Question about Audio Players & Recorders

1 Answer

Viewsat ultra 2000

Only 4 dashes on panel nothing else can you help me?

downloading new fix through USB port and everything frozed. Tried turning machine off for a couple of minutes and back on again, and all I could get was four small dashes . haven't been able to get anything else since.This problem has been for three weeks now.noticed that the S/PDIF on back of machine lights up for a second when machine is turned on but goes back off imediately,compared this with a friends machine which is working perfectly fine and his light stays on.Could this be part of the problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,270 Answers

I would suggest to try to use the NULL cable and do the following:
1.Load VSULTRA_v117_factory_bin.pgm
2 Load DBPSW-061127U_A.PGM
3 Load the latest xxxxxx-xxxxxxU pgm file.

You will know where to find those programs.
Good Luck.

Posted on Feb 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsat ultra has no power


try factory deafult & reload the file 080814

Aug 18, 2008 | Audio Players & Recorders

1 Answer

Viewsat ultra


can you still get into the user settings?

try doing a factory reset

Dec 16, 2007 | Audio Players & Recorders

3 Answers

Code viewsat ultra 2000


zero that's allit shows teied null cable eont load.

May 06, 2008 | Audio Players & Recorders

1 Answer

VS- FTA


For the Viewsat Extreme we re-loaded the newest fix, and voila all problems were corrected. Can use front panel, and remote works geat.

Apr 25, 2008 | Audio Players & Recorders

1 Answer

Viewsat with boot message


I had the same problem some months ago, you must re-boot your viewsat using a null modem cable.

1.- firsth you need the factory bin and install it using the loader 2 (if you don´t know how to install the factory bin there are in the web a lot of web pages which show how to make this process)

2.- once you have installed the factory bin, you must install the last viewsat bin.

of this way i solved this problem i hope you can do it too

Mar 05, 2008 | Audio Players & Recorders

1 Answer

Ultra viewsat box vs2000 froze


change the file make sure you check the mane of thefile

Jan 10, 2008 | Audio Players & Recorders

1 Answer

New fix for Viewsat xt 2000?


You need to search for FTA sites

Dec 18, 2007 | Audio Players & Recorders

7 Answers

Fta viewsat extreme dead.


Hi,
I am using viewsat extreme 2000. After downloading the new program PC-STB. Front panel power has gone. Only rear light on. All view has gone.
Would you please send me by email, how can I solve this problem? I shall be grateful if you please reply.
Thank you.
-Rajesh
rkb@295.ca

Dec 11, 2007 | Audio Players & Recorders

5 Answers

Viewsat ultra reciever has no power/lights etc.


OK I did my research. Apparently there is a little chip inside the receiver that has burnt. We need to take our receiver the the people who know how to fix them and replace the chip with a new one. It might take time as from what I hear it could be any chip? Hope this helps

Dec 08, 2007 | Audio Players & Recorders

4 Answers

Viewsat ultra 2000 fta sat. receiver


I have sat ultra 2000 have some file store in my disk when I download to receiver by mistake I klick the file fix. I put the power off and remove my cable put the power on I have some problem that Receiver constantly on and off and I try to download the file I can't because the power does not stay and there is no line or 0 digit please help me
Thx
Robin

Nov 26, 2007 | Sirius Satellite Radio Sirius SIR-ALP1...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100174 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

70983 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...