Question about Zanussi ZWF1430W Front Load Washer

3 Answers

Zwf1430w display problem

Machine display stuck on 301 won't reset

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My Zanussi ZWG1120m is displaying fault code E60 and E62
I have ben told that the machine needs to be reset. lease can anybody tell me how to reset the machine.

Posted on Sep 17, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 236 Answers

Are you sure its not a fault code e01? check your manual for the fault code.

Posted on Feb 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 96 Answers

There is no error code 301. All the error codes start with an E in front. If the problem is that there is a Delay time set, then you have to hit the Start/Pause button then the Delay button until it comes down to "0" then the Start/Pause button again.

Posted on Mar 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turns on. Fills with water, then why does it display error code e60?


Someone posted a list of codes: Error code e60 zwg 1140m
Some people say they just pressed and held the reset button for 5 seconds.

Nov 26, 2015 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi 6hg 1400 rpm won't drain


My machine won't fill up with water and I noticed it started flashing e21 and its not spinning very well either what could the fault be

Aug 17, 2012 | Zanussi ZWF1430W Front Load Washer

1 Answer

MACHINE STUCK ON F50


Fault code f50 is a stalled drum drive motor fault. Move the wash drum does it move freely? If it is stuck look and see for anything obvious that might be jamming it. Another problem could be the motor rps sensor not sensing the motor turning. check sensor for anything in its way

Jun 05, 2012 | Zanussi ZWF1430W Front Load Washer

1 Answer

IS IT EASY TO REPLACE THE DOOR SEAL/GASKET ON ZWF1430W


it is very very difficult to replace the door seal on a zanussi washing machine, its best fitted by an engineer

Feb 03, 2010 | Zanussi ZWF1430W Front Load Washer

3 Answers

Model ZWF1437W


Try holding 'end of cycle' signal till the error light goes off.

Apr 29, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi washing machine


Filter can be clogged, pump can be dead or water outlet clogged.

Apr 11, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi ZWF1437W washing machine - wont start


The error message "Err" usually indicates that the wash program and option are not compatible. 40 degrees and 900 rpm Spin should be o.k.. I would try another wash program with no special options and see if the problem goes away.

Jan 24, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi washing machine


E90 is not a listed error code however most 90 range codes relate to a faulty pcb, some times worn motor brushes and blocked filter and air traps can cause some innacurate error codes being displayed we would normally check these items prior to replacing the PCB Regards Advisor

Sep 01, 2007 | Zanussi ZWF1430W Front Load Washer

Not finding what you are looking for?
Zanussi ZWF1430W Front Load Washer Logo

1,288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...