Question about Toshiba Satellite M45-S355 (PSM40U073001) PC Notebook

1 Answer

Boot Up problem on a Toshiba Satellite M45-S355

This is the thread that I found for my problem. I'm cpd808, can you help?
http://www.fixya.com/support/t225712-boot_up_down

Posted by on

  • Corey D Feb 11, 2008

    Yea well i'm not an expert or anything when it comes down to the motherboard and what-not, but I would deff. like to know the outcome of the one you're working on now. I've tried everything that i can think of....so keep me posted.

    Thanks.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 181 Answers

Hi,
Well, since the thread was posted, I've had an M55 come in with almost the same symptoms. I believe, in this case anyway, the video module's solder joints have started to break away from the motherboard. Very frustrating diagnostic on this.
Wish I had more help. I'd be happy to keep you posted on how this one comes out.
Thanks

Posted on Feb 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a New Home sewing machine. Model sx2122. I need to know how to set up threading the machine and the bobbin.


New Home machines were built by Janome. I found the manual for sale here: https://www.sewingpartsonline.com/instruction-manual-janome-2122.aspx and here: http://www.sewusa.com/Sewing_Machine_Manuals/New_Home_Manuals/New_Home_2122.htm . The SewUSA has a threading diagram for the very similar 2022. The images were broken unless I started here: http://www.sewusa.com/Sewing_Machine_Threading_Diagrams.htm . Then scroll down and look for the machine number under the New Home header.

I hope this helps.

Cindy Wells

Jun 21, 2018 | New Home Sewing Machines

2 Answers

After 3-4 stitches, machine shuts down. On display panel E6 show up.


Error codes are on page 62 of this manual.
It says " The motor locked up because the thread is tangled.
Remove the tangled thread before continuing operetion."
I would guess that this could happen for anything that would cause too much load on the motor.

http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_CE_5000PRW_EN_1444.PDF

Sep 24, 2014 | Sewing Machines

1 Answer

New home l372 threading diagram


Here is a guide I found on fixya.

http://www.fixya.com/support/t5900868-thread_machine

It looks pretty straight forward. Make sure your pressure foot is in the up position before you start to thread. Good luck.

Aug 01, 2012 | New Home L-372 Mechanical Sewing Machine

1 Answer

How to thread a necchi 931


Found this on another page http://www.fixya.com/support/t2568348-necchi_4757_need_know_way_needle- with many thanks to Paul Howell.I've modified it slightly for the 931

...Thread the machine from the spool, left to the guide on top/rear, over the top towards the front, around the tensioner down through the large channeled guide below it and up (picking up the thin wire guide on its way) around the take-up lever from right to left, down through the semi-hidden guide, through the needle clamp guide and thread the needle through the front to the back.


4_9_2012_5_59_53_am.jpg

Mar 12, 2012 | Necchi 4575 Mechanical Sewing Machine

1 Answer

How do I thread the machine


Raise the presser foot.

Place the thread spool on the spool pin so the thread feeds from the back of the spool.

Place spool cap against the thread spool.

Take the thread across to the first guide, then down the first slot, back up the next to catch the uptake lever, then down to the needle.

At the top of the needle there should be a metal "hook" that helps hold the thread close to the needle.


I found a download for the manual at this site for $5.00 - http://www.mastersewusa.com/infos_132Q_Featherweight.html

Apr 02, 2010 | Singer Featherweight 132Q Mechanical...

2 Answers

Disable boot up password in R51


You could open up the R51 and remove the CMOS battery. This would reset the password.

Here is a link I found that allows one to hack the BIOS password:
http://sodoityourself.com/hacking-ibm-thinkpad-bios-password/

Or try this fixya thread:
http://www.fixya.com/support/t1641914-ibm_thinkpad_r51

Feb 06, 2009 | IBM ThinkPad R51 Notebook

Not finding what you are looking for?

Open Questions:

See all Toshiba Satellite M45-S355 (PSM40U073001) PC Questions

Toshiba Satellite M45-S355 (PSM40U073001) PC Notebook Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

pankaj rautela
pankaj rautela

Level 3 Expert

1252 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...