How do I install developer in a new AR-207 copier I purchased on the internet?
I purchased a new AR-M207E copier from an internet supplier. It arrived with all the documentation and a pouch of developer. The documentation provided does not provide any information about how to install the developer. I've been warned that if it's not done correctly the equipment could be damaged. Any information about installing new developer?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open the right side door, open the front door, remove the toner cartridge and look inside. There should be a blue screw above the hole where the cartridge goes, loosen it and then remove the developer unit. At this point you can grab the black cover just to the right where the toner cartridge fits and pull out the drum unit.
Set-up for this copier sure isn't well-documented. We just got ours
working today, found out how to add the toner by following the instructions here:
https://www.businessneedz.com/Manuals/ar168s_setup.pdf (yes, it lists a
different model number, but the instructions worked, and were linked
from the ar-208d product page from the supplier)
does the line only show up when making copies from the adf or both when you put it on the glass. if only when thru the adf the **** glass is dirty. that is the glass that is only about an inch wide. be carefull of the two pieces of tape that are on both the front and back of that glass they fall off easly.