Question about Projection Televisions

1 Answer

Hitachi rear projection lcd washout color

I have a 50 inch Hitachi lcd projection tv and it developed a washout color on the right top potion of the screen the size of a palm. What could be the problem with it.

Thanks.

Robert

Posted by on

  • rtromero Feb 08, 2008

    50v500. I browsed the internet and found a lot of people with the same problem. It relates to the Light Engine. My issue now is that the tv has no more warranty. I am not sure where to start now if ever hitachi covers this part because it is too common of a problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Do you have model number?

Posted on Feb 07, 2008

  • Cary Farah
    Cary Farah Feb 08, 2008

    Try calling Hitachi, usually they will be able to cover your parts, if
    you pay the labor, after a servicer has verified the LE is fubar. Call
    Hitachi and see what they can do for you. Just make sure you are really
    nice and polite, that always helps when you get the person on the other
    end to really want to help you.



    good luck

    please mark the post with a fixya!








×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top left hand corner is fuzzy


I HAVE AN OLDER HITACHI 53" PROJECTION TV THAT IS BLURRY IN THE UPPER RIGHT AND LOWER LEFT CORNERS. IT LOOKS LIKE THE TEXT IS OVER LAPED WHEN PLAYING MY PS3. IT MAKES IT HARD TO READ. THERE IS NOT ANY PROBLEM WITH COLOR, JUST BLURRY. HOW CAN I FIX

Sep 05, 2010 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

What are the best video settings for a Hitachi (46GX01B), 46 inch, rear Projection TV (from 2001) in regard to: contrast,brightness, color, tint, sharpness, etc. The setting level goes from 1% to 100%....


The best setting are the ones you prefer the most.In general most sets are optimized for 50% on color and tint and usually 70% or more for bright and contrast.

Nov 08, 2009 | Hitachi 46GX01B 46" Rear Projection...

1 Answer

Optical engine


The best thing to do is to call Hitachi and see if they would be able to help with the cost of the repairs because it will be expensive.
Hope this helps,
Skyassoc

Jul 16, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

5 Answers

50 inch Hitachi Ultravision LCD Rear Projection Television


Hitachi has had problems with their light engines. Very expensive. Contact Hitachi as they may give you consideration even if this is out of warranty.

Apr 15, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi Projection Color TV


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 10, 2007 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Hitachi 50UX57B 50 inch Rear Projection smearing...


try this

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Sep 18, 2007 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Hitachi 50 inch Rear Projection Color problem


Which sounds like a loose connection in the video or chroma section. you can carefully tap around affected area with a rubber screwdriver handle(not metal part) and see if it does come and go and look in that area for loose connections that needs soldering back. Hope this helps

Jul 30, 2007 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Hitachi 52 projection tv


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Jan 22, 2007 | Hitachi 50V710 50" Rear Projection...

1 Answer

Digital Array?


I have the very same problem. Was there a solution to landfill2004?

Nov 13, 2006 | Hitachi 50GX30B 50". Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...