Question about Printers & Copiers

1 Answer

Copier Minolta model D1520

Error code C-0072 shows on screen...C0072 Sub toner hopper motor problem


Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Printers & C... Expert
  • 1,326 Answers

Remove the toner bottle and let the copier warm up to Ready, then re install the toner bottle and see what happens

Posted on Feb 08, 2008

  • Kiv Makara Jun 30, 2010

    It is still same C-0072

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C0072 copy error


The error code C0072 deals with the toner hopper. I would remove the toner bottle and close the front door and wait till the copier comes to ready and make a copy, if it works install the toner and see what happens. The problem may be in the toner bottle holder.... There is a "HP" sensor that may be dirty or broken. Good Luck

Nov 05, 2013 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

I have a pitney bowes copier model C350 giving me an error code C0072. What is this?


Sub Hopper Toner motor mechanism malfunction.Remove rear cover,pull out toner cartridge,Remove sub hopper unit fixed under main hopper toner assembly and change the sub hopper motor or the agitator levers gears.

Aug 11, 2012 | Printers & Copiers

1 Answer

Code C0072


You did not give the model number? So, I'm going to guess, did you just add a new toner? If so remove the new toner bottle and close the door / cover and see if the copier comes to ready? If so, make a copy and when the copy is done install the toner bottle. The error code C0072 deals with the toner hopper motor. If the code will not clear, then you may have a broken gear in the hopper drive unit. Good Luck

Mar 28, 2011 | Konica Minolta Printers & Copiers

1 Answer

Error code C0601 Error code C0072


for the 0072 try this:

Power off the machine. Then remove the toner bottle be careful the hole might be on the bottom toner is going to go everywhere. Then close the toner cover and turn on the machine. Let the machine go through it normal routine. When it asks for toner install the toner correctly. If THE KUNB on the side of the bottle is damage put a new one in that KUNB is what the toner motor uses to turn the bottle if it damage you get a code. If that does not work you might have a bad motor or the home sensor or actuator for the toner bottle is bad worse case the control board is bad
As for the 0600 code the scanner the bright lite under the big glass is not lighting replace the lamp and board

as for the

Dec 16, 2010 | Minolta DiALTA Di183 Copier

1 Answer

Minolta 6100 displays message C0072


Are you certain it is a Minolta 6100? The only 6100 I am aware of is a Magicolor 6100 color printer. My service manual for that model lists no service code C0072.
C0072 is a common Minolta copier code which pertains to the toner add system. I had a service call the other day for C0072 and it was the toner cartridge not fully "locked" in to it's receptacle, so you can start there. Opening and closing the front door on most Minolta's will reset this code.
Good Luck

Oct 21, 2009 | Minolta Printers & Copiers

2 Answers

Minolta c0072 code, hopper or toner?


C0072: Sub Hopper Toner Replenishing Motor M9’s
Failure to Turn

Sep 03, 2009 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Copier Minolts ep4050 error code C0072 +


C0072 is aerror code for the sub hopper unit. It is having a hard time adding toner or that the toner motor is ON for to long. It is having a hard time kepping up with the ATDC. The M2 is a counter, it can be reset in service mode, but major parts have to be replaced to clear it..

Mar 25, 2009 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Minolta copier 2050


OK CAREFULLY take out the toner bottle, then open close the front door, then power off the machine, wait 10 sec, then power the machine up with the toner bottle out, only add the bottle when it ask for toner

Jan 09, 2008 | Minolta Printers & Copiers

1 Answer

Toner




Di200 [Subject] "Please Add Toner" is displayed even though the toner bottle is full. The ATDC circuits have been checked and the main and sub hopper motors are good. [Description] "Please Add Toner" is displayed even though the toner bottle is full. The ATDC circuits have been checked and the main and sub hopper motors are good.
[Solution]
CAUSE: Inside the sub hopper, the magnet (P/N 9326-2900-06) may be catching on the inside of the hopper, preventing proper actuation of the Sub Hopper Toner Empty switch.

SOLUTION: Make sure that the actuator can move freely up and down when no toner is in the sub hopper.

Dec 21, 2007 | Konica Minolta DiALTA Di200 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...