Sunbeam heating pad no longer heats. The red light on high temperature just blinks and I can't click any other temperature. It's not that old. The heating pad model is CAT93, Controller model SW114. Thanks for any help you can give me.
407 people viewed this problem
This solution has been voted best by the Fixya Commnunity
I had same issue w/ red blinking light on my Sunbeam controller SW114, pad CAT93. Was about to toss away but then got it to work perfectly by doing this:1. With unit UNplugged, press & hold the single grey controller button2. While pressing the controller button, plug the unit inUnit will power up in the 'warm' (green light) setting; pressing the controller button will cycle you thru the others modes.
Throw away and purchase new one
I have a very old thermastat and the cover isn't there anymore. The problem is about 1 month ago the furnace was turned...
msbryant613there is no heat in the house I turn the fan on ''ON'' and it is just cold air. the flame turns off and on off and on...
jason_roe200The supplied told me that the white wire on the new motor was the same circuit as my OE black wire. According to my...
Richard ConstantineauMy Acurite 00590W has worked fine until I changed batteries in the external LSCW091X device. Now it dosen't register...
prove_1i have a sunbeam instant steam cooker and i lost the instruction manual on how to use it..is there a way to get another...
drladdie
It is giving me error code E000 on a Image runner 210S. I tried powerng off and unplugging it. It is not doing...
Letty Webber
I had a flood in my cellar and the water was about half way up the electronics and compressor. The circuit tripped,...
Cory Hanks
Loading... 
Kevin Sibley I have a CAT93 heating pad with a SW104 controller that does the same thing. Have not found a solution yet, besides throwing it away and purchasing a new one as has been suggested.
Feb 19, 2012