdpm30unkbxcrm5-3-1.jpg computer-went-down-lost-calender-info-cdqazwk5fkdpm30unkbxcrm5-3-3.jpg computer-went-down-lost-calender-info-cdqazwk5fkdpm30unkbxcrm5-3-6.jpg

Dec 05, 2009 | Palm Z22 Handheld

2 Answers

Can't reset my password on my Palm Z22


Hi,
If you have forgotten your password you should be able to use the password hint to figure out what it is. You can try a soft reset to see if that will clear the password but I am pretty sure this won't help. To do a soft reset use the tip of the stylus or something pointed like a paper clip and inset it in the hole on the back of your palm pilot. This will make the unit reset it's self. If this doesn't help then you must preform a Hard rest to continuing using your hand held. You need to make sure that you have all your information backed up on your computer as a hard reset will erase everything on your hand held. Here are the steps to do a hard reset:

1. Press and hold the power button.

2. While holding the power button, use the tip of the stylus ( or a similar object without a sharp tip) to gently press and release the reset button inside the hole on the back of your handheld.

3. Wait for the Palm Powered logo to appear, and then release the power button.

4. When you see the message that warns you about erasing all of the info on your handheld do one of the following:
a) Press UP on the 5 way navigator button on the bottom of your handheld to finish the reset and show the touch screen.
b) Press any other button to do a soft reset.

5. When prompted , tap to align the screen, and then set the language you want to use on your handheld. A screen appears showing the Palm logo and a progress bar. From there continue to set up your Palm and then do a hot sync. You should be able to reset a password if you want one. Best wishes....Hope this helps.

Aug 27, 2009 | Palm Z22 Handheld

2 Answers

Palm z22 freezes up when traveling by air. hard


You need to make sure that you have all your information backed up on your computer as a hard reset will erase everything on your hand held. Here are the steps to do a hard reset:

1. Press and hold the power button.

2. While holding the power button, use the tip of the stylus ( or a similar object without a sharp tip) to gently press and release the reset button inside the hole on the back of your handheld.

3. Wait for the Palm Powered logo to appear, and then release the power button.

4. When you see the message that warns you about erasing all of the info on your handheld do one of the following:
a) Press UP on the 5 way navigator button on the bottom of your handheld to finish the reset and show the touch screen.
b) Press any other button to do a soft reset.

5. When prompted , tap to align the screen, and then set the language you want to use on your handheld. A screen appears showing the Palm logo and a progress bar. From there continue to set up your Palm and then do a hot sync. You should be able to reset a password if you want one. Best wishes....Hope this helps.

Aug 26, 2009 | Palm Z22 Handheld

1 Answer

Forgot password can't hotsync z22


Hi,
The first thing I would do would be to do a hard reset and then you should be able to hotsync it. I am sending you a link to the palm support for your z22. At the bottom of the page is a link for free chat. I have used this myself and I was able to get my problem solved in a few short minutes. Hope this helps. Gotta love that palm.

http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/supportservices/page_en.html

Aug 21, 2009 | Palm Z22 Handheld

1 Answer

Palm sync doesn't work even though it says sync complete.


1. Right click on red/blue arrows on lower right of pc
2. Select custom
3. Check direction for all
If you found this helpful, please post as such. If this fixes of coarse, please post as fixya

Jan 02, 2009 | Palm Z22 Handheld

1 Answer

Palm z22


use paperclip like tool to press reset button hole and same time hold power button once you release the power button it will give you confirmation for full reset

Apr 29, 2008 | Palm Z22 Handheld

1 Answer

How to download current Zire info to new Palm Z22


My son said to just install the new software and see if it would transfer the data via the sync feature, and it did. The new Z22 software must have written over the existing Zire and incorporated all the data.

Apr 22, 2008 | Palm Z22 Handheld

Not finding what you are looking for?
Palm Z22 Handheld Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm PDAs Experts

MUSTAFA BULENT...
MUSTAFA BULENT...

Level 2 Expert

166 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Are you a Palm PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...