Question about Projection Televisions

3 Answers

Hls6186w dlp shuts off

Hey i bought this tv brand new 1 year and 2 months ago my problem is it turns on takes a min for picture to come in but is not as sharp and crisp as before then shuts of get 3 blinking lights try to turn it on get a high pitch squeeling so i changed the lamp but same thing so i called tech he says its the lamp duh so i let him change it same thing happens now i need color wheel also and lamp and lamp driver can this be right been on the phone with the samsung people getting no help just the regular warrany is up cant do anything can anyone help

Posted by on

  • 2 more comments 
  • stanman00
    stanman00 Feb 08, 2008

    there is no noise untill i turn it back on then it wont turn off

  • stanman00
    stanman00 Feb 08, 2008

    ican turn it on normally itstarts starts to come on picture dosent look right has color but not crisp then it shuts off and when i turn it back on i get the squeeling noise boy i hope your right about that 15 months thing mine is 14 thanx

  • stanman00
    stanman00 Feb 11, 2008

    i saw somewhere FYI said how to get past samsungs customer service so ican talk to someone else all these peolpe tell me is theres nothing they can do because tv is past warranty thanx

  • stanman00
    stanman00 Feb 16, 2008

    samsung wont help me the set is 14 months old and out of warranty i need fyi totell me how to get past the samsung customer service there was a certain way to do it on the phone thanx

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

After you turn the set on and then it goes off if your lose the noise as soon as the picture leaves you likely need a light engine. If the noise is there a second or two after the pciture leaves you have a bad color wheel.

Posted on Feb 08, 2008

  • Dewayne Turner Feb 08, 2008

    Does the noise stop in a short while after you turn the set on? If so you probably have a color wheel with really bad bearings. Since you cannot shut the set off and have to unplug it you probably have a bad DMD module as well. I would suggest you need an optical block assembly which would inlude both of these parts as well as the ballust assembly. If you set is less than 15 months old it is highly likely Samsung will extend your warranty to ge this taken care of if you have a sales receipt.

  • Dewayne Turner Feb 16, 2008

    I would call Samsung back and ask to escalate this to upper management.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

It seems like power supply problem.Most possible some electrolytic capacitor at power supply output may have gone out of range.Try replace capacitors of more than 100V.

Posted on Feb 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Hello sir

Posted on Feb 08, 2008

  • 2 more comments 
  • dewan nafees ahmed Feb 08, 2008

    sir, i think ur lamp is getting faulted by some other component on board.

    look for the input given to lamp from the circuit board.

    i think the real culprit lies there.

    only if r going to look at it you can save your lamp next time.

    else it wil become a regular story

  • dewan nafees ahmed Feb 08, 2008

    since its just 1 or 2 months old you better ask for a full replacement from smasung.

    the set utself is bad inside.

    they have sold you a faulty piece

  • dewan nafees ahmed Feb 09, 2008

    i would suggest a replacement from samsung as the best option..

    because without having proper knowledge about your TV you dont take risk of opening it..

    if u want to do it further do it at ur own risk

  • dewan nafees ahmed Feb 16, 2008

    why has this thread not yet closed?

    what happened here?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rca projection tv


The white dots indicate a problem with the optical light engine---Parts for this set are very expensive and my suggestion would be NOT to repair it but replace it.

If you want some more information Google the model with "problems" to see what the common issues are fot this set

Dec 07, 2012 | RCA Projection Televisions

2 Answers

"Fan lock"


Use the below link to locate ur nearest service centers ...
its an hard ware cognitive factor u alone cant rectify it ..


http://maps.jvc.com/cAscList/index.asp

http://maps.jvc.com/cAscList/index.asp

Dec 23, 2007 | JVC HD-56FN97 56" Television

2 Answers

My tv mitsubishi wd-60735 turns on for about 2 min. then shuts off and red lamp light turns on,,,The lamp is only 3 months old.. Do I just need to replace bulb again or is it something else???


