Question about Radio Communications

1 Answer

Scanner problem I have a uniden BC72XLT scanner. I lived in Douglas Ga. and now I moved to Statesboro Ga. and I want to set up new frequices on my scanner to hear my future husband at work. I need to know how to set trunking and how to set the right frequinces on here

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 123 Answers

Check this link for user manual if you need it http://www.uniden.com/pdf/BC72XLTom.pdf
to heard trunking you should check if your scanner can handle this communications protocols.
to set frequencies, you should know wich band are they working, VHF, UHF, or 800, to start scanning.
Even they are in trunking, you will heard trunking channels but maybe just one side of the communications

Posted on Feb 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Listen i ned help bcs i cant pickup no other frequies butwhere i live


What do you mean "Where I live" It is a receiver. It can only get channels that are broadcast within range. Only internet apps can get areas that are not where you live because they use the internet to move the signals to where you live, or you can also use high powered ham radios.

Nov 16, 2013 | Uniden BC72XLT Handheld Scanner

1 Answer

I want to dump the old programs and reprogram new freqs. for the uniden bc72xlt


Your can RESET your scanner to erase all data that you've programmed into it and return it to its original factory settings.To do this:
1. Power the scanner OFF.
2. While holding in the 2, 9, and HOLD keys, power the scanner ON. The process takes about 3 seconds, and the word CLEAr will display.

For single channels, you can program "000.0000" into any one of them to clear its programmed data, or just program a new frequency into the channel. The new data will override the old information.

Need the factory operating manual for your scanner? You can download and print it, free of charge, here:
http://www.uniden.com/pdf/BC72XLTom.pdf

Bill B.
Listening in since the 60's

Nov 10, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

I have a Uniden BC72XL scanner and cats knocked it


In your manual, if you have one, if not look it up on the internet. There are ways with all these types of communications, to reset to manufacturer and factory settings at time of new purchase. Then proceed forward in programming.

Feb 15, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

Batteries run down in a little over half a day in my new uniden BC72XLT scanner, is it batteries, charger or scanner?


its most likely the scanner. i had one that used up batteries pretty quick. my advice would be to get rechargeables, and get 2 sets of batteries so when one set runs down you can put the fresh set in the scanner

Jan 13, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

Need help to get frequency on my new sccaner.


Try the internet, google "scanner frequencies in LA".

Jun 12, 2009 | Uniden BC72XLT Handheld Scanner

2 Answers

Looking for a BC72XLT handheld scanner manual


This link at the bottom should work. If not go directly to uniden's web site www.uniden.com and there is a place to get all their manuals

http://uniden.com/pdf/BC72XLTom.pdf

Mar 10, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

I HAVE A UNIDEN UBC73XLT


The BC72XLT is a USA model scanner, while the UBC73XLT is produced for Australia and New Zealand. The two are very similar, but not identical. There is a slight difference in frequency coverage (it's a bit wider on the UBC), the BC comes with a 110-volt AC power supply (wall-wart) for USA use, while the UBC comes with a 12-volt DC vehicle power supply.

FYI, here are links to the operating manuals for both models:

http://www.uniden.com/pdf/BC72XLTom.pdf

http://www.uniden.com.au/resources_main/pdfs/UBC73XLT_OM.pdf

Feb 16, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

Missing numbers


Press 'scan', then press 2, 6, 9 & 10.

Dec 20, 2008 | Uniden BC72XLT Handheld Scanner

1 Answer

Police 10 codes


Sent an e-mail your way,, Hope it helps,, Mechanic

Oct 26, 2008 | Uniden BC72XLT Handheld Scanner

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Brad Brown

Level 3 Expert

14742 Answers

Mike Charette

Level 3 Expert

1792 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...