Question about DVD & Blu-Ray Players

1 Answer

A sony dvp s360

When i put a dvd in the player the player won't play. the display shows the following C: 1300 PER THE MANUAL THE DVD IS DIRTY AND NEEDS TO BE CLEANED. I CLEANED IT AND ALSO PUT IN A NEW DVD & I GET THE SAME C: 1300. WHAT CAN I DO?

THANK YOU

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Your problem is a common one, it is not your changing the setting that has caused your player to fail. c 1300 failure is quite common and is caused by a weak pickup assy. after changing your setting it has just turned up the power and caused the already weak pickup to fail.
a new picjup assy cost about 55 dollars and laboe is about 50 dollars to install it ..Not really cost efective to repair...todays DVD players do so much more than the 360. so i would say by a new one. good luck
please mark the post with a fixya!

Posted on Feb 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my sony DVP display "No Disc" for every disc; when they play fine in any other player?


Sony tend to have a notorious disc lasers... couple of things you might want to try..

1. clean the lens using a standard Lens cleaning CD.
2. Try playing a CD (music) instead of DVD (if this works...it is likely that the lens is not reading DVD)

N

Jun 02, 2014 | Sony Dvp-C660 Component Dvd Players

Tip

Sony DVP-NS725P Region free code.


This region free hack also works for the DVP-NS725P using the original remote control. If the first one fail try the second one, it works like a charm.
Thanks a lot....

SONY DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D

Multi-Region:

Turn On the unit with the remote controller
Wait until "no disc" appears in the unit's display
Press Pause, 3, 1, 4, 1, 5, 9
The word "CODE" should appear in the display
Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on
Again, within 5 seconds, press Pause and Power
If the above fails to work then you may wish to try the following:

Put the player into Standby mode
Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings
Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off
Press Audio and Return for auto-switching On
Press Angle and Return for MacroVision On
Press Subtitle and Return for MacroVision Off

on Mar 07, 2010 | DVD & Blu-Ray Players

1 Answer

My dvd player won't play dvd


likely if cannot read disc, or no disc or error, that unit has either dirty or bad optical pickup.

May 14, 2012 | DVD & Blu-Ray Players

1 Answer

Sony portable DVD player dvp-fx970 won't play dvd


Use lens cleaner TDK or wash dvd disks with hot tap water then block off the water drops.

Feb 08, 2012 | Sony DVD & Blu-Ray Players

1 Answer

How do I unlock my Sony DVP - NS330 player, bought


Codes for-
Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, Sony DVP-S530D, Sony DVP-S535D, Sony DVP-S536D, Sony DVP-S725D, Sony DVP-S735D
Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.
Yours is not listed but these may be worth a go.
or try http://www.haldigital.com/hp/dvd.htm

May 15, 2010 | Sony DVP-NS330 DVD Player

1 Answer

Dvd only playing in black and white


Make sure that you connect all of these connections to the right colored cables.
807da98.jpg

It seems like you only have the green cable connected. Go back and connect the red and blue for both the tv and dvd.

Aug 06, 2008 | Sony DVP-S500D DVD Player

8 Answers

Sony DVP-NS57P all region


Try this,
1) Plug the DVD Power Cord to the wall jack, but DO NOT Turn On the player;
2) With the Remote Control, press: Display, Top Menu, Clear and Power;
3) It will enter in the Service Mode;
4) Choose option 2 and then 4;
5) It will ask for an Input Code and Current Code (its 5 spaces), press 1245 and then Zero;
6) Leave all Zero erasing 1245, and on the bottom field all Zero too, then press Enter;
7) So the DVD Display will show a Zero (all Region-Free),     then press Power to Turn Off.

Nov 18, 2007 | Sony DVP-NS57P

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96738 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...