Question about NetGear MR814 Wireless Router

2 Answers

Mr814v2 wireless router not working with vista

Im having problems trying to get hte mr814v2 wireless router to work with windows vista any suggestions ??

Posted by on

  • acdizon Feb 10, 2008

    Is it compatible at all with Windows Vista?

  • Anonymous Apr 08, 2009

    not working

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

You may need to update the firmware in the router in order for it to be compatible with windows vista. In the router setting there should be an area to upgrade the routers firmware. If this doesn't work please refer to this http://support.microsoft.com/kb/928233

Posted on Feb 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same router, and it works with windows vista. I didn't have to do any firmware upgrade. I just plugged it in and it works..

Posted on Apr 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mr814v2 working fine but told my network is not secure. how do i secure it?


by logging into the router and changing the wireless settigs to use wpa-psk encryption .
http://kbserver.netgear.com/pdf/mr814v3_ref_manual.pdf
section 4-11

Jan 21, 2014 | NetGear MR814 Wireless Router

1 Answer

Hi. I have a Vigor 2910g router. The router is working. Im trying to change the configuration, but i cant access the web page. Im connected directly to one lan port. I type the router IP in the web browser...


Hi,


These are the general steps to all wireless connectivity.

Click the link below for proper cable connections in setting up your wireless network.

This link also provides somewhat a checklist on what you need for wireless connectivity.

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network


I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!

Mongkey

"Understanding explains better..."

Jan 31, 2011 | Draytek Vigor 2910G Dual WAN secure...

1 Answer

Wireless connection problem with the MR814v2


Try accessing the router by using the webpage address: ie linksys is: 192.168.1.1

and disable the security settings and save the setting and then try it on the other computers. If that doesn't work then see if there is a reset button on the back of the router. Push it in for a few seconds and then search for the wireless network which should be the routers name with a strong signal. If it still doesn't work then maybe the wireless portion of the router is going bad.

Hope this helps

Jul 08, 2009 | NetGear MR814 Wireless Router

1 Answer

I DO NOT KNOW HOW TO SECURE MY MR814V2 ROUTER


Hello! To secure your wireless router, have a look at this Knowledge Base article below. This will guide you through the steps of how to set up wireless security on your exact model router.

MR814v2 Wireless Router Security Configuration Guide

Best of luck!

Mar 16, 2009 | NetGear MR814 Wireless Router

1 Answer

Belkin router problem


VISTA and wireless don't go well together. First, I would disable your firewall, you can turn it on later when everything works and play with the settings, second use the hex value instead of the password key when logging into the wireless device, third try it both with windows managing the connection and with the vendor software. Some wireless prefer one or the other depending on their compatibility with the Vista virus.

Dec 09, 2008 | Belkin (F5D9230-4) Wireless Router...

1 Answer

Wireless connection of netgear wireless router for compaq laptop


When you look on the box that the router came in, you have to look to see what Operating Systems it is compatible with. In many cases, routers will not be compatible with vista. I have a Linksys WRT300N, and it works great with Vista.Hope this helps.

May 04, 2008 | NetGear WGR614 Wireless Router

3 Answers

Netgear Wireless router MR814v2


the problem is that the router is not issuing the DHCP address, put in a hard-coded address such as 192.168.0.5/255.255.255.0 with a gateway of 192.168.0.1 and then manually add the DNS server address of the IPS as well and it will kick into life

Dec 15, 2007 | NetGear MR814 Wireless Router

1 Answer

MR814v2 won't do the routing


hi ,,,, nothin to worry about it jus go into the routter seetings page and and then type http://routerlogin.com/CA_HiddenPage.htm and you will get a option to disable the router page configuration,once you do that, after that the page will not come up automatically,, it ll only come up whenever ya want it. n it will make ya go online ... if it persists , get back to me ..... take care --- samrat

Mar 27, 2007 | NetGear MR814 Wireless Router

Not finding what you are looking for?
NetGear MR814 Wireless Router Logo

Related Topics:

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...