Question about Trendware TPL-111BR Wireless Router (TPL111BR)

1 Answer

Tpl-111br not working - all lights glowing on it

All lights [lan1, wan, act/col....] are glowing as soon as i connect power
but the router is not working

pls advice asap

Posted by on

  • Anonymous Feb 08, 2008

    HELLO

    I TRIED HITTING THE RESET BUTTON AT THE BACK....but it seems to be useless [not sensing at all] or nor reseting .....I can see all the lights glowing except [ACT]...pls advice



    Thanks again.

  • proach1995 Sep 18, 2008

    TrendNet- model TPL 111-br

    All led's green stay lit when powered up. Reset has no effect. Any ideas?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers

Try hitting reset button on back cheak ip aderes and ect

Posted on Feb 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a smartrg wireless router I disconnected from all cables, relocated and hook it back up and now I have my power lite whan light my dsl and Internet light are not on and I can't connet Internet


Ensure that you have the cable from your DSL modem connected to the DSL (WAN) connector port on the rear of the modem. Also ensure that your dsl modem is connected to the phone line. If your modem is a model SR-350NE and it does not have a port labeled WAN on the rear, you must connect the dsl modem to the LAN1 port.

Here is a link that may help you.


http://www.lmi.net/wp-content/uploads/SmartRG350N.pdf

Nov 13, 2015 | Computers & Internet

1 Answer

Wt8951nd


Power cord
RJ-11 telephone cable coming from a splitter or the extn. line of your landline phone.
Ethernet cable coming from your Desktop/Laptop connecting RJ-45 port
Most standard ADSL modems have four/five lights in the front :
Power light to indicate electric power to the modem.
ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green.
LAN light will glow steady green when the modem detects a successful link to a computer or router ethernet port.
ACT i.c. Activity light glows when the modem is sending and/or receiving data on the lan and wan. It will vary between very slow to fast flashing and steady green to indicate lan/wan traffic.


for more help visit CBR Tech Solutions

Feb 08, 2014 | Computers & Internet

1 Answer

Linksys router not recognize internet


Make sure your router's WAN port is set to dynamic IP. If the light on the front doesn't glow/blink for the WAN port, try a different cable. If a different cable doesn't work it's probably toast. :( This problem appears to be directly linked to the relationship between the WAN port and the modem. Given that the devices can connect to the router, but not internet, it has to be the WAN. Sometimes if the modem goes out it will send too much voltage through to the router and fry the WAN. Had that happen to my parents router. If the above doesn't "fix ya" then try a different router.

Worst case, you might have to put a wireless card in your PC and bridge the modem (wired connection) to the wireless card and broadcast for your wireless devices. At least until you get a new router.

Aug 02, 2013 | Dell Computers & Internet

1 Answer

How can i connect linksys WRT120N router to my laptop using dsl


from dsl connection put connector to WAN slot,then connect lan1 to your pc

Feb 13, 2011 | Linksys WRT120N Router

1 Answer

Two router dosnt connect with wireless


ISP cable connect to 1st router's DSL or WAN port then 1st router's LAN1 connect to 2nd router's DSL or WAN port through Ethernet cable.

Apr 05, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

How do I hook up my ENHWI-N router? I took the cable that goes to the PC and attached that to the WAN and then another cable and attached that to LAN1 and the other end to the computer but what else do I...


ok, WAN goes to your internet connection. LAN goes to the computer to access. If it is the usual default, you might get a DHCP address like 192.168.1.2. In your browser, type http://192.168.1.1 and see if anything comes up.

Jul 07, 2009 | Encore ENHWI-N Router

2 Answers

No connection


Is your physical connection right???
the WAN port should be connected to your modem, and the LAN1 should be connected to your pc.....

if right, but still doesn't connect....
check if the lights of your router is working
the POWER should have a solid light,
the STATUS, WAN, LAN 0r WLAN should be blinking...

if right, but still doesn't connect....
What kind of connection do you have?
is your modem automatically detects your password...?
or you manually type your password to connect to the internet...?

Jan 17, 2008 | D-Link DI-704P Router

1 Answer

DGL-4300 resets every few seconds


Try the following:
1. Hook up your router like you want it to be
2. After the WAN/Wireless lights turn off we want to HARDRESET your router.
3. There will be a small hole that requires a pen or paper clip to press...Hold this down for about 15 seconds, or untill the power light flashes on your router.

This might take care of it.

let me know.

Jan 10, 2008 | D-Link GamerLounge DGL-4300 Router...

1 Answer

Problem after firmware update Edimax BR-6114Wg


Hi Fklco,

Why are you connecting the WAN,, (the internet modem cable), to the standard ports? It should have a WAN port, for the cable from the modem, and a LAN for the cables to the computer?

On the other hand, if it is working, I would leave well enough alone, :D

Jan 06, 2008 | Edimax BR-6114Wg Router (BR6114WG)

Not finding what you are looking for?
Trendware TPL-111BR Wireless Router (TPL111BR) Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98694 Answers

Are you a Trendware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...