Question about Elna Heirloom Edition 6005

2 Answers

Motor drive grommet (black rubber)

Need to purchase and replace the rubber grommet on the motor drive shaft. Old grommet is damaged beyond repair.  I can replace just need to purchase one.

Posted by on

  • rogern270 Feb 08, 2008

    Thanks- a good beginning if I cannot purchase the "real mcCoy".



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers


Have you tried getting in touch with the manufacturer or any of their dealers?
Should you need -
Elna International Corp. SA
motor drive grommet (black rubber) - icon_mail.gif Ch. du Champ-des-Filles 19
1228 Plan-les-Ouates
icon_mobile.gif +41 22 884 86 66 icon_mail_back.gif

You can also try getting in touch with dealers or country representative here.

Hope that this be of some help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Posted on Feb 08, 2008

  • Louie  Role
    Louie Role Feb 08, 2008

    Glad to be of assistance and appreciate the rating.


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 5 achievements.


    An expert who has achieved Level 3.


    An expert that has over 500 points.

  • Master
  • 440 Answers

Try auto parts store for ruber rings what size is it whats it look like can u take pic

Posted on Feb 08, 2008

  • nick helpap
    nick helpap Feb 08, 2008

    yes they have all kinds stuff like taht and home depot depending on size ya not orginal part but may be better thats nice machine tho u have



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My bobbin winder was working but now it wont start winding have a 1950s model no ah766517 singer

Will it start if you give it a push?
If the motor has brushes then when these wear they have intermittent contact with the spinning shaft of the motor. I would expect it's an easy and inexpensive job to replace them. If the motor works OK then a belt or something has come off.

Oct 21, 2017 | Singer Sewing Machines

2 Answers

Where would i get a zipper foot for 40 year old janome sewing machine

fortunately manufacturers take a long time to change walking feet so go to a janome sewing machine repair shop and they may have one that covers a range of years

Oct 11, 2016 | Janome Sewing Machines

1 Answer

Brother E2000 sewing machine, bobbin winder not working. took back off machine, found a "gooey" black substance on the winder shaft, removed and replaced with a "O Rubber Ring", still not working, tri

Gooey black substance was lubricant or grease. Can you really fix this yourself? Let the professionals make the repairs. These companies won't sell parts to you on a retail level. Un Certified repairs can make the machine unsafe to use. Please let a Professional repair the machine.

Happy New Year,
Embroidery Services
San Diego, CA

Dec 19, 2014 | Brother Sewing Machines

2 Answers

My model 120 Husqvarna Viking sewing machine will not start sewing with vigor. It lugs through the first two minutes of stitching with virtually no power then very gradually picks up speed. How do I fix...

Repair manuals are available only to Husqvarna Viking authorized dealers. However, I have seen some on ebay from time to time. Sounds like your problem could be several things - binding of the internal drive shaft which may have a build up of grease and lint which unbinds as you sew, could be a faulty motor, or faulty transformer. Suggest that it be serviced and cleaned by an authorized Husqvarna Viking Dealer. You can find the nearest dealer by click on the "Dealer" link at

Good luck.

Jan 25, 2010 | Husqvarna Viking 1

2 Answers

Model 158.1786080: bobbin rewind will not rotate. Rubber on drive wheel seems to be worn below size limits.??

i think you have solved your one "Q" and your right .. the wheel is warren out or the rubber is gon hard and will not pick the drive . some models have just the rubber ( wheel ) as a replacement . an other will have to relaplace the inner (drum) and rubber as assmbl..

Jan 15, 2010 | Sewing Machines

1 Answer

Singer Tiny Serger: Motor runs but machine

pull the 4 bottom rubber feet out and remove screws hidden in holes. Lift main body of serger up. you will see the gears. Probably drive gear on motor shaft got hot and slid on motor shaft.

Dec 10, 2009 | Singer Tiny Serger TS380

1 Answer

Necchi PL1036. Needle bar worked loose and slid down shaft. Right looper struck it and probably bent. After trial and error adjustments, threads will not loop. right looper thread breaks. How to align ?...

Oh dear..... Bent looper and needle arm loose... Take this to be repaired before you damage the other looper as well and it costs twice as much. Expect looper to be in range of $65 plus service, as a ballpark. There are many variables with overlocker timing and it is beyond the scope of either this forum or the novice to correct the problem I am afraid.

Sep 07, 2009 | Sewing Machines

1 Answer

My wife's mother had an old New Home Sewing machine. Instead of a belt drive off the motor this machine has a slip on rubber wheel about an inch in diameter that is spring loaded and presses against the...

I have these in stock. you'll need to give me the diameter of the rubber wheel as there are three different sizes. These run $5 +s/h. Stepping Stones Quilts

Jun 11, 2009 | New Home L-373 Mechanical Sewing Machine

1 Answer

Singer Athena Rubber Washer replacement

This is a shaft washer designed to cushion the left right movement of the main shaft Lift the right side of the black top and slide it to the right and it will come off.

If you look closeley you will see a collar on the main shaft with 2 set screws ,this washer goes between the collar and the machine side . We use a delrin washer and cut out app 30degrees of this washer which will allow you to snap it over the shaft ,I hope this helps these were great machines

Nov 17, 2008 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

194 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides