Re: Connecting Projector to High Def Source (e.g. PS3...
That projector supports M1-D also which is the digital side of the M1-DA... Anyway, they sell cables that are M1-D to HDMI to which you can hook directly to the PS3. They are decently priced too, less than $20. I know this thread is old, but I came across it due to an issue I am having with my xb31, broken color wheel. Trying to find parts...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HI, Its not an HD (1080p) projector. So it will not be able to show HD picture. In HD projectors there will be an input named HDMI(
High-Definition Multimedia Interface ).This projector able to Show picture up to a resolution 1080i (HDTV) Though component video input. Check the link for its spec Specification Ajin
Connect a HDMI cable from your source device (cable box, Bluray, satellite receiver) to your HDTV for High Def video and audio. This is the best hookup for HD, even 1080p. For 3D HDTV, make sure to get a high-speed category 2 HDMI cable. Select proper HDMI input on the TV using the remote. HDMI means High Definition Multimedia Interface. Any newer digital TV (made after 2008) should have at least one HDMI input. https://sites.google.com/site/columbiaisa/diagrams_hookup_hdtv_hdmi
Please try this procedure to connect the PS3 to TV..
The PS3 has a Blu-ray drive that can be
used not only for playing games but also for watching high-definition
movies. The best way to connect a PS3 to a high-definition viewing
device such as a video projector is through the PS3's high-definition
multimedia interface (HDMI) output. The HDMI connection can transmit up
to 1080p high-definition from the PS3 to the video projector using a
single cable. Attaching and setting up the HDMI cable will only take a
few minutes and will let you watch high-definition video from the PS3 on
the video projector.
Attach one end of the HDMI cable
to the HDMI output connector of the PS3. Turn the HDMI cable around if
it does not slip right into the HDMI output, because the HDMI cable can
only fit into an HDMI connector one way.
Attach the other end of the HDMI cable to the HDMI input connector
that is on the video projector. Make sure both sides of the HDMI cable
is securely pushed into the connectors of the PS3 and of the video
projector. Turn on the video projector. Press the "Menu" button on the
video projector's remote. Navigate to the "Sources" setting on the video
projector's Menu. Select "HDMI" from the "Sources" setting. Press the
"Menu" button on the remote control again to exit the Menu.
Adjusting the PS3
Turn on the PS3. Wait for the
"Home" menu to appear on the video projector, although the quality of
the video seen from the video projector will be muddied and dark.
Navigate from the "Home" menu to the "Systems" icon using the game
controller and select the "Display Settings" tab. Choose "Video Output
Settings" from the list presented in the screen that appears. Press the
right side of the directional pad on the game controller to move to the
Choose "HDMI" from the list presented in the screen that appears.
Press the right side of the directional pad on the game controller to
move to the next screen. Choose "Automatic" from the list presented in
the screen that appears. Press the right side of the directional pad on
the game controller to move to the "Confirmation" screen. Press the "X"
button on the game controller to make the settings active. Return to the
PS3's "Home" menu.
Watching the PS3
Insert a Blu-ray disc into the
slot at the front of the PS3. Wait as the Blu-ray disc begins to play
the video content on the video projector from the PS3 through the HDMI
Please don't forget to rate my answer...I really appreciate any ratings you done..
You can connect PS3 video via HDMI to receiver and from receiver via HDMI to TV. But RX-V365 doesn't support HDMI audio, so you have to connect audio separately via SPDIF digital cable. I think PS3 uses optical SPDIF, so you will need optical cable. If you can't find cheaps optical cables in your shop, you can try byuing from ebay ($1-5 max.)
Your TV plays High Def material through either Input 4 (uses component cables R,G,B) or through Input 5 (Uses DVI cable).
Today most equipment uses HDMI cable for High Def or it may have a component (RGB) output that you can use. The DVI hookup is best, so you need a HDMI to DVI cable or Component Cables (Red, Green, Blue). You need some source that OUTPUTS High def (ex. 1080i) either through HDMI or component cable. You need to either connect the component cable(R,G,B) from the source to the Input 4 on the TV or connect the HDMI to DVI cable from the source to the Input 5.
You need to set the AV source on the TV to AV5 (if you are using the DVI input) or AV4 (if you are using component cables).
If you want to play Highdef source like Blue Ray then you can just connect the output of the blu ray player to your Tv using either the HDMI to DVI cable or component cable (Red, Green, Blue) and set the TV input to AV5 (for HDMI/DVI) or AV4 (for component).
But if you are trying to get Free High Def from an antenna then you will need to have a component that can OUTPUT high def. The $40 converter boxes don't do this - they simply convert the Digital signal to Analog (non high def). What you need is a High Def TUNER that OUTPUTS High Def. I was looking for one for this same reason and ordered the centronics ZAT 502 HD. But it cost about $80. Then I saw that Tivo had an upgrade deal where I could upgrade my existing Series 2 Tivo to Tivo HD for $99. It has a High Def Tuner in it. So I cancelled my order with Centronics and got the Tivo. In any case if you want Over the air HD you will need a High Def Tuner that will OUTPUT 1080.
Only If you Play high def or blue ray disks on the player///regular disks will look even better then before but not quite as good as a high def or blue-ray disk!
I hope this fixes ya up!
(please use the rateings so we can keep this site FREE!)
Hi, first of all you need a high definition source. I'm not sure if your cable box is HD but lets take it as an example. The component leads which you are using isn't 'true' HD video quality, what you need is a hdmi cable from your source to your TV.
Your cable box maybe HD with a HDMI output, if it is then you need the lead to come out of the cable box into your tv's HDMI input using a HDMI lead. Then you switch your TV's source to the HDMI input and it then should be producing a HD quality picture, but to truly get the full HD experience you may want to subscripe to a HD channel or purchase a blueray player becasue most cable TV channels are upscaled to HD and the definition is not as good as on a blue ray disc or a true HD channel.
So in conclusion the cable and input you are using is not designed for HD input. I believe your TV is HD, check for HDMI inputs or DVI inputs.
The pixelation is probably caused by MPEG2 compression on the DVD and Virgin media video streams, the blur is probably caused becasue you are displaying a standard definition signal on a high definition TV.
However if a high-def source still has these problems then you may have a faulty TV, your best bet is too hook up a high-def source such as a HD/Blu-ray player or PS3/360 games console.
Should a high-def source look ok, then you may have some look changing the display settings on the TV to try and improve picture sharpness and color balance.