Question about Heating & Cooling

2 Answers

Flashing re co

My hunter thermostat is flashing re co what is this and why?

Posted by on

  • 1 more comment 
  • Anonymous Feb 09, 2008

    my Hunter 44260 Programmable Thermostat is blinking CO what does that mean? ?

  • waggoner Feb 14, 2008

    Our system flashing Re Co also, what does this mean. Temperature in home is not regulating well.

  • Anonymous Feb 23, 2008



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Re Co stands for Recovery Mode. That means if you have programed your thermostat to be at say 72° at 5:00 then it should kick on in Recovery Mode several minutes before 5 in order to reach that temperature. This is normal and doesn't indicate that something is wrong, just that your thermostat is trying to reach or recover the programed temperature.

Posted on Feb 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your hunter thermostatis flashing re co.
can I get information about ur thermostat's warrenty

Posted on Feb 08, 2008

2 Suggested Answers

  • 52 Answers

SOURCE: Hunter 44360 thermostat

The message means the tstat was in recovery mode, I would suggest just disabling this function to prevent it in the future. Remove the tstat from its base and look on the back there will be a recovery switch just slide it to the other setting to disable the feature

Posted on Jan 29, 2008

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hunter model 4409. How can I reset?

Reset hunter model 4409 - Fixya
34 mins ago - reset hunter model 4409 - Hunter Set and Save Programmable question. ... Clicking this will make more experts see the question and we will ...

Controller Frequently Asked Questions ' Hunter Industries

Hunter IndustriesWhen the station or stations finish watering the controller will go back to ... How do I reset my Hunter controller · How do I address the Wireless Solar Sync sensor ...

CodeLink®, Steering Angle Sensor Reset Tool, Wheel ...
Hunter Engineering Company's CodeLink® steering angle sensor reset tool plugs into a vehicle's OBD-II port.

Feb 03, 2016 | Heating & Cooling

1 Answer

Help! I can't change the temperature and the system won't turn on. All solutions are appreciated. Please include details.

The first thing to determine is if in fact the problem is in the thermostat or if the problem is in the furnace. The furnace typically provides the power source for the HVAC control system and if nothing is wanting to come on, the power to the furnace could be interrupted. Verify that condition first.

Remember most programmable thermostats have a built-in time delay possibly as much as 5 minutes and that is a long time to wait without pressing or touching another thermostat function.

Apr 25, 2015 | Hunter 44860 7-Day Programmable Touch...

2 Answers

How do i change from farenheight to centergade

Get the thermostat manual and look for either a hardware switch on the circuit board for this or a button setting that can be done from the front panel.

Nov 02, 2014 | Heating & Cooling

1 Answer

The fault symbol is flashing and the red light is on, how do I determine the fault and how to reset after fault is found?

You can get an operators manual on Robertshaw's web site. The fault could be that it's too co;d outside for the heat pump to be efficient. Once you get the manual you'll be able to find out exactly what's wrong.

Mar 26, 2014 | Robertshaw 300-208 digital...

1 Answer

Underfloor heating wont stop running

Look for a stuck relay that controls the pump

Dec 30, 2013 | Hunter Mechanical Heat & Cool Thermostat...

2 Answers

Can digital thermostats cause problem with carbon monixde levels in home? three zones, three new thermostats installed, 2 days later house full with carbon monoxide

There would be virtually no correlation between thermostats and CO. Anything that has happened would be purely coincidental. All the thermostats do is tell the heating to come on or off. If you have a CO problem then there is a major problem with heting plant. You need to find first the source of the co and then the reason why you are making co in great enough quanities to be a problem and how it is getting into the heated space.
My thought is... why did you change the t-stats in the first place??? was there an issue that caused the change and then to CO problem which was happening or going to happen anyway??


Jan 25, 2010 | Honeywell Programmable Thermostat Heater

1 Answer

Bought 44155c hunter thermostat air won't turn on.

If unit worked before you tryed changing t-stat then its possible the t-stat wires are shorting each other out.take t-stat back off cut back wires a good 6 to 10 inches or if you dont have that much wire to play with just cut back as far as you can and make sure there is no bare wire touching each other ,then just to test unit to make sure its working ok twist yell.,red,green together this should bring both units on and should blow cold.if this works up to this point on the new stat read directions closely there might be a jumper wire in the stat that needs connected usually from y1 to w1 you would install a jumper wire .see if this helps if not write back i have 1 other solution.i hope this helps

Sep 14, 2009 | Honeywell Programmable Thermostat Heater

1 Answer

Trouble Installing Hunter Brand Thermostat

on the back of the packaging for the HUNTER MODEL 44155C it states that it is not compatible with heat pumps

Mar 01, 2009 | Honeywell Programmable Thermostat Heater

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

9,577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts


Level 3 Expert

2035 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cris Sparks
Cris Sparks

Level 2 Expert

338 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides