- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, problem can be solved. What causes the keypad will light up for a few seconds then turns off, is because the keypad has a separate function from the phone. (it has a removable keypad). And the keypad inside the cell phone is getting Bad and it needs to be replaced.
You can know how to disassemble the cell phone through the link below:
When you replace the keypad,phone will be ok again.
If you are professonaly not traind for mobile repairing then its risky. At first open the screw by screw driver and open it vary carefully step by step. It is better to go at nearest MOTOROLA service center. Thank you for visit.
Ok , you will need a new keypad , these you can find on ebay if you search " replacement keypad for motorola slvr " these will cost you about 3 pound , and then to fit it you will need a set of torx screwdrivers remove the screws and then if you pull the front of the phone of it shud come off with ease and then you will see the old keypad and just swap it with your new replacement 1 , hope i helped .