Don't know if this applys to you but if you have purchased anything but Osram or Philips replacement lamp for your DLP tv then this is probably your problem.. The generic is VERY tempting in this recession but in this case generic is poison to your dlp tv... i have a Mitsubishi 60735 and went thru 2 generic bulbs when my tv kept shutting down on it's own and the lights on front would flash, i could cut it back on for 10 minutes then flicker and shut down again ..well since the bulb was new i thought it may be defective so i got is exchanged for another one ... after all of the post i have seen how much repairs were going to cost on dlp sets no matter what the problem was ..i was ready to chunk the tv out the door when the second lamp was doing the same thing.....!! well a last ditch effort to save my tv before i trashed it or taking it apart to dissect it.. was to buy a brandname lamp ... in my case i purchased a Philips ..it cost twice as much =/ ..i could just return it if it didn't work.. well it was the generic lamps that was causing trouble.. the brandname worked perfectly .. i am just glad the generic lamp didn't do any damage to my TV!!! I have done further research on the generic lamps and realized that the damage it could have done was not worth the money i saved when i purchesed it... Generic is a great deal In some cases (household cleaners, etc..) but in this case GET THE NAME BRAND!!!! the only name brands i know of for these lamps are Philips or Osram/Sylvania.. hope this helps others from this headache. Do your research don't by generic lamp replacements, your DLP set cost to much to risk it.

Jul 20, 2011 | Mitsubishi WD-60735 Projection Television

1 Answer

SAMSUNG DLP SLIM 50" AFTER I TURN IT OFF IT WONT TURN BACK ON TILL 30 TO 50 MINS LATER THE THREE LIGHTS IN THE FRONT BLINK. iT ACTS LIKE ITS GONA TURN ON BUT IT DOESNT IT JUST MAKES THE NOISE AND FLASHING...


Chris,

I had the same problem. I bought my tv at Best Buy and my warranty included a new bulb for the lamp. They only last about 2 yrs or so depending on how much you watch the tv. You can also buy replacement bulbs online that don't cost too much. BUT, you will need to replace every couple of years. The things you listed are exactly what happens when the bulb goes out. Hope this helps!

Sep 14, 2010 | Samsung 50" Slim-Depth DLP HDTV

2 Answers

No picture, siren type noise as restarting


My Toshiba dlp 62hm116 was used for 3 months then stored for 2 years, I turned it on yesterday and it makes a loud grinding noise which I think is probably from the exhaust fan area and the picture is black except white at both vertical sides. It worked fine the last time I used it 2 years ago. Any ideas?

Jan 13, 2010 | Toshiba 62HM95 62" DLP HDTV

1 Answer

The tv shuts off after 15 to 20 mins. then 15 to 10 mins then 10 to 5 minutes. I tried to blow the dust out of the back but now it only comes on for a few seconds and shuts off again.


Im not sure what brand you are inquiring about. My Hitachi 50v715 DLP did the same thing and it turned out to be the Lamp was going out. I bought a new original hitachi lamp(phillips) and put it in and it works great. So if your lamp has not been changed out in a couple of years then its probably time. Hope this is helpful.

Oct 16, 2009 | Projection Televisions

1 Answer

DLP HDTV shut off, sound but no picture


replace light bulb,
if you are hearing a click like the stove is because the lamp balast is trying to power on the lamp,
if you need part number and vendor please send me the model number

Apr 18, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

52 inch Vivitek rear projection dlp-hdtv


hi ferrari,

changing the bulb isnt going to help. the t.v. is just one big disaster so you might as well rip someone else off just like vivitek has done to all of us. if the new owners tell you theres a problem with the t.v. tell them they must have messed it up during transportation. Thats what vivtek told us. =D

Apr 06, 2009 | Vivitek V37655 56" DLP TV

1 Answer

My RCA 56 inch hdtv picture turns red, shakes then tv turns itself off. Bought brand new about eight months ago. Help please.


it should still be under warranty ,id check on the warranty info and see if they can repair the tv or yake it to a reputable repaiman to have it done.a normal warranty runs for a year from date of purchase

Aug 18, 2008 | Projection Televisions

1 Answer

Mitsubishi dlp does not get picture


the plug the connects underneath is not connecting right you have to get at the plug and seat it correctly

Dec 08, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...