Question about External Drives

9 Answers

Kingston pen drive locked by LOCKv116.exe

Hello, i have a imation flash disk and kingston flash disk(4 Gb) imation has a program that set the password on your imation flash, i run this program "LOCKv116.exe" on kingmax flash disk and set password on it, but now after insert flash disk to my pc,detected but when click on it this message appear "please insert a disk into drive k:" this message appear in all of pc that i examine them. please help me.

Posted by on

  • 10 more comments 
  • Anonymous Feb 09, 2008

    i have same problem

  • mbbarange Feb 25, 2008

    I tried to format the pen drive but the drive is not accessible. system detects it but when i click to open it, system display the message
    "inset the disk into drive "

  • kislay Mar 06, 2008

    i installed LOCKv116.exe on my kingston 2 gb pendrive but after that i am unable to access my pendrive when i cliick the drive letter that is f in my case i get the message please insert the drive i tried almost everything diskpart format diskmanagement but none of them are working only thing left is linuxand i am on it i will try to fix it from linux but please help me if you can

  • Yoges Maharjan
    Yoges Maharjan Mar 10, 2008

    I tried to format the pen drive but the drive is not accessible. system detects it but when i click to open it, system display the message
    "inset the disk into drive "

  • rit ramto Jul 02, 2008

    Hey yeah i have the same problem. any solution to it?, please email me 
    ramto_8@hotmail.com


    except that mine happenend when i tried to format the pendrive. windows said it cannot format it and then bang each time i tried to insert the pendrive i get the same ******* problem as you guys.

  • mahesh_lya Jul 18, 2008

    please send solution

  • Anonymous Aug 29, 2008

    i have the same problem what is the solution for this

  • baby_isaac Sep 03, 2008

    Every time i try to put in a password in will not poen and it is driving me carzy... please help me!!

  • comp_eng2032 Sep 29, 2008

    hello, i have a imation flash disk and kingston flash disk(4 Gb)
    imation has a program that set the password on your imation flash, i
    run this program "LOCKv116.exe" on kingmax flash disk and set password
    on it, but now after insert flash disk to my pc,detected but when click
    on it this message appear "please insert a disk into drive k:" this
    message appear in all of pc that i examine them. please help me.

  • sap06 Dec 04, 2008

    i have kingston Pendrive of 32GB.but it get locked.the computer detects the pen drive but when i click it gives the message"Please insert the disk" and when I try to format it the message displays "Windows can not format the drive.

  • treekai Feb 20, 2009

    when i insert the flash disk into usb port. my computer can detect my removable drive, but pop up a windows "Please insert a disk into drive:e"

  • omars_eng Apr 11, 2009

    kingston 1 GB

×

9 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I want lock my pen drive by password.

Thanks & Regards
Sandeep

Posted on Sep 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem with kingston 2GB, i format my pc, also with pen drive attached , now it saying please insert message but pc will detect it

Posted on Feb 22, 2008

I have same pproblem

Posted on Jun 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks Guest Salutation 4
it works very well, otherwise i thought i have to get new one, but with your help it solved.

thanks again

Azam (UK)
(mazam1@hotmail.com

Posted on May 02, 2008

1. - You should LOCKv116 icon on the desktop
2.- Ejecutarlo sin el Pen puesto en tu PC. 2. - Running without Pen placed on your PC.
3.- Te Aparece un mensaje: (Please insert device or run this utility as privileged user) en este momento debes insertar el Pen en el puerto USB que lo configurastes, es decir cuando le pusistes la contraseña con el LOCKv116. 3. - We got a message: (Please insert device or run this utility as privileged user) at the moment you must insert the pen into the USB port which configurastes, that is when you purists password with LOCKv116.
4.- Ahora te aparece la ventana observando que tienes 3 botones: LLave, Candado Cerrado y Candado Abierto), Haz Click en el de abajo: (Candado Abierto) 4. - Now you see the window noting that within 3 buttons: Key, Lock Closed and Open Lock), click on the below: (Open Lock)
5.- Introduce tu contraseña y Espera hasta que te aparezca la ultima ventana que dice: (The Secured Partion of the USB Pocket Drive is now accesible. Safely removi.....etc.) haz Click en el unico boton Verde que te queda. 5. - Enter your password and you wait until the last window appears that says: (The Secured Portion of the USB Pocket Drive is now accessible. Safely removi..... Etc.). Beam Click on the green button only you left.
6.- Usa el explorador para que veas el contenido de tu Pen... 6. - Use the explorer to see the contents of your pen ...

