- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn power on on from front of DVD player (not remote)
Immediately open tray
enter 9735 from remote control
(you may have to attempt this several times as timing seems to be
important, but may not be necessary to power off and on again with each
If you can not enter in the hidden menu after 5 attempts repeat
from first step again by powering off unit. If you till have no success
please see comment at bottom
Hidden menu appears
on remote use arrow down to region
use arrow right to select region code on right side
use arrow up to go up to region 1 , then one more arrow up and no
region will be highlighted. (line above region 1 MAY be highlighted
Hit enter on remote
Close door, hack is complete
Note: This player will play back PAL or NTSC DVDs and output automatically PAL or NTSC
or can be forced to PAL or NTSC. I will support DIVx up to
1024x576 with tested Bitrates up to 2200kbp via the USB port. player
seems to skip on such videos paying from CR media.
This player comes in various flavors. If above code does not work
after several tries, repeat procedure with codes below in the following