Question about Sony KP-65WV700 65" Rear Projection HDTV

1 Answer

KP65wv600 The Tv will turn on. All red green and blue come on. Then the green and red go off. The blue stays on for a few seconds then the Tv shuts off with 7 blinks of the standby light.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

This unit is notorius for having shorted or int. shorted crts. Not good news ans this is very expensive and the crts are no longer available and can only be rebuilt by send to Video Display company.

Posted on Feb 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony kp-51ws510 color rear video projector tv when i turn it on it stays on for abt five seconds and then turns off and also the timer and standby light is flashing red


this model did have problems with bad picture tubes---screen goes bright red,green,blue and set shuts down.

set also does this to protect itself---when fails look to see if specific sequence of blinks

Apr 17, 2012 | Projection Televisions

2 Answers

My Sony KP-46WT500 screen shows the tv image in blue only for a few seconds, then it goes completely blank (as if it were off). Do I need to replace the bulbs?


It is rear projection TV that use 3 picture tubes of red-green-blue to show color picture on tv front screen.
Do you see standby red light blinking when TV shuts off after showing blue image for a while?
If red standby light is blinking, please count it how many times it blinks, there would be 3 seconds pause between blinks so count pause to pause and post it here to find out possible solution.
Thanks.


Dec 22, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

My red and blue crt go out and the green stays on


One or more of the CRT colors guns it dead,must be replaced.

Nov 03, 2009 | Sony KP-51WS500 51" Rear Projection...

2 Answers

D52W20BYX1 Green problem


I would go back to green tube disconnect ,unplug CRT board to green tube if set stays up playing its the tube.

Sep 19, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Turns green and shuts off


I had an electrician come over. He pulled out the bulb that was dead (for me it was the color that was flashing before it would turn off) and now I have a blue and green TV with no red. He said that the only way to fix it is to replace the red lamp with a new one.

Jan 16, 2009 | Sony KP-65WS500 65" Rear Projection...

4 Answers

Green flashes then tv turns off


or a new lamp. you could first replace the lamp.
the screen might work fine for a couple of seconds, but then it fades away or deteriorates. This means the lamp is going bad.

Aug 23, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

No picture sound is fine


tv comes on then turns blue at that time it shuts down. The power is on and then it blinks 5 times!!!

Apr 27, 2008 | Sony KP-65WS500 65" Rear Projection...

1 Answer

Red & green lamps shutting off leaving a blue screen


Could you show a picture of the distended cover you mentioned?

 

Were the light blue lines you were referring to, diagonal, or truly horizontal?

Oct 15, 2007 | Sony KP-57WS500 57" Rear Projection...

1 Answer

TV Problem with shutting off by itself


Mine just did the same thing.  Except for it was green instead of blue.  The service manual states 8 flashes from the light stands for an overvoltage.  After reading the manual for a bit I realized the bottom row of 3 adjuster screws from behind the speaker grill adjust the output for the red, green, and blue colors.  BEFORE OPENING ANY TV OR MONITOR PLEASE KNOW THAT THE VOLTAGE INSIDE CAN KILL YOU EVEN IF UN-PLUGGED so please be careful and only adjust what is mentioned here.  I un-plugged the tv, removed the grill and the board covering the internals, and carefully turned the 3 adjustment screws all the way down.  I then waited about 10 minutes (don't know if this made a difference).  I turned on the tv, turned the channel to an auxilary input (for a black screen), and slowly raised each of the 3 bottom screws one by one up clockwise until i could see a faint green, blue, or red line (depending on the screw), and then turned each one back a hair until the screen was black again.  Only adjust one at a time, the order for colors are blue, green, then red from the left.  I hope this fixes your problems.  Be careful when working inside a tv,  I suggest not using a screw driver to adjust the screws due to the possibility of it slipping and someone getting hurt.

Sep 16, 2007 | Sony KP-51WS500 51" Rear Projection...

Not finding what you are looking for?
Sony KP-65WV700 65" Rear Projection HDTV Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...