Question about Projection Televisions

1 Answer

My PVR says that the hard disc is full and all the items that were recorded and protected are gone and it says that there are 00 hours and 00 minutes available for recording time. How do I correct this problem, I have unplugged the power and cable for 24 hours and still can't do anything. Is this fixable at home, with a tech or what's the deal

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

You have top delete some programs

Posted on Feb 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung HCN4226W "image pinching"


The convergence IC has gone out and is located on the Main bd or the Power supply bd depending on the specific model and must be replaced and a Full convergence alignment must be performed to return your tv to a watchable condition. Only a Samsung trained tech can do this.

Jul 16, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

TV comes on to standby, but with record led flashing. pressing power on , power light turns green for 1 second, click from within unit, back to standby with record led flashing


Hi,

Initially, have you tried a full hard reset? If not, pls unplug from the mains. Most current devices would reset and revert back to factory default settings (assuming no internal hardware fault) when unplugged for a considerable period of time (a couple of hours).

Pls post back for any development(s) or even the lack of it.

Hope this be of initial help/idea. Good luck and kind regards.

Thank you for using FixYa.

May 01, 2008 | Projection Televisions

3 Answers

Hi, we have a goodmans GTVL27W23HD that was left on standby for 6 days, now will not show the digi-box channel, just a blue screen, sound only on scart 1 any suggestions anyone? something re-setting...


Try to unplug everything and plug it back in at the correct order(without power). Then plug the power and into the items in the correct order and let them power on for about 5 minutes. With the blue screen that may take about 15-20 minutes.

Apr 19, 2008 | Projection Televisions

1 Answer

Cannot get DVD recorder DVD 3470H to download from hard drive to a disc. The machine is about a year old and I'm using recordable DVD-R When I try to record onto the disc I get a screen which says the...


Hi Guys,
Thanks for the response.
I've solved the problem.
I was trying to download a programme that was too big from the hard drive to the disc.Once I inserted a divide in the progeamme everything worked Ok,
Cheers,

Dec 16, 2008 | Projection Televisions

1 Answer

Have a samsung Samsung LE26A456C and a toshiba dvd recorder. Have set up telly fine, set up video to play fine but cannot record


What is it that you are trying to record? If you are trying to record a DVD you have purchased onto a DVD-R, you will almost always run into a problem because most purchased DVDs have copyright codes burned into them, making them unrecordable. Most VHS tapes have these copyright protection codes in them as wel. If you are trying to record a television show, and are unable to do so, make sure that the DVD that you are using is compatible with your burner. If your burner is set up to record only DVD-R, then you must use only the DVD-R discs. If your burner is set up to record only DVD+R, then you must use only the DVD+R discs. Some burners will record both the DVD-R and DVD+R. If you have the right discs for your burner, make sure that the discs are correctly formatted to be recorded. Also, make sure that if you are recording from a cable box or other input that you have the correct unput channel selected on the burner. If these suggestions don't work, then it could be the brand of DVD that you have purchased (i.e. Sony,Maxell,TDK,Fuji,etc.). Check your manual for acceptable brands. I hope this helps you out. Let me know if I can be of further assistance.

Sep 08, 2008 | Samsung Projection Televisions

8 Answers

Thomson DTI6300-16 digital TV recorder frozen, red light on constantly, no resposnse to any commands. I think it needs a factory reset - how do I do this?


Try Resetting the box to its factory setting:
  • Menu > Setup > Help
  • Then press the Green Button (Even though it doesn't show as an option)
  • Then press the Red button for a full reset
Warning: You will lose all data on the Hard Disk!

I did this when mine wouldn't record anything and dumped all my pre-recorded programs.
Worked a treat.

Jul 20, 2008 | Projection Televisions

1 Answer

Bought a Nikkai A52HF digital reciever&recorder from Maplin. Installed 80Gb IDE HDD (tried it formatted in 3 different ways). Whereas it orks fine as reciever without the disc, with the disk it...


format it from the menu on the PVR the default code for the Nakkai is 888888 but the file format for the hard drive is probably UDF or some other format that windows cannot recognise or reproduce.... i think lol

Jul 12, 2008 | Projection Televisions

2 Answers

SCREEN FOR PT5499HD


Check this out USA AKAI CUSTOMER CARE 1-800-726-4405 Hours of operation (Eastern Time): 8:30 am ~ 9:00 pm (Monday through Friday) 9:00 am ~ 5:00 pm (Saturday) CANADA AKAI CUSTOMER CARE 1-800-293-5408 Hours of operation (Pacific Standard Time): 6:00 am ~ 6:00 pm (Monday through Friday Good Luck

Aug 15, 2007 | Akai PTH5498 54" Rear Projection...

3 Answers

Rca m50wh725 rear projection tv.


It has gone into protection mode. This is caused when a short circuit is detected by the power management system inside the tv. Try a hard reset: Unplug the power cord for a full 4 hours; then try it again and see if it will clear the protection fault and reset it. If the reset does not help you will need to have a tech look at the set and take voltage measurements inside to determine which section of the tv has failed and what components will need replacement. The cost of repair is always over $200 and could be much more, depending on the specific parts that need replacing. If the ICs have burned out the repair is around $400. The flashing of the standby light may mean something, but I do not know the diagnostic code RCA is using; most RCA models do not have any diagnostic blink codes in the set. Hope this helps. Let me know if I can help further.

Jul 06, 2007 | RCA L50000 50" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...