Question about Panasonic PV-GS320 Camcorder

2 Answers

Playback problems - timer stays at zero

Hi im hoping someone could help with a problem i'm having. Ive been using a panasonic NV-GS320 camera for about 8 months, to date with no problems. Ive just tried to record some footage, but when i tried to play it back, i just get a black screen, with the timers. This is the same whether using the LCD, viewfinder, through my tv, or firewire to my pc. The tape counter stays at 0:00:00, but the "tape remaining" counter counts down as normal.I then tried to playback some previous tapes that have always worked no problem and they show exactly the same thing.

The last time I used the camera, about a month ago, everything worked perfectly.
I have tried everything I can find in forums etc, tape cleaners, taking the power out for 60 secs, pressing reset button, but nothing.
If it helps, the screen works perfectly in record mode, and also when viewing photos from the memory card. Ive also always used JVC tapes, never changing brand so i dont think its that either.

Any suggestions would be appreciated!!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mi proble is: the power is gone, no power in the camara
please giveme a solution att. norman mejia
group A 893
group B 5889
group C 511833
val # 0294-2802-9294-4641
I

Posted on May 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Firewire transfer problem with PV-GS320. HAd bought the PV-GS90 and ran into significant transfer issues importing to Mac (iMovie and Fincal Cut Express HD both had problems). Upgraded to GS320 as Macworld rated it highly. Same problems: video plays back perfectly with no computer connection. once connected, video and audio stutter, go out of sync, sometimes just stop and/or crash the program.

I've used a borrowed Canon GL with this Mac before with no issues, so I suspect the camera. Have tried reset button, trashing preferences, restarts, the works. still can't get clean video to transfer from a brand new camera. Any Ideas?

Posted on May 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I DONT HAVE THE DRIVERS,CAN I GET SOME?


Yes get your camera drivers here
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts

May 26, 2010 | Panasonic NV-GS11B Mini DV Digital...

1 Answer

Panasonic NV-GS27 playback


you can playback only when you connect it to a pc tv tuner card. or other video editing or capturing software installed for camera

Jul 01, 2009 | Panasonic NV-GS27 Mini DV Digital...

1 Answer

Lost my CD software for Panasonic PV-GS320


Hi,
You can download the operating instructions from the following link:
Panasonic PV-GS320 Camcorder
http://service.us.panasonic.com/OPERMANPDF/PVGS320-MUL.PDF
Hope it helps

Jun 22, 2009 | Panasonic PV-GS320 Camcorder

2 Answers

LCD broken Panasonic PV-Gs 320


Hey, all.

I also have this problem, but have a little more to add:

Here is a website that carries the lcd screen: http://www.pasc.panasonic.com/Epartr/PartsList.asp

I think that its the following part number:

L5BDDYH00022 LCD DISPLAY (MONITOR) 87.56
$87.56 sucks, but it could be worse. Problem is now, I'm not sure how to replace it without taking the entire camera apart.

Let me know if someone does this successfully.

Thanks!

EAL


Oct 30, 2008 | Panasonic PV-GS320 Camcorder

3 Answers

NEED HELP


G'day,

I also have the same problem and after almost buying a replacement I thought I would try one time to get it to go.

What I did was start the cam without a tape in it, let it bring up the little red icon indicating no tape inserted, (it hadn't started flashing "PLEASE RE-OPERATE AFTER PUSHING RESET BUTTON" at this stage) then I inserted my tape. Hey presto, it works although for how long I don't know. I'll immediately start burn my tapes to disc while the going is good.

Hope this helps someone

Aug 22, 2008 | Panasonic NV-DS38 Mini DV Digital...

1 Answer

Black lines on playback no playback


hi, if you have stuck the head cleaner in and this has not removed the black lines then the head might either need a thorough clean or may be damaged.

Jul 03, 2008 | Panasonic NV-GS17 Mini DV Digital...

4 Answers

Panasonic NV-GS50 black screen


hi also the same problem is there any way to solve the problem,please help me,

Mar 17, 2008 | Panasonic NV-GS50 Mini DV Digital...

4 Answers

No recording/playback


try with software support. head sw pulse may defective.

Dec 10, 2007 | Panasonic NV-MD9000EN Mini DV Digital...

Not finding what you are looking for?
Panasonic PV-GS320 Camcorder Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1671 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

zimcloud

Level 2 Expert

120 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...