Re: Need to obtain a diver for making it worked and do...
Several possible solutions - first make sure you boot up with the iPod not plugged in and then plug it in...if you're already doing this
1. If you're using the USB on the front of a computer it may be a low current/speed USB and you should try the USB on the back of your computer.
2. Try unplugging other USB devices from your computer and then plugging the iPod.
3. Open iTunes and try to slowly place the iPod on and off the computer. If it is mounted go to your system tray in the bottom right and right click eject disk before unplugging it each time. Repeat and try to have the computer pick up the drive.
4. The drivers should be on your windows xp machine. If you have disk use repair ....but they are probably on your machine already.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
how old is your computer if your computer is asking for a driver when you insert the windows 7 disc your motherboard might not support windows 7 if its older than 5-6 yrs also you need a minimum of 2 GB of ram to support windows 7 hope this helps you
try with some bootable DVD if it works that mean your diver is ok if not than you try to clean the lense of the drive with DVD lense cleaner, still if it doesn't work than you may need to change your drive.
i got digi 001 running on windows 7...
i left my xp on hard disk while installing win 7. it kept xp on folder windows.old folder. in control panel i saw digi as multimedia adapter wich system couldn't recognice. hit "change settings" -> driver -> update driver
used my old windows to search for driver. it found "Dalvin.sys" driver for adapter. installed that. after that windows recogniced digi 001.
downloaded "digidesign asio 6.11" driver installer for win-xp and ran it.
and bingo - it works!
in every step windows was complaining and asking do i want to do this. just yeah'd everything. as i just had a clean install of win 7 i just thought whatta heck i can install everything again if it would not work, but it did.
so in a nut shell:
1: install Dalvin.sys in control panel for digi 001
2: run digidesign asio 6.11 driver installer for win-xp
for me it worked but i absolutely take no responsibility if you mess your system with this! at least reaper got a sound out of it. i haven't tried to record anything yet. but asio settings seemed to work as they used to do in xp.
Put all these files in one folder and when windows ask for the drivers, select the option to manually serach for the drivers. And point the search to the folder where you saved these files and it should fix the problem. If this does'nt work, please let me know.
checked my XP via control panel:
good luck...may be difficult to force drivers...when system asks to install software, insert the original XP cd. The driver did not change with SP2, as far as I know.