Question about Kyocera KM-1505 Copier

2 Answers

How to reset the unit...

Elp here... :)

Kyocera KM 1500 how to reset the unit

Posted by on

2 Answers

How do u reset the number of copies back to zero..

Posted on Apr 19, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Reset what? The imaging unit or the toner cartridge? Replace with a new one or get a recharged one.

Posted on Feb 10, 2008

1 Suggested Answer

KyoDoc
  • 38 Answers

SOURCE: how to reset the unit...

press and hold the following buttons in the sequence below.

(1) Stop/clear, (2) start, (3) exposure lighter, (4) exposure darker, release the 4 buttons and press the stop/clear button again. the display should now indicate 000.

below the display are 3 buttons... press the left button once, the middle button 6 times, and the button on the right 3 times. the display should now indicate 163.... press the start button 3 times.

your machine will now restart, and if the code was as a result of a power problem, should now work fine. if not the problem could be related to the fixing unit, power supply, or one of the boards.

Also do not tamper with any settings while in the service mode, this WILL have undesired effects. TAKE NOTE, this will only work if your model is the KM-1500

Posted on Jul 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kyocera error code c 6 400


check your fuser unit thermistor or thermostat or lamp as the following digita 1087 1087 and put 163

Jun 03, 2014 | Kyocera Mita Toner For Kyoceramita...

1 Answer

How to reset kyocera cs-1500


Hi Nickolas,
You may want to visit this site that has a manual of your machine in order for you to check the reset process. Hope it helps.
Kyocera KM 1500 KM CS 1500 Operation Guide Rev 2 0

Apr 25, 2014 | Xerox Phaser 4500 Printer

2 Answers

How do reset c-6 error code kyocera km 1500


my dear you press 10871087 after you press 163 and start baten

Jun 10, 2012 | Kyocera KM-1505 Copier

2 Answers

Kyocera Mita KM-1500 shows flashing c-6 and 020 Pls help


check the fixing unit thermoswitch,thermistor & heaterlamp one of them is the cause of error

Nov 22, 2010 | Kyocera Mita Printers & Copiers

2 Answers

Requist for sugasion kyocera km-1500 toner


it is support cnon np 1215 toner
first time
you clean copier toner unite clean complite previous toner then put canon np 1215 toner print ok

May 28, 2009 | Kyocera KM-1505 Copier

2 Answers

Kyocera Mita 1500 Error code 6000


This C6000 error code is triggered by a few things all having to do with the fixing heater wire. Ask your technician to check the thermistor, the thermal cutout and the connection between the thermistor and the power supply board. My guess would be that the power surge overloaded the power supply board. This is not something that can be reset and may require new parts.
The manuals that describe the error codes are only available to Kyocera technicians, sorry.
Henry

May 26, 2009 | Kyocera KM-1505 Copier

1 Answer

KYOCERA MITA KM-1500 ERROR CODE C7980


C-7980 - Means that the waste tonerresevoir in the process unit is full with less than 100,000 copies onthe unit.
Clean/ empty the waster toner and vac.Also clean the sensor.
You may have to change the Process unit if cleaning does not work.

Mar 02, 2009 | Kyocera KM-1505 Copier

2 Answers

How to reset the unit...


press and hold the following buttons in the sequence below.

(1) Stop/clear, (2) start, (3) exposure lighter, (4) exposure darker, release the 4 buttons and press the stop/clear button again. the display should now indicate 000.

below the display are 3 buttons... press the left button once, the middle button 6 times, and the button on the right 3 times. the display should now indicate 163.... press the start button 3 times.

your machine will now restart, and if the code was as a result of a power problem, should now work fine. if not the problem could be related to the fixing unit, power supply, or one of the boards.

Also do not tamper with any settings while in the service mode, this WILL have undesired effects. TAKE NOTE, this will only work if your model is the KM-1500

Jul 02, 2008 | Kyocera Copystar CS-1620 Black and White...

3 Answers

Error code C-6 for kyocera km 1500


c6-400 code error is poor connection (power supply)


press start and clear/stop button

the code is inizialized

Mar 02, 2008 | Kyocera KM-1505 Copier

1 Answer

How to reset the unit...


initialize all data:initialize all the backuy ram on the main board to return to the orignal setting.1-press the start key2-select(on)using zoom+/-keys3-press the start key alldata in backup ram is initialized and oriinal setting for europe country specification are set.

Jan 22, 2008 | Kyocera KM-1505 Copier

Not finding what you are looking for?
Kyocera KM-1505 Copier Logo

Related Topics:

841 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Printers & Copiers Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

NewYork kyocera HP...

Level 3 Expert

513 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Kyocera Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...