NOTA: Al Expulsar el Pen automaticamente se vuelve a bloquear, yo lo considero muy buena esta llave por lo que si se llegara a extraviar el Pen nadie puede abrirlo ni formatearlo. NOTE: U has only 6 times to give correct password. Don’t try give correct password within 3 times.


Kdharmasri@yahoo.com

Posted on Apr 08, 2008

1. - You should LOCKv116 icon on the desktop
2.- Ejecutarlo sin el Pen puesto en tu PC. 2. - Running without Pen placed on your PC.
3.- Te Aparece un mensaje: (Please insert device or run this utility as privileged user) en este momento debes insertar el Pen en el puerto USB que lo configurastes, es decir cuando le pusistes la contraseña con el LOCKv116. 3. - We got a message: (Please insert device or run this utility as privileged user) at the moment you must insert the pen into the USB port which configurastes, that is when you purists password with LOCKv116.
4.- Ahora te aparece la ventana observando que tienes 3 botones: LLave, Candado Cerrado y Candado Abierto), Haz Click en el de abajo: (Candado Abierto) 4. - Now you see the window noting that within 3 buttons: Key, Lock Closed and Open Lock), click on the below: (Open Lock)
5.- Introduce tu contraseña y Espera hasta que te aparezca la ultima ventana que dice: (The Secured Partion of the USB Pocket Drive is now accesible. Safely removi.....etc.) haz Click en el unico boton Verde que te queda. 5. - Enter your password and you wait until the last window appears that says: (The Secured Portion of the USB Pocket Drive is now accessible. Safely removi..... Etc.). Beam Click on the green button only you left.
6.- Usa el explorador para que veas el contenido de tu Pen... 6. - Use the explorer to see the contents of your pen ...

NOTA: Al Expulsar el Pen automaticamente se vuelve a bloquear, yo lo considero muy buena esta llave por lo que si se llegara a extraviar el Pen nadie puede abrirlo ni formatearlo. NOTE: U has only 6 times to give correct password. Don’t try give correct password within 3 times.

Kosala Dharmasri

Kdharmasri@yahoo.com

Posted on Apr 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hello, i have a imation flash disk and kingston flash disk(4 Gb) imation has a program that set the password on your imation flash, i run this program "LOCKv116.exe" on kingmax flash disk and set password on it, but now after insert flash disk to my pc,detected but when click on it this message appear "please insert a disk into drive k:" this message appear in all of pc that i examine them. please help me.

Posted on Oct 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

You have to reformat your pen drive like other hard drive it it will work again

Regards
Balisonu79

Posted on Feb 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I have found an interesting website for earning money in Internet. You can Earn Rs.2000 Jobs is simple doing surveys in the internet. It take only 2-5 min to complete the work. On an average you can Earn. Rs.1000 per day. Click thishttp://www.surveyspaysu.com?id=234188 . and register today

Posted on Jan 07, 2009

2 Suggested Answers

  • 2 Answers

SOURCE: LOCKV116

hello, i have a Kingston 2GB Pendrive.I had run a program "LOCKv116.exe" on my pendrive and set password on it, but now after inserting pendrive to my pc, it is detected but when open it this message appears "please insert a disk into drive G:" If try to format it message is "There is no disk in drive G:"..If I run the program LOCKv16.exe it shows a message "please insert the device or run this utility as previledged user."

Posted on Oct 15, 2008

  • 77 Answers

SOURCE: pen drive

First thing is you can try to detect your pen drives with Linux. 

