Question about Canon PowerShot A510 Digital Camera

1 Answer

Canon digital camera power shot A510

Cammera dropped on floor...Error: E18

Posted by on

  • BROKEN CANON Mar 10, 2008

    MY 2YR OLD GOT A HOLD OF MY A510 & THREW IT AGAINST THE WALL NOW IT WILL POWER UP AS FAR AS THE GREEN LIGHT IS LITE , I CAN HEAR SOMETHING HUMMING IN IT & AFTER A MIN UITE OR SO IT WILL BEEP ,BUT THE LENSE WONT COME OUT & THE LED DISPLAY WILL NOT COME ON TO REVIEW THE SHOTS.

    IVE TRYED

    ALL THE STEPS LISTED & NOTHING IS WORKING ON IT

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.

Here's some things that you can do to try to correct it. They only seem to work for about 50% of lens errors, but they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Posted on Feb 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon PowerShot A510 error code E18. What does it mean?


Canon E18 error happens when the lens gets stuck while trying to extend. The problem usually happens because dirt or sand get into the lens mechanism. If your camera is still under warranty, the best thing you can do is to take it to the nearest official Canon repair shop and Canon should fix it for free.

Jul 11, 2011 | Canon Digital Cameras

1 Answer

Power shot SD20 digital camera When the on switch is depressed a short musical tone plays and then it stops after about 5 seconds and E18 appears on the screen momentarily before the camera turns off.


E18 is the standard Canon lens error. The lens gets stuck when extending. If you did not drop it and there are no signs of damage you can check with Canon and try to get the camera repaired under warranty.

If it is not covered here are a few methods to try on your own, at your own risk.
http://www.e18error.com/repair.html

Good Luck,
-WN

Dec 16, 2009 | Digital Cameras

1 Answer

MY CANON POWER SHOT A 80 DONT WORK


Lens errors (E18 errors on Canons) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

May 26, 2009 | Canon Digital Cameras

1 Answer

My Canon Power Shot S2 1S will not take pictures because the lens will not go back in or out. The screen is black unless I review recent pictures


Do you get an E18 error? If so, then the lens motor is bad, or you have contamination in the gears (sand, dirt, etc), or mechanical failure from dropping the camera. This will require repair by Canon or other camera repair services.

Jan 17, 2009 | Canon PowerShot S2 IS Digital Camera

3 Answers

Canon A510 As webcamera


can i use canon power shot a510 how web camera??

Sep 15, 2008 | Canon PowerShot A510 Digital Camera

1 Answer

After E18 fixes...lense got in..but does not come out


You can just head to darntoothysam.com and search for "E:18" without the quotes. You won't see your model listed, but you can buy any one of those model repairs and follow the steps to get your A510 fixed.

Feb 26, 2008 | Canon PowerShot A510 Digital Camera

1 Answer

Cannon power shot a70


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.
Here's some things that you can do to try to correct it. Have already fixed several cameras with this problem by using these methods:
http://www.e18error.com/repair.html

Nov 24, 2007 | Canon PowerShot A70 Digital Camera

1 Answer

Canon Powershot A510...


The a70 drops a screw in to the mechanism.

you will need to take the unit apart carefully as it is intricate.

I used a web site to show me but have lost the link.

try looking for cannon A70 problems / erors Etc.

Oct 15, 2007 | Canon PowerShot A510 Digital Camera

Not finding what you are looking for?
Canon PowerShot A510 Digital Camera Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...