Question about Toshiba 61H71 61" Rear Projection Television

1 Answer

Toshiba 61' cinema series rear projector

After pressing the power button on the red power led comes on steady for approximately 3 seconds and then it starts to blink but the TV doesn't come on. Is this a power supply problem?? Any help would be appreciated.

Posted by on

  • toshi61 Feb 08, 2008

    The problem was a burnt out high voltage transistor. Thanks for your input.

  • toshi61 Feb 11, 2008

    Thanks for the follow-up

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Check for loose connections and or bad convergence amp ic's
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929

good luck
please mark the post with a fixya!

Posted on Feb 07, 2008

  • Cary Farah
    Cary Farah Feb 11, 2008

    if that high voltage transistor. burns out again you will need to replace the transformer.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Sony KP 61V90 61 inch rear projection TV has steady red power/standby light and thus is getting power, but doesn't fully turn on. I've read that this may be a fuse. Suggestions on repair?


Hello. I can help, but please could you tell me how many times the front LED blink?. After connecting and press power, see how many times the LED blink. are you sure the TV model is same as that spelling on your question?. send me your answer and will answer soon. thanks

Aug 14, 2011 | Projection Televisions

1 Answer

I have a 55 in Toshiba Cinema Series HD the colors are out of alignment so I have three pictures stacked behind each other. Is there an adjustment or repiar


I have a Cinama Series HD Toshiba and it has a Problem with the picture theres red letters behind the white , it like the colors are stretched, theres red eye above the real eyes and same with the teeth area, what could be the problem?

Nov 09, 2010 | Toshiba TN61X81 61" Rear Projection...

1 Answer

Color convergence issue.


Yes,U know how to solders?Must replaced 2 convergence ICS,and some or all it resistors.Tries websites Tv repair World.com,Tvrepairworld.com to buy a convergence to repair it ur self.The shop will cost U $300 for parts and labors.

Mar 27, 2010 | Toshiba 55H70 55" Rear Projection...

1 Answer

60SDX88B. No video, No sound. DP06 Protection


not a solution but i have a 50gx30b doing something similar, no picture no sound, 3 green leds are lit up on the main board and then one red led lit up also on main board, front panel red led stays on for about 30 -50 seconds and then it all shuts off, I then have to unplug and replug to get the same results.

Mar 03, 2010 | Hitachi 60SDX88B 60" Rear Projection...

1 Answer

I have a ws-65908 that won't power up. When I press the power on button, the green light at the ON button comes on then goes off 3 seconds later. Any ideas on how to fix it?


Have you tried to access the self diagnosis feature by holding in the menu button and the device/input button on the set for five seconds? The led should blink a series of blinks then pause briefly then blink another series of blinks for the 2nd digit let me know what the blink code is an I will assist you.

Jun 25, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

TP61H95 Toshiba Cinema Series 61" The Image rolls


defintly the convergance.if the con is on a small board ,maybe 130 big board 250&up.if u know how to solder 35$ each STK and u need 2. and check each internal fuse with a ohm meter with tv power unplugged

Mar 12, 2009 | Toshiba TP61H95 61" Rear Projection...

1 Answer

Our tv is 10 years old toshiba cinema series it has blue and red


It will be 11 years next month that I've had my Toshiba 55H55 Cinema Series and have the same problem every now and then, if you haven't already done so, go to the picture settings and scrolling down to conversion and it will take you through 3 steps of adjustments,there is a white cross in the middle of the screen line up the red first and then the blue, it will then take you to a screen with numbers, ID the clearest number and exit out, you should have a clear picture again. I hope this helps.

Jan 06, 2009 | Toshiba 50H81 50" Rear Projection...

1 Answer

Toshiba Cinema Series


possible regulator ic. in the power supply.

Nov 20, 2007 | Toshiba 55H70 55" Rear Projection...

1 Answer

Toshiba 50" cinema series


Try to unplug and replug back the power cord of the
tv and turn it on again. Sometime this work.

Sep 09, 2007 | Toshiba 55H70 55" Rear Projection...

Not finding what you are looking for?
Toshiba 61H71 61" Rear Projection Television Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...