A jammed DVD will not eject. Message"Repairing" goes on and on and nothing happens.How can I reject the dvd?

try different dvd if the problem is not resolve, try to get a disc cleaner to clean the head that might be dirty.

Hi,

Try pressing repeatedly the eject button while you turn on the unit. If this doesn't work then it is a mechanically problem in your player.You need to be manually open to take out the dvd.The rubber thread which should be connected to the motor inside the DVD player might have moved from its place.
You need to place the rubber thread to proper place.

Furthermore, if the belt is slipping, the mechanism never gets the "drawer closed" signal, and the disk will not spin.

After a DVD player has been used for awhile, another common problem is that the laser in the DVD player becomes misaligned, inhibiting its ability to read DVDs. So it indicates the defective laser motor. The only way to fix this problem is to bring the unit to a service center for repair.

Hope this helps.

Please feel free to ask us if you have any further queries.

Shane

Nothing is happening because the firmware can't recover/repair the error. Yes, you must take your unit to a dealer, this is a hardware fault and the faulty part must be replaced.

You might have to open it up (assuming it's a desktop, not laptop) and make sure the cable is connected inside. The power might be connected, which lets you insert and eject discs, but the IDE (assuming it's IDE) cable also needs to be connected.

if you want to just get the disc out there should be a tiny hole on the front of the drive where you can insert a paper clip firmly to eject the drive.

I would also check the rubber band / cogs by taking a look inside and see if there are any issues.

Also if you reboot do you get the same problem ?

your ganna have to buy a dvd player lense cleaner disk you can get them from wal-mart or online for cheaper but it sounds like the lasers lense is dirty

how do you copy vhs to dvd on this machine?

if the cd or dvd was scratched very much this may happen

I started loosing the screws and it started working after I shook it. No real technical explanation as to why it happened. Maybe a bad dvd rental?

By pressing the Power button for >10 seconds you can force the unit to turn off. Immediately as the unit does, press the disk eject button and the defective DVD can be removed. Don't put it back in, or the problem may repeat!