Question about Jura Capresso C1300 Coffee Maker, Espresso Machine

1 Answer

Jura impressa S70

Haven't used my machine in 6 months..tried to start it up and it grinds and grinds trying to turn on then i get a message saying malfunction 8...help

Posted by on

  • Anonymous Mar 16, 2014

    panne 8 sur jura impressa ultra

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 46 Answers

Its a grinder group fault , the seal on the internal group head (the part that compresses the ground before brewing) has stuck or gone dry from lack of use. if u gain access to the internal of the machine( may need a special tool, oval head srews) grease with food grade lube, the red/orange seal on the long 45 degree cylinder inside. u can manually turn the gear by hand once inside. If still a problem check the motor that drives the same unit.

Posted on Feb 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turning dial after choosing strong, we want 4 oz, but turning dial toward 4 it may goe to 5 and then up to 7 down to 6, up to 8, etc.


Operating Manuals - Jura Capresso Coffee Machines

capresso.125west.com/html/operating_manuals.html
Operating Manual Impressa F9 and F9 Limited Edition. Operating Manual Impressa F7. Operating Manual Impressa E8. Capresso C1300 Superautomatic ...

Sep 06, 2015 | Jura Capresso Impressa E8 Espresso/Coffee...

1 Answer

Why fill bean message shows on display when machine is full of beans?


Difficult to say without the machine in front of me. Normally you get this response if no beans fall into the grinder. Are your beans oily, sticking together and not falling in?
Normally freshly roasted beans esp dark roasts are a bit oily. If so then you can change roasts, brands or mix with another type.
You might try to adjust your grind per the manual. (turn knob inside the bin while the grinder is grinding) see #8 page 12.
If the beans are falling in and grinding and you still get this msg I would say you have a grinder problem.
http://capresso.125west.com/e8_manual.pdf

Mar 02, 2015 | Jura Capresso Impressa E8 Espresso/Coffee...

1 Answer

Jura capresso e9 water not coming through spout


Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back.
Thank you
Rick

Nov 29, 2011 | Jura Capresso Impressa E9 Espresso Machine...

1 Answer

Hi there, I just purchased a Jura S9 One Touch. I've used it for a week, maybe making 10 coffees/day. Just yesterday an ERROR 6 message popped up. I don't know what to do, please help?


Hi, Error 6. Haven't come accross that one before. It sounds like brew unit problem.I do know error 7&8 are brew unit problems and 1 to 5 are water flow and heating errors. Try turning off the machine at the main power button and unplug it from the wall for a few minutes. This will reset the machine and right it self. They can do this from time to time. Dazza

Sep 23, 2011 | Jura Capresso Impressa S9 Coffee...

1 Answer

Impressa F9 Espresso Machine: First the coffee grinder stopped working -- the re...


i always start by turning machine off at the power point and rebooting machine. i have a Jura but not your model - try pulling out the drawer and container that collects the used ground coffee and with a damp cloth put your hand up in the machine to the shute and wipe away any residue that might be left there. good luck

May 05, 2010 | Jura Capresso Impressa F9 Espresso Machine

1 Answer

Jura f70 error 8 solution


There is a Jura Error Guide that says:
  • Turn machine off, turn the main power switch off and unplug machine for at least one minute.
  • Turn machine on again. If the error message comes up again, try one more time.

Dec 31, 2009 | Jura Capresso Impressa Z5 Espresso/Coffee...

2 Answers

Impressa S70 - Malfunction 3


This indicates that either the sensor for the thermoblock is defective or the thermofuse is blown. For this you need to go to your local dealer for service. I also recommend that you measure out the mains.
In worst case the powerprint or the mainboard sends wrong signals to the thermoblock so it`s overheated.

Aug 02, 2009 | Jura Capresso Impressa E8 Espresso/Coffee...

1 Answer

Jura Impressa E fails to dispense, then gives "open tap" message


I had the same problem, when I called their very helpful customer service, I was given these directions.
Take out the tray.
Inside the machine you can now see a flap hanging from the top.
Reach behind the flap, and you should feel a round object/filter. It has a little dimple sticking out in the middle.
Wipe the filter with a paper towel.
Put the machine back together, and voila you got your coffee brewing again.

Jul 03, 2009 | Jura Capresso Impressa Z5 Espresso/Coffee...

Not finding what you are looking for?

Open Questions:

See all Jura Capresso C1300 Coffee Maker, Espresso Machine Questions

Jura Capresso C1300 Coffee Maker, Espresso Machine Logo

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...