Question about BellSouth GH5816 Cordless Phone

1 Answer

Periodic loss of signal

Bell South MH9915 loses signal since cable phone service was installed.

Posted by on

  • 1 more comment 
  • 7280 Feb 08, 2008

    Jersstuff,

    The signal goes in and out after the call is established. The cable service is Optimum TV/Online & Voice.

  • Jerry Peterson May 11, 2010

    Lets trouble shoot the problem. You will have to use a standard phone in the wall jack that your cordless assembly is now plugged into. Upon using the standard phone if the problem still occurres it has to be a line problem and not your phone being at fault, so you can have the local company repair it. If it only occures with the cordless device, then it's your problem and not caused by cable sevice installation.

  • Jerry Peterson May 11, 2010

    What kind of cable service was installed? When you say loses the signal, is this after a call is established or can't you draw dial tone? Thank you. Jer

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

If your talk level changes with a hardwired phone it can only be a problem caused by your service provider. Jer

Posted on Feb 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bell south all digioal answering machine model no 2006c setup outgoing message


Try Googling (bell south)(2006c)(manual) without parens to find out

Jan 06, 2017 | Lands Phones

2 Answers

Is there on-line manuals I can download for the Bell South CI-36 caller ID unit?


hi,
i recommend you to the website and download the manual.
thanks for using our website.

Jun 05, 2010 | BellSouth BELL SOUTH CI-36 Caller ID with...

1 Answer

Most of the channels breaking up despite auto retuning


could be one of a few things,
low signal strength, aerial out of line with transmitter.
bad coax connections losing signal strength.
coax broken inside, or old and not low loss.
Get the aerial checked for direction, half a degree out of line over a few miles and you will lose a lot of signal strength, as will old coax (aerial cable) and if you are using an unshielded coax you could be losing signal strength through the cable itself. Replace the connecters and try to use a straight run of cable instead of having joins in it as these joins, even if using connecters, will cause a weak signal. If yiu are running more than one tv off your aerial, invest in a booster.

Feb 06, 2010 | LG 32LG30 32 in. LCD HDTV

1 Answer

Model #mh9915. when redialing phone dials 1 before number. how to change this.


have bell south model #mh9918. can't press the numbers down to connect. don't get dial tone because button seems stuck

Dec 06, 2009 | BellSouth GH5816 Cordless Phone

1 Answer

Bell south internet


Sounds like a dial out problem. Talk with your local telphone service and try getting a service call to check your line.

Sep 08, 2008 | Westell Wirespeed LiteLine 6100...

1 Answer

Loss of signal alarm


Go to settings, then scroll to network and turn the service tone, Network jingle off call drop tone OFF
Hope this helps

Jul 19, 2008 | Motorola Mobility RAZR V3

1 Answer

Bell South Telephone Manual, Model 222 (20 Memory)


I have this phone...once I find the instruction book I can help you if you still need it.

Feb 28, 2008 | BellSouth Lands Phones

1 Answer

People calling us are getting a message saying that their phone is blocked. They can't even get through to our voice mail. We called from our cell phone and got the same message. Can't find any way to talk...


Bell South, or AT&T, has a feature called Anonymous Call Rejection. If someone blocks delivery of their Name, Number or Both. To turn it on is *77 and to turn it off is *87

Feb 11, 2008 | Lands Phones

1 Answer

Lose signal


While some loss is expected. You can change channels. 1-6-11 are the best for cutting signal loss because they do not overlap.. 2.4GHz device in operation, like a cordless phone or microwave oven can cause signal loss. Metal in walls, electrical devices and wires can also cause loss.

Jan 03, 2008 | Linksys WPC54G Wireless-G Notebook Adapter...

2 Answers

Set up auto dial on Bell South telephone 840V


"Store", "Tele NR", "Auto Nr", "Save"

Oct 14, 2007 | Lands Phones

Not finding what you are looking for?
BellSouth GH5816 Cordless Phone Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top BellSouth Lands Phones Experts

Cindy Wells

Level 3 Expert

4804 Answers

kakima

Level 3 Expert

98796 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a BellSouth Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...