Question about Standard (CRT) Televisions

4 Answers

Tv troubleshooting no power

Posted by on

  • 3 more comments 
  • bnegle Mar 26, 2008

    I have the same no power problem. Working the day before, next day won't power on. Can't find access to fuse or any reset buttons. Can you help?

  • raili_sherwo Nov 23, 2008

    yeah, i have the same problem. the TV was working perfectly last night...today, when I try to power it on, no power.

  • kat2008 Dec 02, 2008

    I have the same problem. The TV is dead. Can you provide me with some more details about the solution?

  • WELTER11 Dec 14, 2008

    I HAVE A HL-P1636 61 INCH DLP TV AND IT POWERS ON AND OFF ON AND OFF WHEN ITS COLD.

  • Anonymous Jan 06, 2009

    I have a 32 inch JVC and we left in the garage over night to move it and now the picture has a black line running down the left hand side and the color is not very clear and crisp. - help

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HI I HAVE A PROBLEM WITH MY 32" SONY TV MODLE NO:KV32FX20U. IT TAKES LONG TO START UP WHEN COLD FIRST THING AND WHEN IT STARTS UP THE PIC QUALITY GOES PINK NOT A CLEAR PICTURE QAULITY!! CAN SOMEONE TELL ME WHAT IT COULD BE???

Posted on Feb 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tv turns on but doesnt have a picture channel selection appears but no picture

Posted on Jul 28, 2008

Open the cabinet by removing the multiple screws around the back of the unit. Separate the screen from the rear cabinet. It is stiff and be careful. You will see the AC power cord connecting to the circut board to the rear left of the TV. (You may need a flash light) look down slightly to the right of the power cord and you will see a small fuse. remove the fuse and inspect it. Mine was blown and I replaced it. It was a small 6.5A/250V fuse. You should be able to get them at radio shack. This a $5 solutions for a $75 repair shop problem. Good luck. contact me if you need more help

Posted on Apr 25, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Check the cord,fuse,fussable resistor, and replace the horizontal transistor.

Posted on Feb 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power button does not work on front of TV or on remote.


Try the tv in a different outlet. If the TV still doesn't turn on take it to a repair shop if you have no experience troubleshooting electronics.

Feb 18, 2015 | Toshiba 27A45 27" TV

1 Answer

TV WILL NOT TURN ON DO TO A POWER SURGE


There is no reset button outside. The main power supply regulator section [SMPS] should troubleshoot. Contact any service technician. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up older posts.

Dec 29, 2013 | Standard (CRT) Televisions

1 Answer

Crt standard hisense 54cm colour tv model tc2198L no powering fuse ok HOT ok.


Check the power supply.If you have no output from the power supply try to disconnect the power supply from the other circuits ( such as the IF,audio,video,horizontal,vertical,etc.If the voltage at the power supply comes up when you disconnect a particular circuit then that circuit is loading down the power supply and you would troubleshoot that circuit.If after disconnecting the other circuits and the power supply still shows zero,then you would troubleshoot the power supply.

Sep 14, 2013 | Standard (CRT) Televisions

1 Answer

The timer and standby lights are blinking at the same time. TV turns on for a few seconds then turns off. Both fans turn on when the TV turns on and off when the tv turns off. Any idea what might be...


The problem if you television is in the power section.The power suppy shutoff because they have leak parts like capacitor and transistor.Its better to troubleshoot the power supply.Thanks

Jul 09, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

The TV will turn on, just blinks on standby.


Sounds like you may have experienced a power surge and the switch mode power supply has become defective...you will need someone with technical knowledge to troubleshoot this power supply as it is very difficult to diagnose without proper training

Dec 25, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

TV will not power up, no lights blinking just a continuous beeping sound


Please follow the below troubleshooting steps: 1. If the Television is plugged into a surge protector, remove it from the surge protector and plug it directly into the wall outlet. 2. Try connecting the TV to a different AC wall outlet. 3. Try power resetting the TV. To Reset the TV, disconnect the power cord for a short period of time (approximately 1 minute), then reconnect the power cord and power ON the TV. 4. If the issue still persists, TV will require service.

Jan 23, 2010 | Sony FD Trinitron WEGA KD-36FS130 36" TV

1 Answer

Does not turn on, light flashes, it clicks once, the remote control will not even turn the light on


Please follow the below troubleshooting steps: 1. If the Television is plugged into a surge protector, remove it from the surge protector and plug it directly into the wall outlet. 2. Try connecting the TV to a different AC wall outlet. 3. Try power resetting the TV. To Reset the TV, disconnect the power cord for a short period of time (approximately 1 minute), then reconnect the power cord and power ON the TV. 4. If the issue still persists, TV will require service.

Jan 21, 2010 | Sony FD Trinitron WEGA KD-36FS130 36" TV

1 Answer

No power to tv


if there is no power at all, it might be your power supply, go to discountdashmerchantdotcom and call them, they'll troubleshoot you for free, they've treated me great, it's totally worth it. Good Luck Hope I was helpful

Jun 29, 2009 | Panasonic CT-32HXC14 32" TV

1 Answer

Magnavox model TS2768C101


Requires troubleshoot,locate and replace bad caps in horiz
drive circuit. Usually 47mf/25v..................+ solder any/all
bad connects = prevent maintenance................T.

Nov 04, 2007 | Philips Magnavox 27MS343S 27" TV

1 Answer

Troubleshooting


Is it plugged into the power ? A fuse could be blown. A power supply failed. Short happened in the load on the power supply. All of these will stop the set from coming on and several more. You need to have it checked out. Stargazer

Aug 12, 2007 | Curtis CM19102 19" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...