(DSL Linux is just about 50 MB download. You'll need to burn it on to a CD as an IMAGE and not copy on the CD directly, then boot with the CD.It will automatically mount your USB drive and you can cpy the data to your hard disk and later format the USB drive.) 

Get it from here: http://damnsmalllinux.org/download.html 

If that too fails, then you can try recovering using a data recovery software. Or contact me and I can personally help but a live chat session would be better since posting here will take and waste time. You could contact me on 

rsletters-fixya@yahoo.com 

and then we can proceed to chat and solve this issue. I won't take any charge. I'll be happy helping getting the data since I know how it feels to lose precious data. 

HTH,
Regards,
Deboo

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 4 GB kingston datatraveller 120 pen drive


Try re-formating the Pen Drive. Also check your USB and HUB drivers in Device Manager

Apr 26, 2010 | External Drives

3 Answers

Windows was unable to complete the format 16gb kingston flash drive


windows was unable to complete the format flash drive

Apr 28, 2009 | External Drives

1 Answer

I want to boot my pc from pendrive


hello friends..here is the great solution for you

http://www.cnet.com.au/boot-windows-xp-from-a-usb-flash-drive-339271777.htm

Apr 25, 2009 | Sony 1GB Micro Vault Ultra Mini USB 2.0...

1 Answer

Pen drive


First thing is you can try to detect your pen drives with Linux. 

(DSL Linux is just about 50 MB download. You'll need to burn it on to a CD as an IMAGE and not copy on the CD directly, then boot with the CD.It will automatically mount your USB drive and you can cpy the data to your hard disk and later format the USB drive.) 

Get it from here: http://damnsmalllinux.org/download.html 

If that too fails, then you can try recovering using a data recovery software. Or contact me and I can personally help but a live chat session would be better since posting here will take and waste time. You could contact me on 

rsletters-fixya@yahoo.com 

and then we can proceed to chat and solve this issue. I won't take any charge. I'll be happy helping getting the data since I know how it feels to lose precious data. 

HTH,
Regards,
Deboo

Feb 16, 2009 | Compaq External Drives

9 Answers

Unable to format 64 gb kingston pen drive


I am having 64 gb kingston pen drive.
But after formatting from command promt its file system is RAW an i cannot use the drive now.
Beacuse it is showing properties as 0 bytes.
The drive cannot be formatted.

Nov 20, 2008 | External Drives

9 Answers

I had run imation lock on kingston 4 gb and now its says "Please insert the device or run this"


its a little tricky, just try it
  1. unplug ur usb drive
  2. double click the imation lock
  3. when the message appear "Please insert the device or run this utility as privileged user" plug the flash/usb drive quickly
  4. USB will start working
  5. run the imation lock again and disable the password protection
  6. delete the ugly imation lock from ur system
i hope u find it use full, plz give ur feed back at: masood@inbox.com

Jul 28, 2008 | External Drives

1 Answer

Write protected pendrive


I protect my pen drive by this software

http://penprotectorenglish.wordpress.com

I hope you can leave protection from your pen drive

Regards


Mar 24, 2008 | External Drives

1 Answer

Flash locked by lockv116.exe


how to solve problem (how to fix locked flash drive because of LOCKv116.exe )

Feb 08, 2008 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

2 Answers

LOCKV116


hello, i have a Kingston 2GB Pendrive.I had run a program "LOCKv116.exe" on my pendrive and set password on it, but now after inserting pendrive to my pc, it is detected but when open it this message appears "please insert a disk into drive G:" If try to format it message is "There is no disk in drive G:"..If I run the program LOCKv16.exe it shows a message "please insert the device or run this utility as previledged user."

Dec 28, 2007 | External Drives

Not finding what you are looking for?
External Drives Logo

Related Topics:

4,389 people viewed this question

Ask a Question

Usually answered in minutes!

Top External Drives Experts

laikexpert
laikexpert

Level 3 Expert

281 Answers

Clive Gray

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an External Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...