Question about Standard (CRT) Televisions

2 Answers

Panasonic 32 Recently I have noticed that the picture size on my 6 1/2 year old Panasonic CT-32D11E appears to be shrinking. I am wondering if this is just a sign that the tube is beginning to fail or is there a way of adjusting the picture size on the screen. It is most noticeable in the horizontal with black space appearing on both sides of the picture. After removing the back I only see adjustments for Focus and Screen and the one for Screen does not seem to control the size of the picture.

Posted by on

2 Answers

Your on the right track the 2 you are talking about are on the high voltage,carefully look around the front of the board thier will be a potentometer white very small say,s h weith turn it.you,ll get about 1in increase or reduction.

Posted on Mar 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a panasonic satellite box and a Sony DVD recorder and I have been trying to put guide plus onto it without any luck, can you please help me.

Posted on Feb 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic CT-32g19j


check The B+ of your tv. If no b+ Check the input AC voltage. If Ac i/p are ok but no B+ Volt maybe your IC in power supply has problem.

Jun 01, 2009 | Panasonic CT-32SL14 32" TV

2 Answers

Panasonic TV picture shrinks to a line


There is an IC which controls the vertical deflection and over the course of a few (or 8) years with the set heating up and cooling off some of the connections work their way loose causing the symptoms you describe.
If you were to bang on the side of the set you could likely "pop" it back in but this is not a good solution. The vertical IC needs to be re-soldered. This is especially common in Panasonic sets. About 10 minutes with a soldering iron should have it worked out.

If you're handy with a soldering iron I can tell you what to look for.

Oct 09, 2008 | Panasonic CT-32G14 32" TV

1 Answer

Power just quit had a great picture


panasonic tv's suffered from frame chip problems causing them to be stuck in stand by .not an expensive part though...

Apr 25, 2009 | Panasonic CT-32SL14 32" TV

1 Answer

Picture narrowed in. black lines on sides


check and or replace the following :
q551
d830
d825
r818
repair must be done by qualified tv pesonnal

Jan 22, 2009 | Panasonic CT-32D12D 32" TV

1 Answer

Picture shrinks horizontally every few seconds.


You are changing parts in the wrong circuit. The problem is in the vertical circuit. Look for the vertical IC and resolder the pins first. It should be an LA7837 or something similar. Also, check the 100ufd and 47ufd caps in the same circuit.

Keep us posted.
Dan

Jan 19, 2009 | Panasonic CT-20G11 TV

1 Answer

Panasonic CT-32G6E Intermittent single horizontal line


I would suggest to locate a part that looks like the one on this link and re solder all the pins, also check for any high power resistor nearby the IC295890 and put some fresh solder.
Let me know if you need further assistance.

Aug 07, 2008 | Panasonic CT-32G6 32" TV

1 Answer

No picture no sound nothing


We had a TV repairman look at our 3 year old (Oct 2004) Panasonic CT-32HXC14J FLAT SCREEN TV. It suddenly stopped working and appeared to have no power getting to it. It was a high voltage supply or transformer that was bad and has to be replaced - estimated cost is around $400. In a year we will also need to spend around $125 for a digital converter box. We went for the repair since that is still cheaper than a $1,000 plus equivalent size LCD or plasma.

Our old tube tv was still working after 15+ years. They aren't making them like they used to. Way to go Panasonic.

Nov 09, 2007 | Panasonic CT-32HXC14 32" TV

1 Answer

Panasonic CT-32SL14 32" TV


do you have any electronic skill ????

Jul 20, 2007 | Panasonic CT-32SL14 32" TV

1 Answer

Black border


u are have a horizontal problem. seek pros help

Dec 25, 2006 | Panasonic CT-36G34 36" TV

1 Answer

Panasonic CT-32hX41 vertical picture problem (hourglass)


this product has a pincushion problem and requires servicing but unfortunatley it is what we call in the business NECO

Dec 05, 2006 | Panasonic CT-27HL14 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68229 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...