Question about Canon PowerShot A570 IS Digital Camera
Sounds like the LCD's ribbon cable is not securely attached to its connector. If the camera's no longer under warranty, you'll need to open the camera, remove and then reseat the LCD ribbon cable into its connector. If you decide to attempt repair, remember its ultimately your responsibility, as things can and sometimes do go wrong. Also go no further than the first three pictures in the following disassembly guide.
Follow the LCD ribbon cable to its connector on the circuit board. Look for lift pins or a lift bar on the connector that you lift with your fingernail, or the flat edge of a screwdriver, to release the cable. After you release the cable, inspect the end of the cable to make sure its clean, then reinsert it in the connector, and close the lift pin/bar to secure it. Reassemble the camera, and try it out.
And finally, there is a risk of electrical shock inside all digital cameras with a flash. Recommend reading the following before opening any camera:
Posted on Feb 10, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 19, 2015 | Pix Cameras
Sep 11, 2009 | Toshiba 42H83 42" Rear Projection...
Mar 24, 2009 | Canon PowerShot S2 IS Digital Camera
Aug 11, 2008 | Cameras
Jan 14, 2008 | Canon PowerShot A530 Digital Camera
Nov 12, 2006 | Fuji FinePix S5000 Digital Camera
215 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: