Question about E-Machines etower 633id PC Desktop

2 Answers

My computer shutdown by itself

When i turn on my new computer ,immediately before opens the windows shutdown by itself.would you please tell me what makes it to be shutdown by itself.
N.B it is a new computer which i did not use it before.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

This could be possible anything. RAM or the Display (Video card drivers) or Harddisk may be faulty or misbehaving.

To find this restart your machine on safe mode or "Enable VGA Mode". If it is successful try finding any error messages in eventviewer. Or even uninstall the VGA Drivers. And restart the machine.
If still not able to get into the machine please reinstall the OS.
Cheers - Parveen

Posted on Feb 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers

There are only two possibilities and one is ..lets say rated as faulty 85% and this is the power supply and the other 15% is the mother board.
however from what I have seen before I can enlsrge the percent of the power supply,because you have power but it is not sustained..so..
I suggest you replace the power supply,oor..if you bought this computer new and one piece go back to the vendor and claim the replace.
have a nice day and please rate my answer.thank you.
bye

Posted on Feb 07, 2008

  • andi n.
    andi n. Feb 07, 2008

    P.S. Oh by the way..this problem of yours has nothing to do with the operating sistem if it doesnt restart.if it shud down and remain silent then 120%is a hardware problem..so dont worry about software and windows and so on..just go and check the hard componnets I mentioned in before..
    bye bye

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats (Failure configuring Windows updates Reverting changes Do not turn off your computer.


windows configures windows systems with each new update for that windows system
if you have the update installed automatically as they become available then the computer has to suspend operations while the updates are put into the operating system
That means that a new registry is created and the program placed accordingly on the hard drive
it requires that the computer be left on until that is achieved and will in some instances shut down and then restart the computer to effect certain changes
It is imperative that when this is happening that you leave the computer turned on and leave it alone as any programs you open may become corrupted or corrupt the existing programs
you will normally get this notification on shutdown which will shutdown when finished and on opening next time so that the previous download can be configured into the computer properly
it just means that you have to wait for the computer to do ti's thing

Jul 25, 2015 | Computers & Internet

1 Answer

Notebook lg r410 starts and shutdown itself after loading windows


Immediately after turning on the unit, press F8 repeatedly. In the next display that appears, use the arrow key up or down to highlight recent configuration that worked, then press enter.

Oct 10, 2013 | LG Computers & Internet

1 Answer

When i go on the internet my computer stops can you help me please Terry and violy Mcintosh


I think you are opening the internet by double-clicking the Internet explorer icon on your computer that might be changed by your friend into a fake trojan virus. Let's see how it is---
Right click on your desktop -->New-->Shortcut. Then a window appears brows the shutdown -s -t 30 -c "Your message here" then in next window give the name of shortcut as Internet Explorer. Change the icon on desktop that is created with IE icon. Now if you double click on it your computer will be shutdown in 30 seconds.
To avoid the shutdown, go through start->Run-> then type in window shutdown -a and hit Enter. It will work

Jun 28, 2011 | Computers & Internet

1 Answer

I set shutdown time at 10 pm by using crontab but server shutdown at 1800 or 6 pm . I am using LINUX CentOS


Hi
Try using ttps://launchpad.net/gpoweroff also the other way to set auto shut down is

Also another way is

A simpler way is to add the appropriate shutdown command to the /etc/profile file (as root):
Open a terminal window and su to root:
[user@localhost ~]$ su
Password: (enter root password here)

This example will open /etc/profile in the kate text editor:
[root@localhost user] # kate /etc/profile
Add the following command to the end of the file:
shutdown -h hh:mm
Replace hh:mm with the time at which you want the computer to shutdown automatically each day
The -h option tells shutdown to turn the
computer off (halt).
For more information on the shutdown
command open a terminal window and enter:
man shutdown
Remember, the man command is your friend.
With it you can get information on nearly
any command available in your Linux system

Let me know if this helps

Mar 17, 2010 | Fujitsu Siemens Siemens PRIMERGY RX300...

1 Answer

My samsung pc work too slow and it shot down.


IF LAPTOP: Please check your charger`s voltage if matches with your laptop`s voltage. try to turn it on without battery. put every cable out from your computer, usb devices and sticks as well.

