Question about Sony FD Trinitron WEGA KD-36FS130 36" TV

1 Answer

Power on problem

Our t.v. doesn't turn on. Tried unplugging and all the other suggestions...nothing is working

Posted by on

  • 2 more comments 
  • sbosw Feb 09, 2008

    Sony FD Trinitron WEGA KD-36FS130 36" TV was working today, then went off. There is absolutely no power to the set, and no blinking lights. No problem with plug or breaker, unable to reset by unplugging. Cannot turn on using remote or TV power button, and cannot turn on by using service code. Suggestions?

  • sbosw Feb 15, 2008

    Update to Comment by sbosw, posted on Feb 09, 2008Sony
    FD Trinitron WEGA KD-36FS130 36" TV was working today, then went off.
    There is absolutely no power to the set, and no blinking lights. No
    problem with plug or breaker, unable to reset by unplugging. Cannot
    turn on using remote or TV power button, and cannot turn on by using
    service code. Suggestions?
    As of 2/15: Still experiencing the same problem, but now I can turn it on after waiting several hours or using the service code. However, if I turn it off to get the diagnostic info off the screen, I cannot turn it back on. Help!

  • shamsky Apr 16, 2008

    TV will work ok for several hours. When I try to turn it back on it will not turn on. Wait for several hours then it will turn on normally. Anytime it is turned off it will not turn on again unless at least SOME time goes by where it is allowed to sit. Can not get it to turn back on when needed.

  • drjuanra Jul 22, 2008

    yes

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Sony Master
  • 1,635 Answers

It is very common in this set to have a power supply and or scan failure to cause the effect that you are seeing.

A TV service tech with experience on Sony sets should be able to service this for you.

Jerry G.

Posted on Apr 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen is black, no picture or audio


Give me a model number so I can at least make an informed guess or suggestions.

Dec 14, 2012 | RCA Standard (CRT) Televisions

3 Answers

Sound quit working


Unplug power cord from outlet for 20 minutes , then plug back, this will reset tv

Mar 28, 2008 | Philips 14MS2331 14" TV

1 Answer

My Samsung 20" CRT model # TX-P2036 has power


May be you should press the channel button on the set itself or there is a problem with the eeprom of the set circuit.

Jun 15, 2011 | Samsung TXP2036 20" TV

1 Answer

I ve got a sharp aqueos tv i turned oevr channels


Try this: unplug the power cord from the wall, let TV set stand for AT LEAST 30 minutes, then plug back in and and see if the TV operates as normal.
Sometimes this works and sometimes it doesn't.
Good luck !

Jan 09, 2010 | Sharp 25N-M100 25" TV

1 Answer

Panasonic Problem


replace the fuse of the tv device (in the primary main power section),or contact the nearest repair shop.

Jul 18, 2008 | Standard (CRT) Televisions

1 Answer

Suddenly went off!


This is a power supply issue. Probably in the high voltage stages. Maybe a fuse, regulator IC, or Horiz. Output transistor or all of them. If you don't know anything about TV repair, you should take it to a shop that will provide an estimate to you.

Geno

Mar 04, 2008 | Standard (CRT) Televisions

1 Answer

Blank screen, no sound


If ti blinks three times, then it may be an issue with the flyback transformer. It's called "three strikes"...it tries three times to come on, and after that enters a safety shutdown mode to protect the TV. Might need to have a professional shop take a look at it.

May 02, 2007 | Durabrand DWT1905 TV

1 Answer

Sony 27" XBR failure


I will suggest dont ise it until someone who is qualified comes over to give you an estimate,I belive you have a lot of loose conections in the horizontal driver and output circuits,power supply and crt board.Should not be expensive to repair right now. Good luck.

Sep 18, 2006 | Sony KV-27V42 27" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KD-36FS130 36" TV Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...