IF PC: turn on your pc and do not touch for couple of time. just watch your computer and try to understand when it shuts down itself. is shutdown is a direct power off or a classical windows shutdown process.

try to find your computer`s specifications (if windows, right click on your MY COMPUTER icon and click PROPERTIES option. Then you will see some information abot your computer like CPU speed and RAM memory. Check if you have enough space in your hard disk. You have to have around 1 gb free space to work with your computer. try to disable some startup programs which you can see next to your clock in your START taskbar (for windows). Right click to the icon`s and click exit. Try to understand if your computer is overheating. If so please ask a technican.

please try them.

Oct 14, 2009 | APC Computers & Internet

1 Answer

Screen stays on when i attempt to shutdown - it will not close


It could be many problems, but it most likely your operating system. Run a virus scan on your computer with whatever anti-virus that you're running to see what it turns up. Also run a 'disk cleanup' by right clicking your storage drive in 'My computer' and selecting 'properties'
Once you've done that, from the same properties window that opens up, click the 'tools' tab and check your drive for errors.
Also make sure that your have all the appropriate updates for your operating system.

May 06, 2009 | Computers & Internet

1 Answer

How reboot my satallite pro laptop


To reboot a windows computer with Windows XP, click the Start button in the lower left corner, then click Shutdown, then Shutdown again in the popup box.

For a Windows Vista machine, click the windows Orb in the lower left corner, then the small arrow next to the lock on the bottom right of the start menu then click shutdown.

If you need to manually power off, hold the power button down for 5-10 seconds until the computer itself shuts off. This is only for when traditional methods do not work.

Jan 12, 2009 | Computers & Internet

4 Answers

Windows Vista will Shutdown but will restart in immediately


You can create a shutdown icon on your desktop that might resolve your issue.

  1. Right-click on the desktop, choose New and then Shortcut.4ffc395.jpg
  2. In the shortcut location box, enter
    • Shutdown.exe -s -t 00
  3. When you've clicked 'Next...', you'll be asked to name the shortcut. Probably best to name it 'Shutdown'
  4. After you click 'Finish' you should now have a new icon that you can double-click to shutdown your computer.
Hope this helps! : )

Jun 28, 2008 | Microsoft Windows Vista Home Premium with...

3 Answers

Turns On then immediately turns itself off


Good Day y'all;
First I will tell you what the factory tells us then I will tell you what the problem may be: This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems. To activate this turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times. 1 - 2 = no error detected 2 - 1 = X-ray protect (high voltage or beam current) 2 - 2 = Short protect (short protect monitors low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source) 1. SHUTDOWN AT POWER WITH SELF DIAGNOSIS ERROR 2 2. CHECK FOR LEAKY C9A60 470 PF 1000 V PART # 154P400030, PARALLEL TO D9A57 ON THE POWER PCB (NOT SHOWN IN THE SCHEMATIC). 2. SHUTDOWN AT POWER WITH SELF DIAGNOSIS ERROR 2 2. CHECK FOR OPEN FUSES F9A04 AND F9A05 PART # 283P043090 ON THE +24 AND -24 VOLT LINES. IF THE FUSES ARE OPEN THE CONVERGENCE OUTPUT CIRCUIT WOULD BE SUSPECT. 3. SELF-DIAGNOSIS INDICATES SHORT PROTECT. CHECK FOR A SHORTED IC4B01 PART # 270P261020 (VERTICAL OUTPUT) LOADING 24-VOLT SUPPLY LINE. LOCATED ON THE MAIN PCB. This model is also known to get fluid on the boards. The fluids come the picture tubes, this helps projection TV's to keep cooler tubes, all companies use this method, but MIT has the biggest concern of the leakage.
Sorry, but hope this was helpful. These TV's can repaired, shields can be provided. Call an authorized service dealer to this repair.
Good Luck, big IRISH.

May 27, 2008 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

Cannot install printer software ,tells me a newer version of software is already installed .this is a HP pavilion computer using windows xp home addition and a hp psc 1350 all in one. I uninstalled the...


Hi,
try uninstalling any software relating to the printer.
shutdown the computer. Remove any printer to computer cables. Re-boot ( startup ) the computer.
let it set itself up. then shutdown.
turn off the power to computer, put your printer cable back in, as if you were installing it for the first time.
the computer should have found new hardware ( your printer ) And ask for a driver. ensure your HP disk is in the drive, and ask to search Drive D:- Or E:- wherever your CD is located.
If it,s already got the latest drivers installed, i would,nt worry unless your printers not functioning correctly.
Mike @ Compurepair.

Feb 19, 2008 | Computers & Internet

Not finding what you are looking for?
E-Machines etower 633id PC Desktop Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...